EN 60317-0-10:2017
(Main)Specifications for particular types of winding wires - Part 0-10: General requirements - Polyester glass-fibre wound fused, unvarnished, or resin or varnish impregnated, bare or enamelled round copper wire
Specifications for particular types of winding wires - Part 0-10: General requirements - Polyester glass-fibre wound fused, unvarnished, or resin or varnish impregnated, bare or enamelled round copper wire
IEC 60317-0-10:2017 specifies the general requirements of polyester glass-fibre wound fused, unvarnished, or resin or varnish impregnated bare, grade 1 or grade 2 or enamelled round copper winding wires. The range of nominal conductor dimensions is given in Table 1, Table 2, Table A.1 and Table A.2. Keywords: insulated wires used for windings
Technische Lieferbedingungen für bestimmte Typen von Wickeldrähten – Teil 0-10: Allgemeine Anforderungen – Runddrähte aus Kupfer, blank oder lackiert, mit Polyesterglasfasern umwickelt und verschmolzen, nicht lackiert oder mit Harz oder mit Lack imprägniert
Spécifications pour types particuliers de fils de bobinage - Partie 0-10: Exigences générales - Fil de section circulaire en cuivre nu ou émaillé, guipé de fibres de verre polyester fondues, non vernies ou imprégnées de vernis ou de résine
IEC 60317-0-10:2017 spécifie les exigences générales pour le fil de section circulaire en cuivre nu ou émaillé de grade 1 ou de grade 2, guipé de fibres de verre polyester fondues, non vernies ou imprégnées de résine ou de vernis. La gamme des dimensions nominales des conducteurs est donnée dans le Tableau 1, le Tableau 2, le Tableau A.1 et le Tableau A.2. Mots clés: fils isolés utilisés pour les enroulements
Specifikacije za posebne vrste navijalnih žic - 0-10. del: Splošne zahteve - Bakrena žica z okroglim prerezom, ovita s poliesterskim steklenim vlaknom in impregnirana s silikonsko smolo ali lakom, gola ali emajlirana (IEC 60317-0-10:2017)
Ta del standarda IEC 60317 določa splošne zahteve za bakreno žico z okroglim prerezom, ovito s poliestrskim steklenim vlaknom, nepremazano ali impregnirano s smolo ali lakom, golo, razreda 1 ali 2, ali emajlirano.
Obseg nazivnih mer kondenzatorja je podan v razpredelnicah 1, 2, A.1 in A.2.
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Specifikacije za posebne vrste navijalnih žic - 0-10. del: Splošne zahteve - Bakrena žica z okroglim prerezom, ovita s poliesterskim steklenim vlaknom in impregnirana s silikonsko smolo ali lakom, gola ali emajlirana (IEC 60317-0-10:2017)Specifications for particular types of winding wires - Part 0-10: General requirements - Polyester Glass fibre wound, resin or varnish impregnated, bare or enamelled round copper wire (IEC 60317-0-10:2017)77.150.30Bakreni izdelkiCopper products29.060.10ŽiceWiresICS:Ta slovenski standard je istoveten z:EN 60317-0-10:2017SIST EN 60317-0-10:2017en01-oktober-2017SIST EN 60317-0-10:2017SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 60317-0-10
August 2017 ICS 29.060.10
English Version
Specifications for particular types of winding wires -
Part 0-10: General requirements - Polyester glass-fibre wound fused, unvarnished, or resin or varnish impregnated,
bare or enamelled round copper wire (IEC 60317-0-10:2017)
Spécifications pour types particuliers de fils de bobinage - Partie 0-10: Exigences générales - Fil de section circulaire en cuivre nu ou émaillé, guipé de fibres de verre polyester fondues, non vernies ou imprégnées de vernis ou de résine (IEC 60317-0-10:2017)
Technische Lieferbedingungen für bestimmte Typen von Wickeldrähten - Teil 0-10: Allgemeine Anforderungen -
Mit unbeschichteten Polyesterglasfasern umwickelt und verschmolzen oder mit Harz oder Lack imprägnierter blanker oder lackisolierter Runddraht aus Kupfer (IEC 60317-0-10:2017) This European Standard was approved by CENELEC on 2017-06-08. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17,
B-1000 Brussels © 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 60317-0-10:2017 E SIST EN 60317-0-10:2017
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 60317-0-10:2017 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60264 NOTE Harmonized in EN 60264 series. IEC 60317 NOTE Harmonized in EN 60317 series. IEC 60317-70 NOTE Harmonized as EN 60317-70. IEC 60317-71 NOTE Harmonized as EN 60317-71. IEC 60317-72 NOTE Harmonized as EN 60317-72. IEC 60851-6:2012 NOTE Harmonized as EN 60851-6:2012 (not modified). SIST EN 60317-0-10:2017
Normative references to international publications with their corresponding European publications The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu.
Publication Year Title EN/HD Year IEC 60851 series
Winding wires - Test methods EN 60851 series
IEC 60851-5 2008
Winding wires - Test methods -
Part 5: Electrical properties EN 60851-5 2008
ISO 3 -
Preferred numbers - Series of preferred numbers - -
IEC 60317-0-10 Edition 1.0 2017-05 INTERNATIONAL STANDARD NORME INTERNATIONALE Specifications for particular types of winding wires –
Part 0-10: General requirements – Polyester glass-fibre wound fused, unvarnished, or resin or varnish impregnated, bare or enamelled round copper wire
Spécifications pour types particuliers de fils de bobinage –
Partie 0-10: Exigences générales – Fil de section circulaire en cuivre nu ou émaillé, guipé de fibres de verre polyester fondues, non vernies ou imprégnées de vernis ou de résine
INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE
ICS 29.060.10
ISBN 978-2-8322-4261-2
– 2 – IEC 60317-0-10:2017 IEC 2017 CONTENTS FOREWORD . 4 INTRODUCTION . 6 1 Scope . 7 2 Normative references . 7 3 Terms, definitions, general notes and appearance . 7 3.1 Terms and definitions . 7 3.2 General notes . 8 3.2.1 Methods of test . 8 3.2.2 Winding wire . 9 3.3 Appearance . 9 4 Dimensions. 9 4.1 Conductor diameter . 9 4.2 Out of roundness of conductor . 11 4.3 Minimum increase in diameter due to the covering . 11 4.4 Maximum overall diameter . 11 5 Electrical resistance . 12 6 Elongation . 12 7 Springiness . 12 7.1 Nominal conductor diameters up to and including 1,600 mm . 12 7.2 Nominal conductor diameters over 1,600 mm . 12 8 Flexibility and adherence . 12 8.1 Mandrel winding test . 12 8.2 Adherence test . 12 9 Heat shock . 13 10 Cut-through . 13 11 Resistance to abrasion . 13 12 Resistance to solvents . 13 13 Breakdown voltage . 13 13.1 Polyester glass fibre covered bare round copper wire . 13 13.2 Polyester glass fibre covered enamelled round copper wire . 13 14 Continuity of insulation . 14 15 Temperature index . 14 16 Resistance to refrigerants . 14 17 Solderability . 14 18 Heat or solvent bonding . 14 19 Dielectric dissipation factor . 14 20 Resistance to transformer oil . 14 21 Loss of mass . 14 23 Pin hole test . 15 30 Packaging . 15 Annex A (informative)
Diameters for intermediate nominal conductor diameters (R40) . 16 Annex B (informative)
Resistance . 18 B.1 Determination of nominal resistance . 18 Annex C (informative)
High temperature failure . 19 SIST EN 60317-0-10:2017
IEC 60317-0-10:2017 IEC 2017 – 3 –
Bibliography . 20
Table 1 – Dimensional requirements of (single) polyester glass-fibre wound fused and unvarnished or resin or varnish impregnated over grade 1 or grade 2 enamelled round copper winding wire (R20) . 10 Table 2 – Dimensional requirements of (double) polyester glass-fibre wound fused and unvarnished or resin or varnish impregnated over bare, grade 1, or grade 2 enamelled round copper winding wire (R20) . 11 Table 3 – Elongation . 12 Table 4 – Mandrel winding . 12 Table 5 – Breakdown voltage for bare round copper wire . 13 Table 6 – Breakdown voltage for enamelled round copper wire . 14 Table A.1 – Diameters for single polyester glass-fibre wound fused and unvarnished or resin or varnish impregnated over grade 1 or grade 2 enamelled round copper wire (R40) . 16 Table A.2 – Diameters for double polyester glass-fibre wound fused and unvarnished or resin or varnish impregnated over bare, grade 1 or grade 2 enamelled round copper wire (R40) . 17 Table B.1 – Electrical resistance . 18
– 4 – IEC 60317-0-10:2017 IEC 2017 INTERNATIONAL ELECTROTECHNICAL COMMISSION ____________
SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES –
Part 0-10: General requirements –
Polyester glass-fibre wound fused, unvarnished, or resin
or varnish impregnated, bare or enamelled round copper wire
FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.