EN IEC 55016-1-1:2019

Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-1: Radio disturbance and immunity measuring apparatus - Measuring apparatus

This part of CISPR 16 specifies the characteristics and performance of equipment for the
measurement of radio disturbance in the frequency range 9 kHz to 18 GHz. In addition,
requirements are provided for specialized equipment for discontinuous disturbance
measurements.
NOTE In accordance with IEC Guide 107, CISPR 16-1-1 is a basic electromagnetic compatibility (EMC) standard
for use by product committees of the IEC. As stated in Guide 107, product committees are responsible for
determining the applicability of a basic EMC standard. CISPR and its subcommittee are prepared to co-operate
with product committees in the evaluation of the value of particular EMC tests for specific products.
The specifications in this document apply to electromagnetic interference (EMI) receivers and
spectrum analyzers. The term “measuring receiver” used in this document refers to both EMI
receivers and spectrum analyzers (see also 3.7). The calibration requirements for measuring
receivers are detailed in Annex J.
Further guidance on the use of spectrum analyzers can be found in Annex B of any one of the
following documents: CISPR 16-2-1:2014, CISPR 16-2-2:2010, or CISPR 16-2-3: 2016.

Anforderungen an Geräte und Einrichtungen sowie Festlegung der Verfahren zur Messung der hochfrequenten Störaussendung (Funkstörungen) und Störfestigkeit - Teil 1-1: Geräte und Einrichtungen zur Messung der hochfrequenten Störaussendung (Funkstörungen) und Störfestigkeit - Messgeräte

Spécification des méthodes et des appareils de mesure des perturbations radioélectriques et de l'immunité aux perturbations radioélectriques - Partie 1-1: Appareils de mesure des perturbations radioélectriques et de l'immunité aux perturbations radioélectriques - Appareils de mesure

Specifikacija merilnih naprav in metod za merjenje radijskih motenj in odpornosti - 1-1. del: Merilne naprave za merjenje radijskih motenj in odpornosti - Merilne naprave

Ta del standarda CISPR 16 določa značilnosti in učinkovitost opreme za merjenje radijskih motenj v frekvenčnem območju od 9 kHz do 18 GHz. Poleg tega so podane zahteve za specializirano opremo za merjenje občasnih motenj.
OPOMBA: V skladu z vodilom IEC 107 je standard CISPR 16-1-1 osnovni standard o elektromagnetni združljivosti (EMC), ki ga uporabljajo tehnični odbori v okviru Mednarodne elektrotehniške komisije (IEC). Kot je navedeno v Vodilu 107, so za ugotavljanje uporabe osnovnega standarda o elektromagnetni združljivosti odgovorni tehnični odbori. Odbor CISPR in njegov pododbor sta pripravljena sodelovati s tehničnimi odbori pri vrednotenju posebnih preskusov elektromagnetne združljivosti za ustrezne izdelke.
Specifikacije v tem dokumentu se uporabljajo za sprejemnike elektromagnetnih motenj (EMI) in analizatorje spektra. V tem dokumentu uporabljeni izraz »merilni sprejemnik« se navezuje na sprejemnike elektromagnetnih motenj in analizatorje spektra (glej tudi točko 3.7). Zahteve za umerjanje merilnih sprejemnikov so podrobno opredeljene v dodatku J.
Dodatna navodila o uporabi analizatorjev spektra so na voljo v dodatku B katerega koli od naslednjih dokumentov: CISPR 16-2-1:2014, CISPR 16-2-2:2010 ali CISPR 16-2-3: 2016.

General Information

• Status: Published
• Publication Date: 11-Jul-2019
• Withdrawal Date: 25-Jun-2022
• ICS: 33.100.10 - Emission
• Technical Committee: CLC/TC 210 - Electromagnetic Compatibility (EMC)
• Drafting Committee: IEC/SC CISPR/A - Merjenje radijskih interferenc in statistične metode
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 12-Jul-2019
• Completion Date: 12-Jul-2019
• Directive: 2014/30/EU - Directive 2014/30/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to electromagnetic compatibility (recast)
• Ref Project: SIST EN IEC 55016-1-1:2019 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-1: Radio disturbance and immunity measuring apparatus - Measuring apparatus

Relations

• Replaces: EN 55016-1-1:2010/A1:2010 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-1: Radio disturbance and immunity measuring apparatus - Measuring apparatus
• Effective Date: 23-Jan-2023
• Replaces: EN 55016-1-1:2010/A2:2014 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-1: Radio disturbance and immunity measuring apparatus - Measuring apparatus
• Effective Date: 23-Jan-2023
• Replaces: EN 55016-1-1:2010 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-1: Radio disturbance and immunity measuring apparatus - Measuring apparatus
• Effective Date: 07-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
01-september-2019
Nadomešča:
SIST EN 55016-1-1:2010
SIST EN 55016-1-1:2010/A1:2010
SIST EN 55016-1-1:2010/A2:2014
Specifikacija merilnih naprav in metod za merjenje radijskih motenj in odpornosti -
1-1. del: Merilne naprave za merjenje radijskih motenj in odpornosti - Merilne
naprave
Specification for radio disturbance and immunity measuring apparatus and methods -
Part 1-1: Radio disturbance and immunity measuring apparatus - Measuring apparatus
Anforderungen an Geräte und Einrichtungen sowie Festlegung der Verfahren zur
Messung der hochfrequenten Störaussendung (Funkstörungen) und Störfestigkeit - Teil
1-1: Geräte und Einrichtungen zur Messung der hochfrequenten Störaussendung
(Funkstörungen) und Störfestigkeit - Messgeräte
Spécifications des méthodes et des appareils de mesure des perturbations
radioélectriques et de l'immunité aux perturbations radioélectriques - Partie 1-1:
Appareils de mesure des perturbations radioélectriques et de l'immunité aux
perturbations radioélectriques - Appareils de mesure
Ta slovenski standard je istoveten z: EN IEC 55016-1-1:2019
ICS:
17.220.20 Merjenje električnih in Measurement of electrical
magnetnih veličin and magnetic quantities
33.100.20 Imunost Immunity
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 55016-1-1

NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2019
ICS 33.100.10 Supersedes EN 55016-1-1:2010 and all of its
amendments and corrigenda (if any)
English Version
Specification for radio disturbance and immunity measuring
apparatus and methods - Part 1-1: Radio disturbance and
immunity measuring apparatus - Measuring apparatus
(CISPR 16-1-1:2019)
Spécification des méthodes et des appareils de mesure des Anforderungen an Geräte und Einrichtungen sowie
perturbations radioélectriques et de l'immunité aux Festlegung der Verfahren zur Messung der hochfrequenten
perturbations radioélectriques - Partie 1-1: Appareils de Störaussendung (Funkstörungen) und Störfestigkeit - Teil 1-
mesure des perturbations radioélectriques et de l'immunité 1: Geräte und Einrichtungen zur Messung der
aux perturbations radioélectriques - Appareils de mesure hochfrequenten Störaussendung (Funkstörungen) und
(CISPR 16-1-1:2019) Störfestigkeit - Messgeräte
(CISPR 16-1-1:2019)
This European Standard was approved by CENELEC on 2019-06-26. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 55016-1-1:2019 E

European foreword
The text of document CIS/A/1290/FDIS, future edition 5 of CISPR 16-1-1, prepared by CISPR SC A "Radio-
interference measurements and statistical methods" of CISPR "International special committee on radio
interference" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
EN IEC 55016‑1-1:2019.
The following dates are fixed:
• latest date by which the document has to be implemented at national level by (dop) 2020-03-26
publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2022-06-26
document have to be withdrawn
This document supersedes EN 55016-1-1:2010 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
This document supports essential requirements of EU Directive(s).
Endorsement notice
The text of the International Standard CISPR 16-1-1:2019 was approved by CENELEC as a European Standard
without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
CISPR 15:2018 NOTE Harmonized as EN 55015:2018 (not modified)
CISPR 25:2016 NOTE Harmonized as EN 55025:2017 (not modified)
CISPR 32:2015 NOTE Harmonized as EN 55032:2015 (not modified)
CISPR 16-2 (series) NOTE Harmonized as EN 55016-2-4 (series)

Under preparation. Stage at the time of publication: FprEN 55015:2018
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content constitutes
requirements of this document. For dated references, only the edition cited applies. For undated references, the
latest edition of the referenced document (including any amendments) applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies.
NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu.

Publication Year Title EN/HD Year
CISPR 11 (mod) 2015 Industrial, scientific and medical EN 55011 2016
equipment - Radio-frequency disturbance
characteristics - Limits and methods of
measurement
+ A1 2016  + A1 2017
+ A2 2019  - -
CISPR 14-1 2016 Electromagnetic compatibility - EN 55014-1 2017
Requirements for household appliances,
electric tools and similar apparatus - Part
1: Emission
CISPR 16-2-1 2014 Specification for radio disturbance and EN 55016-2-1 2014
immunity measuring apparatus and
methods - Part 2-1: Methods of
measurement of disturbances and
immunity - Conducted disturbance
measurements
CISPR 16-2-2 2010 Specification for radio disturbance and EN 55016-2-2 2011
immunity measuring apparatus and
methods - Part 2-2: Methods of
measurement of disturbances and
immunity - Measurement of disturbance
power
CISPR 16-2-3 -  Specification for radio disturbance and EN 55016-2-3 -
immunity measuring apparatus and
methods - Part 2-3: Methods of
measurement of disturbances and
immunity - Radiated disturbance
measurements
CISPR/TR 16-3:2010 2010 Specification for radio disturbance and - -
immunity measuring apparatus and
methods - Part 3: CISPR technical reports
+ A1 2012  - -
+ A2 2015  - -
IEC 60050-161 1990  I nternational Electrotechnical Vocabulary. - -
Chapter 161: Electromagnetic
compatibility
CISPR 16-1-1 ®
Edition 5.0 2019-05
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
INTERNATIONAL SPECIAL COMMITTEE ON RADIO INTERFERENCE

COMITÉ INTERNATIONAL SPÉCIAL DES PERTURBATIONS RADIOÉLECTRIQUES

BASIC EMC PUBLICATION
PUBLICATION FONDAMENTALE EN CEM

Specification for radio disturbance and immunity measuring apparatus and

methods –
Part 1-1: Radio disturbance and immunity measuring apparatus – Measuring

apparatus
Spécifications des méthodes et des appareils de mesure des perturbations

radioélectriques et de l'immunité aux perturbations radioélectriques –

Partie 1-1: Appareils de mesure des perturbations radioélectriques et de

l’immunité aux perturbations radioélectriques – Appareils de mesure

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 33.100.10 ISBN 978-2-8322-6918-3

– 2 – CISPR 16-1-1:2019 © IEC 2019
CONTENTS
FOREWORD . 7
INTRODUCTION . 10
1 Scope . 11
2 Normative references . 11
3 Terms and definitions . 12
4 Fundamental characteristics of a measuring receiver. 16
4.1 General . 16
4.2 Input impedance . 17
4.3 Sine-wave voltage tolerance . 17
4.4 Overall pass-band selectivity . 17
4.5 Bandwidth . 19
4.6 Frequency tuning tolerance . 20
4.7 Intermediate frequency rejection ratio . 20
4.8 Image frequency rejection ratio . 20
4.9 Other spurious responses . 20
4.10 Limitation of intermodulation effects . 21
4.11 Limitations of receiver noise and internally-generated spurious signals . 22
4.11.1 Random noise . 22
4.11.2 Continuous wave . 22
4.12 Limitation of radio-frequency emissions from the measuring receiver . 22
4.12.1 Conducted emissions. 22
4.12.2 Radiated emissions . 22
4.13 Facilities for connection to a discontinuous disturbance analyzer . 23
5 Quasi-peak measuring receivers for the frequency range 9 kHz to 1 000 MHz . 23
5.1 General . 23
5.2 Response to pulses . 23
5.2.1 Amplitude relationship (absolute calibration) . 23
5.2.2 Variation with repetition frequency (relative calibration) . 23
6 Measuring receivers with peak detector for the frequency range 9 kHz to 18 GHz . 27
6.1 General . 27
6.2 Charge and discharge time constants ratio . 27
6.3 Overload factor . 28
6.4 Response to pulses . 28
7 Measuring receivers with average detector for the frequency range 9 kHz to
18 GHz . 28
7.1 General . 28
7.2 Overload factor . 29
7.3 Response to pulses . 29
7.3.1 Amplitude relationship . 29
7.3.2 Variation with repetition frequency . 30
7.3.3 Response to intermittent, unsteady and drifting narrowband
disturbances . 30
8 Measuring receivers with RMS-average detector for the frequency range 9 kHz to
18 GHz . 32
8.1 General .
...