EN 60255-1:2010
(Main)Measuring relays and protection equipment - Part 1: Common requirements
Measuring relays and protection equipment - Part 1: Common requirements
IEC 60255-1:2009 specifies common rules and requirements applicable to measuring relays and protection equipment including any combination of devices to form schemes for power system protection such as control, monitoring and process interface equipment in order to obtain uniformity of requirements and tests. Covers all measuring relays and protection equipment used for protection within the power system environment.
Messrelais und Schutzeinrichtungen - Teil 1: Allgemeine Anforderungen
Relais de mesure et dispositifs de protection - Partie 1: Prescriptions communes
La CEI 60255-1:2009 spécifie les exigences et les règles communes applicables aux relais de mesure et dispositifs de protection, y compris toute combinaison de dispositifs pour former des systèmes pour la protection de réseaux d'alimentation, tels que des dispositifs de commande, de surveillance et d'interface processus dans le but d'obtenir l'uniformité des exigences et des essais. Couvre tous les relais de mesure et dispositifs de protection utilisés pour la protection dans l'environnement du réseau d'alimentation.
Merilni releji in zaščitna oprema - 1. del: Skupne zahteve
Ta del IEC 60255 določa skupna pravila in zahteve, ki se uporabljajo za merilne releje in zaščitno opremo, vključno s kakršnokoli kombinacijo naprav, ki tvorijo sheme za zaščito napajalnih sistemov, kot je oprema za nadzor, spremljanje in vmesniška procesna oprema, z namenom zagotoviti enotnost zahtev in preskusov. V tem standardu so zajeti vsi merilni releji in zaščitna oprema, ki se uporabljajo za zaščito znotraj okolja napajalnih sistemov. Drugi standardi v tej seriji lahko določajo svoje zahteve, ki imajo v takih primerih prednost. Za posebna področja uporabe (pomorska uporaba, aeronavtika, eksplozivne atmosfere, računalniki itd.) je splošne zahteve v okviru tega standarda morda potrebno okrepiti z dodatnimi posebnimi zahtevami. Te zahteve veljajo samo za nove releje. Vsi preskusi v tem standardu so tipski preskusi, razen če je navedeno drugače.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-december-2010
1DGRPHãþD
SIST EN 60255-6:2001
0HULOQLUHOHMLLQ]DãþLWQDRSUHPDGHO 6NXSQH]DKWHYH
Measuring relays and protection equipment - Part 1: Common requirements
Messrelais und Schutzeinrichtungen - Teil 1: Allgemeine Anforderungen
Relais de mesure et dispositifs de protection - Partie 1: Prescriptions communes
Ta slovenski standard je istoveten z: EN 60255-1:2010
ICS:
29.120.70 Releji Relays
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 60255-1
NORME EUROPÉENNE
January 2010
EUROPÄISCHE NORM
ICS 29.120.70 Supersedes EN 60255-6:1994 + corr. Feb.1995
English version
Measuring relays and protection equipment -
Part 1: Common requirements
(IEC 60255-1:2009)
Relais de mesure et dispositifs Messrelais und Schutzeinrichtungen -
de protection - Teil 1: Allgemeine Anforderungen
Partie 1: Prescriptions communes (IEC 60255-1:2009)
(CEI 60255-1:2009)
This European Standard was approved by CENELEC on 2009-12-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: Avenue Marnix 17, B - 1000 Brussels
© 2010 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60255-1:2010 E
Foreword
The text of document 95/252/FDIS, future edition 1 of IEC 60255-1, prepared by IEC TC 95, Measuring
relays and protection equipment, was submitted to the IEC-CENELEC parallel vote and was approved by
CENELEC as EN 60255-1 on 2009-12-01.
This European Standard supersedes EN 60255-6:1994.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent
rights.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2010-09-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2012-12-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60255-1:2009 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 61508 NOTE Harmonized in EN 61508 series (not modified).
IEC 60255-5 NOTE Harmonized as EN 60255-5:2001 (not modified).
IEC 60300-1 NOTE Harmonized as EN 60300-1
__________
- 3 - EN 60255-1:2010
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
IEC 60044-1 (mod) 1996 Instrument transformers - EN 60044-1 1999
Part 1: Current transformers
IEC 60044-2 (mod) 1997 Instrument transformers - EN 60044-2 1999
Part 2: Inductive voltage transformers
IEC 60044-5 2004 Instrument transformers - EN 60044-5 2004
Part 5: Capacitor voltage transformers
IEC 60044-7 1999 Instrument transformers - EN 60044-7 2000
Part 7: Electronic voltage transformers
IEC 60044-8 2002 Instrument transformers - EN 60044-8 2002
Part 8: Electronic current transformers
IEC 60050-191 1990 International Electrotechnical Vocabulary - -
(IEV) -
Chapter 191: Dependability and quality of
service
IEC 60050-447 2009 International Electrotechnical Vocabulary - - -
Part 447: Measuring relays
IEC 60068-2-1 2007 Environmental testing - EN 60068-2-1 2007
Part 2-1: Tests - Test A: Cold
IEC 60068-2-2 2007 Environmental testing - EN 60068-2-2 2007
Part 2-2: Tests - Test B: Dry heat
IEC 60068-2-14 2009 Environmental testing - EN 60068-2-14 2009
Part 2-14: Tests - Test N: Change of
temperature
IEC 60068-2-30 2005 Environmental testing - EN 60068-2-30 2005
Part 2-30: Tests - Test Db: Damp heat, cyclic
(12 h + 12 h cycle)
IEC 60068-2-78 2001 Environmental testing - EN 60068-2-78 2001
Part 2-78: Tests - Test Cab: Damp heat,
steady state
IEC 60068-3-4 2001 Environmental testing - EN 60068-3-4 2002
Part 3-4: Supporting documentation and
guidance - Damp heat tests
IEC 60255-11 2008 Measuring relays and protection equipment - EN 60255-11 2010
Part 11: Voltage dips, short interruptions,
variations and ripple on auxiliary power supply
port
Publication Year Title EN/HD Year
IEC 60255-21-1 1988 Electrical relays - EN 60255-21-1 1995
Part 21: Vibration, shock, bump and seismic
tests on measuring relays and protection
equipment - Section 1: Vibration tests
(sinusoidal)
IEC 60255-21-2 1988 Electrical relays - EN 60255-21-2 1995
Part 21: Vibration, shock, bump and seismic
tests on measuring relays and protection
equipment - Section 2: Shock and bump tests
IEC 60255-21-3 1993 Electrical relays - EN 60255-21-3 1995
Part 21: Vibration, shock, bump and seismic
tests on measuring relays and protection
equipment - Section 3: Seismic tests
IEC 60255-22-2 2008 Measuring relays and protection equipment - EN 60255-22-2 2008
Part 22-2: Electrical disturbance tests -
Electrostatic discharge tests
IEC 60255-22-4 2008 Measuring relays and protection equipment - EN 60255-22-4 2008
Part 22-4: Electrical disturbance tests -
Electrical fast transient/burst immunity test
1)
IEC 60255-22-5 2008 Measuring relays and protection equipment - EN 60255-22-5 200X
Part 22-5: Electrical disturbance tests - Surge
immunity test
IEC 60255-22-7 2003 Electrical relays - EN 60255-22-7 2003
Part 22-7: Electrical disturbance tests for
measuring relays and protection equipment -
Power frequency immunity tests
IEC 60255-25 2000 Electrical relays - EN 60255-25 2000
Part 25: Electromagnetic emission tests for
measuring relays and protection equipment
IEC 60255-26 2008 Measuring relays and protection equipment - EN 60255-26 2009
Part 26: Electromagnetic compatibility
requirements
IEC 60255-27 2005 Measuring relays and protection equipment - EN 60255-27 2005
Part 27: Product safety requirements
IEC 60255-1xx Series Measuring relays and protection equipment - EN 60255-1xx Series
Part 1xx: Protection functional standards
IEC 60297-3-101 2004 Mechanical structures for electronic EN 60297-3-101 2004
equipment - Dimensions of mechanical
structures of the 482,6 mm (19 in) series -
Part 3-101: Subracks and associated plug-in
units
IEC 60529 1989 Degrees of protection provided EN 60529 1991
by enclosures (IP Code) + corr. May 1993
IEC 60688 - Electrical measuring transducers for EN 60688 -
converting a.c. electrical quantities to
analogue or digital signals
1)
To be ratified.
- 5 - EN 60255-1:2010
Publication Year Title EN/HD Year
IEC 60721-3-3 - Classification of environmental conditions - EN 60721-3-3 -
Part 3: Classification of groups of
environmental parameters and
their severities -
Section 3: Stationary use at weatherprotected
locations
IEC/TS 61000-2-5 1995 Electromagnetic compatibility (EMC) - - -
Part 2-5: Environment - Classification of
electromagnetic environments - Basic EMC
publication
IEC 61810 - Electromechanical elementary relays - EN 61810 -
Part 1: General requirements
IEC 61810-2 - Electromechanical elementary relays - EN 61810-2 -
Part 2: Reliability
IEC 61850 Series Communication networks and systems in EN 61850 Series
substations
IEC 61850-9-2 - Communication networks and systems in EN 61850-9-2 -
substations -
Part 9-2: Specific Communication Service
Mapping (SCSM) - Sampled values over
ISO/IEC 8802-3
IEC 60255-1 ®
Edition 1.0 2009-08
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Measuring relays and protection equipment –
Part 1: Common requirements
Relais de mesure et dispositifs de protection –
Partie 1: Exigences communes
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
X
CODE PRIX
ICS 29.120.70 ISBN 978-2-88910-074-3
– 2 – 60255-1 © IEC:2009
CONTENTS
FOREWORD.5
INTRODUCTION.7
1 Scope.9
2 Normative references .9
3 Terms and definitions .11
4 Environmental conditions.13
4.1 General .13
4.2 Normal environmental conditions.13
4.3 Special environmental conditions .14
4.4 Storage conditions .15
5 Ratings.15
5.1 General .15
5.2 Rated voltage.15
5.2.1 Input energizing voltage .15
5.2.2 Auxiliary energizing voltage .16
5.2.3 Rated insulation voltage .16
5.3 Rated current .16
5.3.1 Input energizing current.16
5.3.2 Auxiliary energizing current .17
5.4 Binary input and output .17
5.4.1 Binary input .17
5.4.2 Binary output .17
5.5 Transducer analogue input and output.17
5.5.1 Transducer analogue input .17
5.5.2 Transducer analogue output .17
5.6 Frequency .17
5.6.1 Rated frequency .17
5.6.2 Frequency operating range.17
5.7 Rated burden .17
5.8 Rated ambient temperature .17
6 Design and construction .18
6.1 Marking .18
6.2 Dimensions .18
6.3 Enclosure protection.18
6.4 Product safety requirements.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.