EN 60255-1:2010

Measuring relays and protection equipment - Part 1: Common requirements

IEC 60255-1:2009 specifies common rules and requirements applicable to measuring relays and protection equipment including any combination of devices to form schemes for power system protection such as control, monitoring and process interface equipment in order to obtain uniformity of requirements and tests. Covers all measuring relays and protection equipment used for protection within the power system environment.

Messrelais und Schutzeinrichtungen - Teil 1: Allgemeine Anforderungen

Relais de mesure et dispositifs de protection - Partie 1: Prescriptions communes

La CEI 60255-1:2009 spécifie les exigences et les règles communes applicables aux relais de mesure et dispositifs de protection, y compris toute combinaison de dispositifs pour former des systèmes pour la protection de réseaux d'alimentation, tels que des dispositifs de commande, de surveillance et d'interface processus dans le but d'obtenir l'uniformité des exigences et des essais. Couvre tous les relais de mesure et dispositifs de protection utilisés pour la protection dans l'environnement du réseau d'alimentation.

Merilni releji in zaščitna oprema - 1. del: Skupne zahteve

Ta del IEC 60255 določa skupna pravila in zahteve, ki se uporabljajo za merilne releje in zaščitno opremo, vključno s kakršnokoli kombinacijo naprav, ki tvorijo sheme za zaščito napajalnih sistemov, kot je oprema za nadzor, spremljanje in vmesniška procesna oprema, z namenom zagotoviti enotnost zahtev in preskusov. V tem standardu so zajeti vsi merilni releji in zaščitna oprema, ki se uporabljajo za zaščito znotraj okolja napajalnih sistemov. Drugi standardi v tej seriji lahko določajo svoje zahteve, ki imajo v takih primerih prednost. Za posebna področja uporabe (pomorska uporaba, aeronavtika, eksplozivne atmosfere, računalniki itd.) je splošne zahteve v okviru tega standarda morda potrebno okrepiti z dodatnimi posebnimi zahtevami. Te zahteve veljajo samo za nove releje. Vsi preskusi v tem standardu so tipski preskusi, razen če je navedeno drugače.

General Information

• Status: Published
• Publication Date: 21-Jan-2010
• Withdrawal Date: 30-Nov-2012
• ICS: 29.120.70 - Relays
• Technical Committee: CLC/TC 95X - Measuring relays and protection equipment
• Drafting Committee: IEC/TC 95 - IEC_TC_95
• Parallel Committee: IEC/TC 95 - IEC_TC_95
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 22-Jan-2010
• Completion Date: 22-Jan-2010
• Ref Project: SIST EN 60255-1:2010 - Measuring relays and protection equipment - Part 1: Common requirements

Relations

• Replaces: EN 60255-6:1994 - Electrical relays - Part 6: Measuring relays and protection equipment
• Effective Date: 28-Jan-2023
• Replaced By: EN IEC 60255-1:2023 - Measuring relays and protection equipment - Part 1: Common requirements
• Effective Date: 24-Jan-2017

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60255-1:2010
01-december-2010
1DGRPHãþD
SIST EN 60255-6:2001
0HULOQLUHOHMLLQ]DãþLWQDRSUHPDGHO6NXSQH]DKWHYH
Measuring relays and protection equipment - Part 1: Common requirements
Messrelais und Schutzeinrichtungen - Teil 1: Allgemeine Anforderungen
Relais de mesure et dispositifs de protection - Partie 1: Prescriptions communes
Ta slovenski standard je istoveten z: EN 60255-1:2010
ICS:
29.120.70 Releji Relays
SIST EN 60255-1:2010 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60255-1:2010

---------------------- Page: 2 ----------------------

SIST EN 60255-1:2010

EUROPEAN STANDARD
EN 60255-1

NORME EUROPÉENNE
January 2010
EUROPÄISCHE NORM

ICS 29.120.70 Supersedes EN 60255-6:1994 + corr. Feb.1995


English version


Measuring relays and protection equipment -
Part 1: Common requirements
(IEC 60255-1:2009)


Relais de mesure et dispositifs  Messrelais und Schutzeinrichtungen -
de protection - Teil 1: Allgemeine Anforderungen
Partie 1: Prescriptions communes (IEC 60255-1:2009)
(CEI 60255-1:2009)




This European Standard was approved by CENELEC on 2009-12-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: Avenue Marnix 17, B - 1000 Brussels


© 2010 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60255-1:2010 E

---------------------- Page: 3 ----------------------

SIST EN 60255-1:2010
EN 60255-1:2010 - 2 -
Foreword
The text of document 95/252/FDIS, future edition 1 of IEC 60255-1, prepared by IEC TC 95, Measuring
relays and protection equipment, was submitted to the IEC-CENELEC parallel vote and was approved by
CENELEC as EN 60255-1 on 2009-12-01.
This European Standard supersedes EN 60255-6:1994.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent
rights.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2010-09-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2012-12-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60255-1:2009 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 61508 NOTE  Harmonized in EN 61508 series (not modified).
IEC 60255-5 NOTE  Harmonized as EN 60255-5:2001 (not modified).
IEC 60300-1 NOTE  Harmonized as EN 60300-1
__________

---------------------- Page: 4 ----------------------

SIST EN 60255-1:2010
- 3 - EN 60255-1:2010

Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.

Publication Year Title EN/HD Year

IEC 60044-1 (mod) 1996 Instrument transformers - EN 60044-1 1999
Part 1: Current transformers


IEC 60044-2 (mod) 1997 Instrument transformers - EN 60044-2 1999
Part 2: Inducti
...