EN 61300-2-19:2005

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-19: Tests - Damp heat (steady state)

Details a procedure for determining the suitability of a fibre optic device to withstand the environmental condition of high humidity and high temperature which may occur in actual use, storage and/or transport.

Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und Messverfahren - Teil 2-19: Prüfungen - Feuchte Wärme (konstant)

Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes fondamentales d'essais et de mesures - Partie 2-19: Essais - Chaleur humide (essai continu)

Déterminer l'aptitude d'un dispositif à fibres optiques à supporter la condition d'environnement à humidité élevée et haute température qui peut se produire en cours d'utilisation réelle, de stockage et/ou de transport.

Naprave za medsebojno povezovanje optičnih kablov in pasivne komponente – Osnovni preskusni in merilni postopki – 2-19. del: Preskusi – Pregreta para (ustaljeno stanje) (IEC 61300-2-19:2005)

General Information

• Status: Withdrawn
• Publication Date: 13-Oct-2005
• Withdrawal Date: 31-May-2008
• ICS: 33.180.20 - Fibre optic interconnecting devices
• Technical Committee: CLC/TC 86BXA - Fibre optic interconnect, passive and connectorised components
• Drafting Committee: IEC/SC 86B - IEC_SC_86B
• Parallel Committee: IEC/SC 86B - IEC_SC_86B
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 12-Dec-2013
• Completion Date: 12-Dec-2013
• Ref Project: SIST EN 61300-2-19:2006 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 2-19: Tests - Damp heat (steady state)

Relations

• Replaces: EN 61300-2-19:1997 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-19: Tests - Damp heat (steady state)
• Effective Date: 29-Jan-2023
• Replaced By: EN 61300-2-19:2013 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-19: Tests - Damp heat (steady state)
• Effective Date: 28-Jan-2023

Standards Content (Sample)

SLOVENSKI SIST EN 61300-2-19:2006

STANDARD
marec 2006
Naprave za medsebojno povezovanje optičnih kablov in pasivne komponente
– Osnovni preskusni in merilni postopki – 2-19. del: Preskusi – Pregreta para
(ustaljeno stanje) (IEC 61300-2-19:2005)
Fibre optic interconnecting devices and passive components - Basic test and
measurement procedures - Part 2-19: Tests - Damp heat (steady state) (IEC 61300-
2-19:2005)
ICS 33.180.20 Referenčna številka
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

EUROPEAN STANDARD EN 61300-2-19
NORME EUROPÉENNE
EUROPÄISCHE NORM October 2005

ICS 33.180.20 Supersedes EN 61300-2-19:1997

English version
Fibre optic interconnecting devices and passive components –
Basic test and measurement procedures
Part 2-19: Tests – Damp heat (steady state)
(IEC 61300-2-19:2005)
Dispositifs d'interconnexion et Lichtwellenleiter –
composants passifs à fibres optiques – Verbindungselemente und passive
Méthodes fondamentales d'essais Bauteile –
et de mesures Grundlegende Prüf- und Messverfahren
Partie 2-19: Essais – Teil 2-19: Prüfungen –
Chaleur humide (essai continu) Feuchte Wärme (konstant)
(CEI 61300-2-19:2005) (IEC 61300-2-19:2005)

This European Standard was approved by CENELEC on 2005-06-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden,
Switzerland and United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels

© 2005 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 61300-2-19:2005 E
Foreword
The text of document 86B/2080/FDIS, future edition 2 of IEC 61300-2-19, prepared by SC 86B, Fibre
optic interconnecting devices and passive components, of IEC TC 86, Fibre optics, was submitted to
the IEC-CENELEC parallel vote and was approved by CENELEC as EN 61300-2-19 on 2005-06-01.
This European Standard supersedes EN 61300-2-19:1997.
It constitutes a technical revision of severities.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2006-05-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2008-06-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61300-2-19:2005 was approved by CENELEC as a
European Standard without any modification.
__________
- 3 - EN 61300-2-19:2005
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE Where an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
1) 2)
IEC 60068-2-78 – Environmental testing EN 60068-2-78 2001
Part 2-78: Tests - Test Cab: Damp heat,
steady state
1) 2)
IEC 61300-3-3 – Fibre optic interconnecting devices and EN 61300-3-3 2003
passive components - Basic test and
measurement procedures
Part 3-3: Examinations and measurements -
Active monitoring of changes in attenuation
and return loss
1) 2)
IEC 61300-3-4 – Part 3-4: Examinations and measurements - EN 61300-3-4 2001
Attenuation
1)
undated reference.
2)
valid edition at date of issue.

NORME CEI
INTERNATIONALE IEC
61300-2-19
INTERNATIONAL
Deuxième édition
STANDARD
Second edition
2005-03
Dispositifs d'interconnexion et
composants passifs à fibres optiques –
Méthodes fondamentales d'essais et de mesures –
Partie 2-19:
Essais – Chaleur humide (essai continu)

Fibre optic interconnecting devices
and passive components –
Basic test and measurement procedures –
Part 2-19:
Tests – Damp heat (steady state)
 IEC 2005 Droits de reproduction réservés  Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including
électronique ou mécanique, y compris la photocopie et les photocopying and microfilm, without permission in writing from
microfilms, sans l'accord écrit de l'éditeur. the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: [phone] Telefax: [phone] E-mail: [e-mail] Web: www.iec.ch
CODE PRIX
Commission Electrotechnique Internationale PRICE CODE G
International Electrotechnical Commission
Международная Электротехническая Комиссия
Pour prix, voir catalogue en vigueur
For price, see current catalogue

61300-2-19  IEC:2005 – 3 –
CONTENTS
FOREWORD .5

1 Scope .9
2 Normative references .9
3 General description .9
4 Apparatus .9
4.1 Chamber .9
4.2 Steam .11
4.3 Optical source and detector .11
5 Procedure .11
5.1 Preconditioning .11
5.2 Initial examinations and measurements.11
5.3 Conditioning .11
5.4 Recovery.13
5.5 Final examinations and measurements .13
6 Severity.13
7 Details to be specified .13

61300-2-19  IEC:2005 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
___________
FIBRE OPTIC INTERCONNECTING DEVICES
AND PASSIVE COMPONENTS –
BASIC TEST AND MEASUREMENT PROCEDURES –

Part 2-19: Tests – Damp heat (steady state)

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this pr
...