EN 61076-4-116:2012

Connectors for electronic equipment - Product requirements - Part 4-116: Printed board connectors - Detail specification for a high-speed two-part connector with integrated shielding function

IEC 61076-4-116:2012 establishes specifications and test requirements for a high-speed two-part connector with integrated shielding function for use as a printed board connector in industrial environments. The connectors connect a backplane to printed boards. Keywords: Connector, Printed board connector.

Steckverbinder für elektronische Einrichtungen - Produktanforderungen - Teil 4-116: Steckverbinder für gedruckte Schaltungen - Bauartspezifikation für einen indirekten High-Speed-Steckverbinder mit integrierter Schirmungsfunktion

Connecteurs pour équipements électroniques - Exigences de produit - Partie 4-116: Connecteurs pour cartes imprimées - Spécification particulière pour un connecteur haute vitesse en deux parties avec une fonction de protection intégrée

La CEI 61076-4-116:2012 établit des spécifications et des exigences d'essai pour un connecteur haute vitesse en deux parties avec une fonction de protection intégrée destiné à être utilisé comme un connecteur de carte imprimée dans des environnements industriels. Les connecteurs raccordent un fond de panier à des cartes imprimées. Mots clé: connecteur, connecteur de carte imprimée.

Konektorji za elektronsko opremo - Zahteve za izdelek - 4-116. del: Konektorji za tiskana vezja - Podrobna specifikacija za visokohitrostni dvodelni konektor z vgrajeno zaslonsko zaščitno funkcijo

Ta mednarodni standard določa specifikacije in preskusne zahteve za visokohitrostni dvodelni konektor z vgrajeno zaslonsko zaščitno funkcijo, namenjen za uporabo kot konektor za tiskana vezja v industrijskem okolju. Konektorji povezujejo osnovno ploščo s tiskanimi vezji.

General Information

• Status: Published
• Publication Date: 21-Jun-2012
• Withdrawal Date: 23-May-2015
• ICS: 31.220.10 - Plug-and-socket devices. Connectors
• Technical Committee: CLC/SR 48B - Connectors
• Drafting Committee: IEC/SC 48B - IEC_SC_48B
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 22-Jun-2012
• Completion Date: 22-Jun-2012
• Ref Project: SIST EN 61076-4-116:2012 - Connectors for electronic equipment - Product requirements - Part 4-116: Printed board connectors - Detail specification for a high-speed two-part connector with integrated shielding function

Standards Content (Sample)

SLOVENSKI STANDARD
01-september-2012
.RQHNWRUML]DHOHNWURQVNRRSUHPR=DKWHYH]DL]GHOHNGHO.RQHNWRUML]D
WLVNDQDYH]MD3RGUREQDVSHFLILNDFLMD]DYLVRNRKLWURVWQLGYRGHOQLNRQHNWRU]
YJUDMHQR]DVORQVNR]DãþLWQRIXQNFLMR
Connectors for electronic equipment - Product requirements - Part 4-116: Printed board
connectors - Detail specification for a high-speed two-part connector with integrated
shielding function
Steckverbinder für elektronische Einrichtungen - Produktanforderungen - Teil 4-116:
Steckverbinder für gedruckte Schaltungen - Bauartspezifikation für einen indirekten High-
Speed-Steckverbinder mit integrierter Schirmungsfunktion
Connecteurs pour équipements électroniques - Exigences de produit - Partie 4-116:
Connecteurs pour cartes imprimées - Spécification particulière pour un connecteur haute
vitesse en deux parties avec une fonction de protection intégrée
Ta slovenski standard je istoveten z: EN 61076-4-116:2012
ICS:
31.180 7LVNDQDYH]MD7,9LQWLVNDQH Printed circuits and boards
SORãþH
31.220.10 9WLþLLQYWLþQLFHNRQHNWRUML Plug-and-socket devices.
Connectors
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 61076-4-116
NORME EUROPÉENNE
June 2012
EUROPÄISCHE NORM
ICS 31.220.10
English version
Connectors for electronic equipment -
Product requirements -
Part 4-116: Printed board connectors -
Detail specification for a high-speed two-part connector
with integrated shielding function
(IEC 61076-4-116:2012)
Connecteurs pour équipements Steckverbinder für elektronische
électroniques - Exigences de produit - Einrichtungen - Produktanforderungen -
Partie 4-116: Connecteurs pour cartes Teil 4-116: Steckverbinder für gedruckte
imprimées - Schaltungen -
Spécification particulière pour un Bauartspezifikation für einen indirekten
connecteur haute vitesse en deux parties High-Speed-Steckverbinder mit
avec une fonction de protection intégrée integrierter Schirmungsfunktion
(CEI 61076-4-116:2012) (IEC 61076-4-116:2012)

This European Standard was approved by CENELEC on 2012-05-24. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels

© 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61076-4-116:2012 E

Foreword
The text of document 48B/2280/FDIS, future edition 1 of IEC 61076-4-116, prepared by SC 48B
“Connectors” of IEC/TC 48 "Electromechanical components and mechanical structures for electronic
equipment" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN
61076-4-116:2012.
The following dates are fixed:
(dop) 2013-02-24
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2015-05-24
standards conflicting with the
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 61076-4-116:2012 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated :

IEC 60664-1 NOTE Harmonised as EN 60664-1.

- 3 - EN 61076-4-116:2012
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
IEC 60050-581 2008 International Electrotechnical Vocabulary - -
(IEV) -
Part 581: Electromechanical components for
electronic equipment
IEC 60068-1 - Environmental testing - EN 60068-1 -
Part 1: General and guidance
IEC 60068-2-52 1996 Environmental testing - EN 60068-2-52 1996
+ corr. July 1996 Part 2-52: Tests - Test Kb: Salt mist, cyclic
(sodium chloride solution)
IEC 60068-2-54 2006 Environmental testing - EN 60068-2-54 2006
Part 2-54: Tests - Test Ta: Solderability
testing of electronic components by the
wetting balance method
IEC 60352-5 - Solderless connections - EN 60352-5 -
Part 5: Press-in connections - General
requirements, test methods and practical
guidance
IEC 60352-8 - Solderless connections - EN 60352-8 -
Part 8: Compression mount connections -
General requirements, test methods and
practical guidance
IEC 60512 Series Connectors for electronic equipment - Tests EN 60512 Series
and measurements
IEC 61076-4-116 ®
Edition 1.0 2012-04
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Connectors for electronic equipment – Product requirements –

Part 4-116: Printed board connectors – Detail specification for a high-speed

two-part connector with integrated shielding function

Connecteurs pour équipements électroniques – Exigences de produit –

Partie 4-116: Connecteurs pour cartes imprimées – Spécification particulière

pour un connecteur haute vitesse en deux parties avec une fonction de

protection intégrée
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
X
CODE PRIX
ICS 31.220.10 ISBN 978-2-8322-0059-9

– 2 – 61076-4-116 © IEC:2012
CONTENTS
FOREWORD . 5
INTRODUCTION . 8
1 Scope . 10
2 Normative references . 10
3 Terms and definitions . 10
4 General data . 11
4.1 Recommended method of mounting . 11
4.2 Number of contacts and contact cavities . 11
4.3 Ratings and characteristics . 12
5 Technical data . 12
5.1 Survey of styles and variants . 12
5.2 Information on application . 12
5.2.1 Complete connectors (pairs) . 12
5.2.2 Fixed board connectors . 12
5.2.3 Free board connectors . 12
5.2.4 Accessories . 12
5.2.5 Shielding and grounding . 12
5.2.6 Basic type of termination . 12
5.3 Contact arrangement . 13
6 Dimensional information . 13
6.1 General . 13
6.2 Isometric view and common features . 14
6.2.1 Common features . 14
6.2.2 Reference system . 14
6.3 Mating information . 14
6.3.1 Mating conditions . 14
6.3.2 Planarity . 15
6.4 Fixed board connector . 16
6.4.1 Dimensions . 16
6.4.2 Terminations . 17
6.5 Free board connector . 18
6.5.1 Dimensions . 18
6.5.2 Terminations . 20
6.6 Accessories . 21
6.7 Mounting information for fixed board connectors . 21
6.8 Mounting information for connectors . 22
6.9 Gauges . 22
6.9.1 Sizing gauges and retention force gauges . 22
6.9.2 Test gauge for first contact point . 22
7 Characteristics . 22
7.1 Climatical category . 22
7.2 Electrical characteristics . 23
7.2.1 Creepage and clearance distances . 23
7.2.2 Voltage proof . 23
7.2.3 Current-carrying capacity. 23

61076-4-116 © IEC:2012 – 3 –
7.2.4 Contact resistance . 23
7.2.5 Insulation resistance . 24
7.2.6 Impedance. 24
7.2.7 Transmission characteristics. 24
7.3 Mechanical characteristics . 26
7.3.1 Mechanical operation . 26
7.3.2 Engaging and withdrawal forces . 26
7.3.3 Contact retention in insert . 27
7.3.4 Static load, transverse . 27
7.3.5 Gauge retention force . 27
7.3.6 Vibration (sinusodial) . 27
...