Connectors for electronic equipment - Tests and measurements - Part 1-2: General examination - Test 1b: Examination of dimension and mass

Defines a standard test method for the examination of dimension and mass of electromechanical components (essentially connectors). The measurements are made on the actual parts with the aid of suitable measuring tools and measuring equipment in compliance with the relevant specification.

Steckverbinder für elektronische Einrichtungen - Mess- und Prüfverfahren - Teil 1-2: Allgemeine Untersuchungen - Prüfung 1b: Maß- und Gewichtsprüfung

Connecteurs pour équipements électroniques - Essais et mesures - Partie 1-2: Examen général - Essai 1b: Examen de dimension et masse

Définit une méthode d'essai normalisée pour l'examen de dimension et masse des composants électromécaniques (essentiellement des connecteurs). Les mesures sont effectuées sur les composants, pour vérifier leur conformité à la spécification correspondante, en utilisant des montages de mesure et des appareils de mesure appropriés.

Connectors for electronic equipment - Tests and measurements - Part 1-2: General examination - Test 1b: Examination of dimension and mass (IEC 60512-1-2:2002)

General Information

Status
Published
Publication Date
11-Apr-2002
Withdrawal Date
31-Mar-2005
Technical Committee
Drafting Committee
Parallel Committee
Current Stage
6060 - Document made available - Publishing
Start Date
12-Apr-2002
Completion Date
12-Apr-2002

Buy Standard

Standard
EN 60512-1-2:2003
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SIST EN 60512-1-2:2003SLOVENSKIoktober 2003
STANDARDConnectors for electronic equipment - Tests and measurements - Part 1-2: General examination - Test 1b: Examination of dimension and mass (IEC
60512-1-2:2002)©
Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljenoReferenčna številkaSIST EN 60512-1-2:2003(en)ICS31.220.10







EUROPEAN STANDARDEN 60512-1-2NORME EUROPÉENNEEUROPÄISCHE NORMApril 2002CENELECEuropean Committee for Electrotechnical StandardizationComité Européen de Normalisation ElectrotechniqueEuropäisches Komitee für Elektrotechnische NormungCentral Secretariat: rue de Stassart 35, B - 1050 Brussels© 2002 CENELEC -All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.Ref. No. EN 60512-1-2:2002 EICS 31.220.10English versionConnectors for electronic equipment –Tests and measurementsPart 1-2: General examination –Test 1b: Examination of dimension and mass(IEC 60512-1-2:2002)Connecteurs pour équipementsélectroniques –Essais et mesuresPartie 1-2: Examen général –Essai 1b: Examen de dimensionet masse(CEI 60512-1-2:2002)Steckverbinder für elektronischeEinrichtungen –Mess- und PrüfverfahrenTeil 1-2: Allgemeine Untersuchungen -Prüfung 1b: Maß- und Gewichtsprüfung(IEC 60512-1-2:2002)This European Standard was approved by CENELEC on 2002-04-01. CENELEC members are bound tocomply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration.Up-to-date lists and bibliographical references concerning such national standards may be obtained onapplication to the Central Secretariat or to any CENELEC member.This European Standard exists in three official versions (English, French, German). A version in any otherlanguage made by translation under the responsibility of a CENELEC member into its own language andnotified to the Central Secretariat has the same status as the official versions.CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands,Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.



EN 60512-1-2:2002- 2 -ForewordThe text of document 48B/1129/FDIS, future edition 1 of IEC 60512-1-2, prepared by SC 48B,Connectors, of IEC TC 48, Electromechanical components and mechanical structures for electronicequipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC asEN 60512-1-2 on 2002-04-01.The following dates were fixed:–latest date by which the EN has to be implementedat national level by publication of an identicalnational standard or by endorsement(dop)2003-01-01–latest date by which the national standards conflictingwith the EN have to be withdrawn(dow)2005-04-01__________Endorsement noticeThe text of the International Standard IEC 60512-1-2:2002 was approved by CENELEC as aEuropean Standard without any modification.__________



NORMEINTERNATIONALECEIIECINTERNATIONALSTANDARD60512-1-2Première éditionFirst edition2002-02Connecteurs pour équipements électroniques –Essais et mesures –Partie 1-2:Examen général –Essai 1b: Examen de dimension et masseConnectors for electronic equipment –Tests and measurements –Part 1-2:General examination –Test 1b: Examination of dimension and massPour prix, voir catalogue en vigueurFor price, see current catalogue IEC 2002
Droits de reproduction réservés

Copyright - all rights reservedAucune partie de cette publication ne peut être reproduite niutilisée sous quelque forme que ce soit et par aucun procédé,électronique ou mécanique, y compris la photocopie et lesmicrofilms, sans l'accord écrit de l'éditeur.No part of this publication may be reproduced or utilized in anyform or by any means, electronic or mechanical, includingphotocopying and microfilm, without permission in writing fromthe publisher.International Electrotechnical Commission,
3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, SwitzerlandTelephone: +41 22 919 02 11
Telefax: +41 22 919 03 00
E-mail: inmail@iec.ch
Web: www.iec.chCODE PRIXPRICE CODEDCommission Electrotechnique InternationaleInternational Electrotechnical Commission



60512-1-2  IEC:2002– 3 –INTERNATIONAL ELECTROTECHNICAL COMMISSION____________CONNECTORS FOR ELECTRONIC EQUIPMENT –TESTS AND MEASUREMENTS –Part 1-2: General examination –Test 1b: Examination of dimension and massFOREWORD1)The IEC (International Electrotechnical Commission) is a worldwide organization for standardization comprisingall national electrotechnical committees (IEC National Committees). The object of the IEC is to promoteinternational co-operation on all questions concerning standardization in the electrical and electronic fields. Tothis end and in addition to other activities, the IEC publishes International Standards. Their preparation isentrusted to technical committ
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.