EN 61499-4:2013

Function blocks - Part 4: Rules for compliance profiles

IEC 61499-4:2013 defines rules for the development of compliance profiles, which specify the features of IEC 61499-1 and 61499-2 to be implemented in order to promote the following attributes of IEC 61499-based systems, devices and software tools: - interoperability of devices from multiple suppliers; - portability of software between software tools of multiple suppliers; - and configurability of devices from multiple vendors by software tools of multiple suppliers. This second edition cancels and replaces the first edition published in 2005. It constitutes a technical revision and includes the following significant technical changes: Table B.1 has been updated for consistency with Table 8 of IEC 61499-1:2013.

Verteilte Funktionsbausteine für die Automatisierungstechnik - Teil 4: Regeln für normgerechte Profile

Blocs fonctionnels - Partie 4: Règles pour les profils de conformité

La CEI 61499-4:2013 définit des règles pour le développement de profils de conformité, qui spécifient les caractéristiques de la CEI 61499-1 et de la CEI 61499-2 à mettre en uvre pour promouvoir les attributs suivants des systèmes, dispositifs et outils logiciels basés sur la CEI 61499: - interopérabilité des dispositifs provenant de plusieurs fournisseurs; - portabilité de logiciel entre outils logiciels de plusieurs fournisseurs; - et configurabilité de dispositifs provenant de plusieurs vendeurs par des outils logiciels de plusieurs fournisseurs. Cette deuxième édition annule et remplace la première édition parue en 2005. Elle édition constitue une révision technique et inclut les modifications techniques majeures suivantes: Le Tableau B.1 a été mis à jour pour la cohérence avec le Tableau 8 de la CEI 61499-1:2013.

Funkcijski bloki - 4. del: Pravila za ustreznostne profile (IEC 61499-4:2013)

Ta del standarda IEC 61499 določa pravila za razvoj ustreznostnih profilov, ki določajo značilnosti standardov IEC 61499-1 in 61499-2, ki jih je treba vključiti, da se spodbuja naslednje lastnosti sistemov, naprav in orodij programske opreme, ki temeljijo na standardu IEC 61499:
• interoperabilnost naprav različnih dobaviteljev;
• prenosljivost programske opreme med orodji programske opreme različnih dobaviteljev in
• konfigurativnost naprav različnih prodajalcev z orodji programske opreme različnih dobaviteljev.
OPOMBA 1: Povezovalna člena #1 in #2 senzorja/sprožila na sliki 1 sta lahko interoperabilna ali pa ne. Vendar pa naj bi sistemi, skladni z določenim profilom, prikazovali prenos dogodkov in podatkov od senzorja na enem povezovalnem členu do sprožilnikov na drugem prek ustrezno konfiguriranih in medsebojno povezanih funkcijskih blokov storitvenih vmesnikov.
OPOMBA 2: Ustreznostni profili imajo lahko širše področje uporabe, kot prikazuje slika 1, za vključitev interoperabilnosti senzorjev in sprožilnikov.
OPOMBA 3: Dobavitelji orodij programske opreme zagotavljajo, da so njihovi izdelki skladni z zahtevami standarda IEC 61499-2 ter drugimi določenimi zahtevami, opredeljenimi za ustreznostne profile, ki veljajo za njihovo določeno orodje programske opreme.

General Information

• Status: Published
• Publication Date: 02-May-2013
• Withdrawal Date: 05-Mar-2016
• ICS: 25.040.40 - Industrial process measurement and control
• Technical Committee: CLC/TC 65X - Industrial-process measurement, control and automation
• Drafting Committee: IEC/SC 65B - IEC_SC_65B
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 03-May-2013
• Completion Date: 03-May-2013
• Ref Project: SIST EN 61499-4:2013 - Function blocks - Part 4: Rules for compliance profiles (IEC 61499-4:2013)

Relations

• Replaces: EN 61499-4:2006 - Function blocks - Part 4: Rules for compliance profiles
• Effective Date: 29-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61499-4:2013
01-julij-2013
1DGRPHãþD
SIST EN 61499-4:2006
Funkcijski bloki - 4. del: Pravila za ustreznostne profile (IEC 61499-4:2013)
Function blocks - Part 4: Rules for compliance profiles (IEC 61499-4:2013)
Verteilte Funktionsbausteine für die Automatisierungstechnik - Teil 4: Regeln für
normgerechte Profile (IEC 61499-4:2013)
Blocs fonctionnels - Partie 4: Règles pour les profils de conformité (CEI 61499-4:2013)
Ta slovenski standard je istoveten z: EN 61499-4:2013
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
SIST EN 61499-4:2013 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61499-4:2013

---------------------- Page: 2 ----------------------

SIST EN 61499-4:2013

EUROPEAN STANDARD
EN 61499-4

NORME EUROPÉENNE
May 2013
EUROPÄISCHE NORM

ICS 25.040.40 Supersedes EN 61499-4:2006


English version


Function blocks -
Part 4: Rules for compliance profiles
(IEC 61499-4:2013)


Blocs fonctionnels -  Verteilte Funktionsbausteine für die
Partie 4: Règles pour les profils de Automatisierungstechnik -
conformité Teil 4: Regeln für normgerechte Profile
(CEI 61499-4:2013) (IEC 61499-4:2013)





This European Standard was approved by CENELEC on 2013-03-06. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2013 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61499-4:2013 E

---------------------- Page: 3 ----------------------

SIST EN 61499-4:2013
EN 61499-4:2013 - 2 -

Foreword
The text of document 65B/854/FDIS, future edition 2 of IEC 61499-4, prepared by SC 65B, "Measurement
and control devices", of IEC TC 65, "Industrial-process measurement, control and automation" was
submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61499-4:2013.
The following dates are fixed:
• latest date by which the document has (dop) 2013-12-06
to be implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2016-03-06
• latest date by which the national
standards conflicting with the

document have to be withdrawn

This document supersedes EN 61499-4:2006.
EN 61499-4:2013 includes the following significant technical change with respect to EN 61499-4:2006:
Table B.1 has been updated for consistency with Table 8 of EN 61499-1:2013.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent
rights.
Endorsement notice
The text of the International Standard IEC 61499-4:2013 was approved by CENELEC as a European
Standard without any modification.

---------------------- Page: 4 ----------------------

SIST EN 61499-4:2013
- 3 - EN 61499-4:2013
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.

Publication Year Title EN/HD Year

IEC 61499-1 2012 Function blocks - EN 61499-1 20
...