EN IEC 61754-7-2:2018
(Main)Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 7-2: Type MPO connector family - Two fibre rows
Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 7-2: Type MPO connector family - Two fibre rows
IEC 61754-7-2:2017(E) defines the standard interface dimensions for the type MPO family of connectors with two rows of fibres. This first edition of IEC 61754-7-2, along with the first edition of IEC 61754-7-1, cancels and replaces the third edition of IEC 61754-7 published in 2008. This first edition of IEC 61754-7-2 includes the two fibre row MPO variants including the addition of active device receptacles and up-angled plugs. The first edition of IEC 61754-7-1 includes the one fibre row MPO variants and related active device receptacles and up-angled plugs. Keywords: interface dimensions for the type MPO family of connectors with two rows of fibres
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Steckgesichter von Lichtwellenleiter-Steckverbindern - Teil 7-2: Steckverbinderfamilie der Bauart MPO - Zwei Faserreihen
Dispositifs d’interconnexion et composants passifs fibroniques - Interfaces de connecteurs fibroniques - Partie 7-2: Famille de connecteurs de type MPO - Deux rangées de fibres
IEC 61754-7-2: 2017 définit les dimensions d’interface normalisées pour la famille de connecteurs de type MPO comportant deux rangées de fibres. Cette première édition de l'IEC 61754-7-2, ainsi que la première édition de l'IEC 61754-7-1, annulent et remplacent la troisième édition de l'IEC 61754-7 publiée en 2008. Cette première édition de l'IEC 61754-7-2 contient les variantes MPO à deux rangées de fibres y compris l'ajout d'embases de dispositif actif et de fiches à angle orienté vers le haut. La première édition de l'IEC 61754-7-1 contient les variantes MPO à une rangée de fibres, ainsi que les embases de dispositif actif et les fiches à angle orienté vers le haut associées.
Optični spojni elementi in pasivne komponente - Vmesniki optičnih konektorjev - 7-2. del: Konektorska družina, tip MPO - Vlakna dvoredno (IEC 61754-7-2:2017)
Ta del standarda IEC 61754 opredeljuje standardne mere vmesnikov za družino konektorjev vrste MPO z dvorednimi vlakni.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-maj-2018
1DGRPHãþD
SIST EN 61754-7:2008
2SWLþQLVSRMQLHOHPHQWLLQSDVLYQHNRPSRQHQWH9PHVQLNLRSWLþQLKNRQHNWRUMHY
GHO .RQHNWRUVNDGUXåLQDWLS0329ODNQDGYRUHGQR ,(&
Fibre optic interconnecting devices and passive components - Fibre optic connector
interfaces - Part 7-2: Type MPO connector family - Two fibre rows (IEC 61754-7-2:2017)
Ta slovenski standard je istoveten z: EN IEC 61754-7-2:2018
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN IEC 61754-7-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2018
ICS 33.180.20 Supersedes EN 61754-7:2008 (partially)
English Version
Fibre optic interconnecting devices and passive components -
Fibre optic connector interfaces - Part 7-2: Type MPO connector
family - Two fibre rows
(IEC 61754-7-2:2017)
Dispositifs d'interconnexion et composants passifs Steckgesichter von Lichtwellenleiter-Steckverbindern - Teil
fibroniques - Interfaces de connecteurs fibroniques - Partie 7-2: Steckverbinderfamilie der Bauart MPO - Zwei
7-2: Famille de connecteurs de type MPO - Deux rangées Faserreihen
de fibres (IEC 61754-7-2:2017)
(IEC 61754-7-2:2017)
This European Standard was approved by CENELEC on 2018-01-17. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 61754-7-2:2018 E
European foreword
The text of document (86B/4099/FDIS), future edition 1 of IEC 61754-7-2, prepared by IEC/SC 86B:
“Fibre optic interconnecting devices and passive components”, of IEC/TC 86: “Fibre optics”, was
submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN IEC 61754-7-2:2018.
The following dates are fixed:
• latest date by which the document has to be (dop) 2018-10-17
implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2019-01-17
• latest date by which the national
standards conflicting with the
document have to be withdrawn
This document partially supersedes EN 61754-7:2008.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 61754-7-2:2017 was approved by CENELEC as a
European Standard without any modification.
IEC 61754-7-2 ®
Edition 1.0 2017-12
INTERNATIONAL
STANDARD
Fibre optic interconnecting devices and passive components – Fibre optic
connector interfaces –
Part 7-2: Type MPO connector family – Two fibre rows
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 33.180.20 ISBN 978-2-8322-5066-2
– 2 – IEC 61754-7-2:2017 © IEC 2017
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Description . 6
5 Interfaces . 7
Figure 1 – MPO connector configurations . 8
Figure 2 – MPO female plug, down-angled interface . 8
Figure 3 – MPO female plug, up-angled interface . 9
Figure 4 – Optical datum target location diagrams . 12
Figure 5 – Gauge pin . 13
Figure 6 – Gauge for plug . 13
Figure 7 – MPO male plug, down-angled interface . 14
Figure 8 – MPO male plug, up-angled interface . 15
Figure 9 – MPO adaptor interface, opposed keyway configuration . 18
Figure 10 – MPO female plug, flat interface . 20
Figure 11 – MPO male plug, flat interface . 22
Figure 12 – MPO backplane housing interface (1 of 2) . 24
Figure 13 – MPO printed board housing interface (1 of 2) . 28
Figure 14 – MPO adaptor interface, aligned keyway configuration . 31
Figure 15 – MPO active device receptacle, angled interface . 33
Figure 16 – MPO active device receptacle, flat interface . 35
Table 1 – Intermateability between plugs and adapters/housings/receptacles . 7
Table 2 – Dimensions of the MPO female plug, down or up-angled interface . 10
Table 3 – Dimensions of the gauge pin . 13
Table 4 – Dimensions of the gauge for plug . 14
Table 5 – Dimensions of the MPO male plug, down- or up-angled interface . 16
Table 6 – Dimensions of the MPO adaptor interface, opposed keyway configuration . 19
Table 7 – Dimensions of the MPO female plug, flat interface . 21
Table 8 – Dimensions of the MPO male plug, flat interface . 23
Table 9 – Dimensions of the MPO backplane housing . 26
Table 10 – Grade . 27
Table 11 – Dimensions of the MPO printed board housing interface . 30
Table 12 – Dimensions of the MPO adaptor interface, aligned keyway configuration . 32
Table 13 – Dimensions of the MPO active device receptacle, angled interface . 34
Table 14 – Dimensions of the MPO active device receptacle, flat interface . 36
IEC 61754-7-2:2017 © IEC 2017 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FIBRE OPTIC INTERCONNECTING
DEVICES AND PASSIVE COMPONENTS –
FIBRE OPTIC CONNECTOR INTERFACES –
Part 7-2: Type MPO connector family –
Two fibre rows
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 61754-7-2 has been prepared by subcommittee 86B: Fibre optic
interconnecting devices and passive components, of IEC technical committee 86: Fibre optics.
This first edition of IEC 61754-7-2, along with the first edition of IEC 61754-7-1, cancels and
replaces the third edition of IEC 61754-7 published in 2008.
This first edition of IEC 61754-7-2 includes the two fibre row MPO variants including the
addition of active device receptacles and up-angled plugs.
The first edition of IEC 61754-7-1 includes the one fibre row MPO variants and related active
device receptacles and up-angled plugs.
– 4 – IEC 61754-7-2:2017 © IEC 2017
Following the publication of both IEC 61754-7-1 and IEC 61754-7-2, IEC 61754-7 will be
withdrawn.
The text of this International Standard is based on the following documents:
FDIS Report on voting
86B/4099/FDIS 86B/4110/RVD
Full information on the voting for the approval of this International Standard can be found in
the report on voting indicated in the above table.
This document has been drafted in accordance with the ISO/IEC Directives, Part 2.
A list of all the parts in the IEC 61754 series, published under the general title Fibre optic
interconnecting devices and passive components – Fibre optic connector interfaces, can be
found on the IEC website.
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under "http://webstore.iec.ch" in the data related to
the specific document. At this date, the document will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
A bilingual version of this publication may be issued at a later date.
SIST EN IEC 61
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.