Fibre optic interconnecting devices and passive components performance standard - Part 062-6: Non-connectorized single-mode fibre optic pigtailed isolators for category O - Uncontrolled environment and sequential test

This part of IEC 61753 contains the minimum test and measurement requirements and severities which a fibre optic isolator must satisfy in order to be categorized as meeting the requirements of isolator devices used in outside plant environments. The requirements cover non-connectorized single-mode fibre optic pigtailed isolators for category O used in an uncontrolled environment and a sequential test.

Lichtwellenleiter - Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil 062-6: Nicht mit Steckern versehene Einmoden-LWL-Isolatoren für die Kategorie O - Freiluftanlagen und Prüffolge

Norme de qualité de fonctionnement des dispositifs d'interconnexion et composants passifs à fibres optiques - Partie 062-6: Isolateurs à fibres optiques monomodales à fibre amorce non connectorisés pour la catégorie O - Environnement non contrôlé et essai séquentiel

La présente partie de la CEI 61753 contient les sévérités et les exigences minimales d'essai et de mesure auxquelles un isolateur à fibres optiques doit satisfaire afin d'être classé comme conforme aux exigences des dispositifs d'isolateurs utilisés pour les installations dans un environnement extérieur. Les exigences couvrent les isolateurs à fibres optiques monomodales à fibre amorce non connectorisés pour la catégorie O, destinés à un environnement non contrôlé et à des essais séquentiels.

Standard lastnosti naprav za medsebojno povezovanje optičnih vlaken in pasivne komponente - 062-6. del: Nespojeni enorodni optični spojitveni izolatorji za kategorijo O - Zunanje okoljsko in sekvenčno preskušanje (IEC 61753-062-6:2007)

General Information

Status
Withdrawn
Publication Date
17-Jan-2008
Withdrawal Date
30-Nov-2010
Current Stage

Buy Standard

Standard
EN 61753-062-6:2008
English language
19 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61753-062-6:2008
01-marec-2008
6WDQGDUGODVWQRVWLQDSUDY]DPHGVHERMQRSRYH]RYDQMHRSWLþQLKYODNHQLQSDVLYQH
NRPSRQHQWHGHO1HVSRMHQLHQRURGQLRSWLþQLVSRMLWYHQLL]RODWRUML]D
NDWHJRULMR2=XQDQMHRNROMVNRLQVHNYHQþQRSUHVNXãDQMH ,(&
Fibre optic interconnecting devices and passive components performance standard -
Part 062-6: Non-connectorized single-mode fibre optic pigtailed isolators for category O -
Outside plant environment and sequential test (IEC 61753-062-6:2007)
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil
062-6: Nicht mit Steckern versehene Einmoden-LWL-Isolatoren für die Kategorie O -
Freiluftanlagen und Prüffolge (IEC 61753-062-6:2007)
Norme de qualité de fonctionnement des dispositifs d'interconnexion et composants
passifs à fibres optiques - Partie 062-6: Isolateurs à fibres optiques monomodales à fibre
amorce non connectorisés pour la catégorie O - Environnement non contrôlé et essai
séquentiel (CEI 61753-062-6:2007)
Ta slovenski standard je istoveten z: EN 61753-062-6:2008
ICS:
33.180.20
SIST EN 61753-062-6:2008 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN 61753-062-6

NORME EUROPÉENNE
January 2008
EUROPÄISCHE NORM

ICS 33.180.20


English version


Fibre optic interconnecting devices and passive components
performance standard -
Part 062-6: Non-connectorized single-mode fibre optic pigtailed isolators
for category O -
Uncontrolled environment and sequential test
(IEC 61753-062-6:2007)

Norme de qualité de fonctionnement  Lichtwellenleiter -
des dispositifs d'interconnexion Verbindungselemente
et composants passifs à fibres optiques - und passive Bauteile -
Partie 062-6: Isolateurs à fibres optiques Betriebsverhalten -
monomodales à fibre amorce
Teil 062-6: Nicht mit Steckern versehene
non connectorisés pour la catégorie O - Einmoden-LWL-Isolatoren
Environnement non contrôlé für die Kategorie O -
et essai séquentiel Freiluftanlagen und Prüffolge
(CEI 61753-062-6:2007) (IEC 61753-062-6:2007)


This European Standard was approved by CENELEC on 2007-12-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2008 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61753-062-6:2008 E

---------------------- Page: 2 ----------------------

EN 61753-062-6:2008 – 2 –
Foreword
The text of document 86B/2529/FDIS, future edition 1 of IEC 61753-062-6, prepared by SC 86B, Fibre
optic interconnecting devices and passive components, of IEC TC 86, Fibre optics, was submitted to the
IEC-CENELEC parallel vote and was approved by CENELEC as EN 61753-062-6 on 2007-12-01.
The following dates were fixed:

– latest date by which the EN has to be implemented

at national level by publication of an identical
(dop) 2008-09-01
national standard or by endorsement

– latest date by which the national standards conflicting
(dow) 2010-12-01
with the EN have to be withdrawn
Annex ZA has been added by CENELEC.
__________
Notice
This document contains material that is Copyright © 2006, Telcordia Technologies, Inc. ("Telcordia").
All rights reserved.
The reader is advised that this IEC document and Telcordia source(s) may differ, and the context and use
of said material in this IEC document may differ from that of Telcordia. Telcordia makes no representation
or warranty, express or implied, with respect to the sufficiency, accuracy, or utility of any information or
opinion contained herein. Any use of or reliance
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.