Optical fibres - Part 2: Product specifications - General

IEC 60793-2:2011 contains the general specifications for both multimode and single-mode optical fibres. Sectional specifications for each of the four categories multimode class: A1, A2, A3, and A4 contain requirements specific to each category. Sectional specifications for each of the two single-mode classes, B and C, contain requirements common to each class. Each sectional specification includes family specifications (in normative annexes) that contain requirements for the applicable category or sub-categories. These sub-categories are distinguished on the basis of different fibre types or applications. The requirements of this standard apply to all classes. This seventh edition cancels and replaces the sixth edition published in 2007. This modification has been necessary because of the addition of new fibre categories to IEC 60793-2-10 and IEC 60793-2-50.
This publication is to be read in conjunction with IEC 60793-1 series.

Lichtwellenleiter - Teil 2: Produktspezifikationen - Allgemeines

Fibres optiques - Partie 2: Spécifications de produits - Généralités

L'IEC 60793-2:2015 contient les spécifications générales applicables à la fois aux fibres optiques unimodales et multimodales. Les spécifications intermédiaires pour chacune des catégories des quatre fibres multimodales: A1, A2, A3 et A4 (parties de la classe de fibres multimodales A) contiennent les exigences spécifiques à chaque catégorie. Les spécifications intermédiaires pour chacune des deux classes de fibres unimodales, B et C, contiennent les exigences communes à chaque classe. Chaque spécification intermédiaire inclut des spécifications de famille (dans les annexes normatives) qui contiennent des exigences pour la catégorie ou les sous-catégories applicables. La distinction entre ces différentes sous-catégories se fonde sur les différents types de fibres ou les différentes applications. Les exigences de la présente norme s'appliquent à toutes les classes. Chaque spécification intermédiaire contient les exigences qui sont communes à toutes les spécifications de famille qu'elle regroupe. Ces exigences communes sont reprises dans la spécification de famille pour qu'il soit plus facile de s'y référer. Les essais ou les méthodes de mesure sont définis pour chaque attribut spécifié. Dans la mesure du possible, ces définitions se font par référence à une norme IEC - si ce n'est pas le cas, l'essai ou la méthode de mesure est indiqué dans la spécification intermédiaire correspondante. Cette huitième édition annule et remplace la septième édition parue en 2011. Cette édition constitue une révision technique rendue nécessaire par l'ajout de nouveaux modèles de fibre à la catégorie A1 de l'IEC 60793-2-10. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: - ajout de deux nouvelles sous-catégories A3f et A3g indiquées comme étant "à l'étude", car elles n'ont pas encore été complètement normalisées au moment de la finalisation du présent document; - modification de l'en-tête de la colonne "Ouverture numérique" du Tableau 3 conformément aux récentes modifications de toutes les spécifications de produits en multimodal A1, A2, A3 et A4 (NAff uniquement). Cette publication doit être lue conjointement avec la IEC 60793-1 series . Mots clés: spécifications applicables à la fois aux fibres optiques unimodales et multimodales

Optična vlakna - 2. del: Specifikacije izdelka - Splošno (IEC 60793-2:2015)

Standard IEC 60793-2:2011 zajema splošne specifikacije za večrodna in enorodna optična vlakna. Področne specifikacije za vsako od štirih kategorij večrodnega razreda: A1, A2, A3 in A4 vključujejo zahteve, ki so značilne za vsako kategorijo. Področne specifikacije za oba enorodna razreda, tj. B in C, vsebujejo zahteve, ki so skupne obema razredoma. Vsaka področna specifikacija zajema skupinske specifikacije (v normativnih dodatkih), ki vključujejo zahteve za ustrezno kategorijo ali podkategorije. Te podkategorije se razlikujejo glede na različne vrste ali načine uporabe vlaken. Zahteve tega standarda se uporabljajo za vse razrede. Sedma izdaja razveljavlja in nadomešča šesto izdajo, objavljeno leta 2007. Ta sprememba je bila potrebna zaradi dodajanja novih kategorij vlaken v standarda IEC 60793-2-10 in IEC 60793-2-50.

General Information

Status
Withdrawn
Publication Date
16-Jun-2016
Withdrawal Date
16-Jun-2019
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
19-Dec-2022
Completion Date
19-Dec-2022

Relations

Buy Standard

Standard
EN 60793-2:2016 - BARVE
English language
18 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60793-2:2016
01-september-2016
1DGRPHãþD
SIST EN 60793-2:2012
2SWLþQDYODNQDGHO6SHFLILNDFLMHL]GHOND6SORãQR ,(&
Optical fibres - Part 2: Product specifications - General (IEC 60793-2:2015)
Lichtwellenleiter - Teil 2: Produktspezifikationen - Allgemeines
Fibres optiques - Partie 2: Spécifications de produits - Généralités
Ta slovenski standard je istoveten z: EN 60793-2:2016
ICS:
33.180.10 2SWLþQD YODNQDLQNDEOL Fibres and cables
SIST EN 60793-2:2016 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60793-2:2016

---------------------- Page: 2 ----------------------

SIST EN 60793-2:2016


EUROPEAN STANDARD EN 60793-2

NORME EUROPÉENNE

EUROPÄISCHE NORM
June 2016
ICS 33.180.10 Supersedes EN 60793-2:2012
English Version
Optical fibres - Part 2: Product specifications - General
(IEC 60793-2:2015)
Fibres optiques - Partie 2: Spécifications de produits - Lichtwellenleiter - Teil 2: Produktspezifikationen -
Généralités Allgemeines
(IEC 60793-2:2015) (IEC 60793-2:2015)
This European Standard was approved by CENELEC on 2015-12-09. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 60793-2:2016 E

---------------------- Page: 3 ----------------------

SIST EN 60793-2:2016
EN 60793-2:2016
European foreword
The text of document 86A/1645/CDV, future edition 8 of IEC 60793-2, prepared by SC 86A "Fibres
and cables" of IEC/TC 86 "Fibre optics" was submitted to the IEC-CENELEC parallel vote and
approved by CENELEC as EN 60793-2:2016.

The following dates are fixed:
(dop) 2016-12-17
• latest date by which the document has to be
implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2019-06-17
standards conflicting with the
document have to be withdrawn

This document supersedes EN 60793-2:2012.

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.

Endorsement notice
The text of the International Standard IEC 60793-2:2015 was approved by CENELEC as a European
Standard without any modification.
2

---------------------- Page: 4 ----------------------

SIST EN 60793-2:2016
EN 60793-2:2016

Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant

EN/HD applies.

NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60304 -  Standard colours for insulation for low- HD 402 S2 -
frequency cables and wires
IEC 60793-1 series Optical fibres EN 60793-1 series
IEC 60793-2-10 -  EN 60793-2-10 -
IEC 60793-2-20 -  EN 60793-2-20 -
IEC 60793-2-30 -  EN 60793-2-30 -
IEC 60793-2-40 -  Optical fibres -- Part 40: Product EN 60793-2-40
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.