EN 50289-3-13:2003
(Main)Communication cables - Specifications for test methods - Part 3-13: Mechanical test methods - Aeolian vibration
Communication cables - Specifications for test methods - Part 3-13: Mechanical test methods - Aeolian vibration
This Part 3-13 of EN 50289 details the method of test to determine the ability of exposed overhead cables used in analogue and digital communication systems to withstand dynamic stresses similar to those imposed by laminar wind flow induced vibrations in overhead lines. It is to be read in conjunction with Part 3-1 of EN 50289, which contains essential provisions for its application.
Kommunikationskabel - Spezifikationen für Prüfverfahren - Teil 3-13: Mechanische Prüfverfahren - Seilschwingen
Câbles de communication - Spécification des méthodes d'essais - Partie 3-13: Méthodes d'essais mécaniques - Vibration éolienne
Communication cables - Specifications for test methods - Part 3-13: Mechanical test methods - Aeolian vibration
General Information
Standards Content (Sample)
SLOVENSKI SIST EN 50289-3-13:2004
STANDARD
april 2004
Communication cables - Specifications for test methods - Part 3-13: Mechanical test
methods - Aeolian vibration
ICS 33.120.10 Referenčna številka
SIST EN 50289-3-13:2004(en)
© Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno
---------------------- Page: 1 ----------------------
EUROPEAN STANDARD EN 50289-3-13
NORME EUROPÉENNE
EUROPÄISCHE NORM August 2003
ICS 33.120.10
English version
Communication cables -
Specifications for test methods
Part 3-13: Mechanical test methods -
Aeolian vibration
Câbles de communication - Kommunikationskabel -
Spécification des méthodes d'essais Spezifikationen für Prüfverfahren
Partie 3-13: Méthodes d'essais Teil 3-13: Mechanische Prüfverfahren -
mécaniques - Seilschwingen
Vibration éolienne
This European Standard was approved by CENELEC on 2003-04-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2003 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 50289-3-13:2003 E
---------------------- Page: 2 ----------------------
EN 50289-3-13:2003 – 2 –
Foreword
This European Standard was prepared by the Technical Committee CENELEC TC 46X,
Communication cables.
The text of the draft was submitted to the Unique Acceptance Procedure and was accepted by
CENELEC as EN 50289-3-13 on 2003-04-01.
The following dates were fixed:
- latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2004-04-01
- latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2006-04-01
This European Standard has been prepared under the European Mandate M/212 given to
CENELEC by the European Commission and the European Free Trade Association.
__________
---------------------- Page: 3 ----------------------
– 3 – EN 50289-3-13:2003
Contents
1 Scope. 4
2 Normative references . 4
3 Definitions. 4
4 Test method. 4
4.1 Sample. 4
4.2 Equipment.4
4.3 Procedure.5
4.4 Details to be specified . 6
5 Requirements. 6
6 Test report. 6
Figure 1 – Typical test arrangement for aeolian vibration test. 8
---------------------- Page: 4 ----------------------
EN 50289-3-13:2003 – 4 –
1 Scope
This Part 3-13 of EN 50289 details the method of test to determine the ability of exposed
overhead cables used in analogue and digital communication s
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.