EN 61784-5-11:2013

Industrial communication networks - Profiles - Part 5-11: Installation of fieldbuses - Installation profiles for CPF 11

IEC 61784-5-11:2013 specifies the installation profiles for CPF 11 (TCnet). Each CP installation profile is specified in a separate part of this standard. The IEC 61784 series is produced to facilitate the use of communication networks in industrial control systems. This third edition cancels and replaces the second edition published in 2010 and constitutes a technical revision. It includes the following changes: Addition of a new Annex C (normative). This standard is to be used in conjunction with IEC 61918:2013.

Industrielle Kommunikationsnetze - Profile - Teil 5-11: Feldbusinstallation - Installationsprofile für die Kommunikationsprofilfamilie 11

Réseaux de communication industriels - Profils - Partie 5-11: Installation des bus de terrain - Profils d'installation pour CPF 11

La CEI 61784-5-11:2013 définit les profils d'installation applicables à la CPF 11 (TCnet). Chaque profil d'installation de CP est spécifié dans une partie séparée de la présente série de normes. Cette norme fait partie d'une série élaborée pour faciliter l'utilisation des réseaux de communication dans des systèmes de contrôle-commande industriels. Cette troisième édition annule et remplace la deuxième édition publiée en 2010, dont elle constitue une révision technique. Cette édition inclut les modifications suivantes: Ajout d'une nouvelle Annexe C (normative). Ajout de nouveaux connecteurs. La présente norme doit être utilisée conjointement à la CEI 61918:2013.

Industrijska komunikacijska omrežja - Profili - 5-11. del: Inštalacija procesnih vodil - Inštalacijski profili za CPF 11 (IEC 61784-5-11:2013)

General Information

• Status: Published
• Publication Date: 12-Dec-2013
• Withdrawal Date: 21-Oct-2016
• ICS: 25.040.40 - Industrial process measurement and control
• ICS: 35.100.40 - Transport layer
• Technical Committee: CLC/TC 65X - Industrial-process measurement, control and automation
• Drafting Committee: IEC/SC 65C - IEC_SC_65C
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 13-Dec-2013
• Completion Date: 13-Dec-2013
• Ref Project: SIST EN 61784-5-11:2014 - Industrial communication networks - Profiles -- Part 5-11: Installation of fieldbuses - Installation profiles for CPF 11

Relations

• Replaces: EN 61784-5-11:2012 - Industrial communication networks - Profiles - Part 5-11: Installation of fieldbuses - Installation profiles for CPF 11
• Effective Date: 29-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
01-april-2014
1DGRPHãþD
SIST EN 61784-5-11:2012
Industrijska komunikacijska omrežja - Profili - 5-11. del: Inštalacija procesnih vodil
- Inštalacijski profili za CPF 11 (IEC 61784-5-11:2013)
Industrial communication networks - Profiles -- Part 5-11: Installation of fieldbuses -
Installation profiles for CPF 11
Industrielle Kommunikationsnetze - Profile -- Teil 5-11: Feldbusinstallation -
Installationsprofile für die Kommunikationsprofilfamilie 11
Réseaux de communication industriels - Profils -- Partie 5-11: Installation des bus de
terrain - Profils d'installation pour CPF 11
Ta slovenski standard je istoveten z: EN 61784-5-11:2013
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.100.40 Transportni sloj Transport layer
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 61784-5-11
NORME EUROPÉENNE
December 2013
EUROPÄISCHE NORM
ICS 25.040.40; 35.100.40 Supersedes EN 61784-5-11:2012

English version
Industrial communication networks -
Profiles -
Part 5-11: Installation of fieldbuses -
Installation profiles for CPF 11
(IEC 61784-5-11:2013)
Réseaux de communication industriels -  Industrielle Kommunikationsnetze -
Profils - Profile -
Partie 5-11: Installation des bus de terrain Teil 5-11: Feldbusinstallation -
- Profils d'installation pour CPF 11 Installationsprofile für die
(CEI 61784-5-11:2013) Kommunikationsprofilfamilie 11
(IEC 61784-5-11:2013)
This European Standard was approved by CENELEC on 2013-10-22. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

CEN-CENELEC Management Centre: Avenue Marnix 17, B - 1000 Brussels

© 2013 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61784-5-11:2013 E
Foreword
The text of document 65C/738/FDIS, future edition 3 of IEC 61784-5-11, prepared by
SC 65C "Industrial networks" of IEC/TC 65 "Industrial-process measurement, control and automation"
was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
The following dates are fixed:
• latest date by which the document has to be (dop) 2014-07-22
implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2016-10-22
• latest date by which the national
standards conflicting with the
document have to be withdrawn
This document supersedes EN 61784-5-11:2012.

EN 61784-5-11:2012:
– addition of a new Annex C (normative).

This standard is to be used in conjunction with EN 61918:2013.

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 61784-5-11:2013 was approved by CENELEC as a
European Standard without any modification.

- 3 - EN 61784-5-11:2013
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Annex ZA of EN 61918:2013 applies, except as follows:

Publication Year Title EN/HD Year
Addition to Annex ZA of EN 61918:2013:
IEC 61918 2013 Industrial communication networks - EN 61918 2013
Installation of communication networks in
industrial premises
IEC 61784-5-11 ®
Edition 3.0 2013-09
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Industrial communication networks – Profiles –

Part 5-11: Installation of fieldbuses – Installation profiles for CPF 11

Réseaux de communication industriels – Profils –

Partie 5-11: Installation des bus de terrain – Profils d'installation pour CPF 11

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX X
ICS 25.040.40; 35.100.40 ISBN 978-2-8322-1062-8

– 2 – 61784-5-11 © IEC:2013
CONTENTS
FOREWORD . 8
INTRODUCTION . 10
1 Scope . 11
2 Normative references . 11
3 Terms, definitions and abbreviated terms . 11
4 CPF 11: Overview of installation profiles . 11
5 Installation profile conventions . 11
6 Conformance to installation profiles . 12
Annex A (normative) CP 11/1 (TCnet-star) specific installation profile . 14
A.1 Installation profile scope . 14
A.2 Normative references . 14
A.3 Installation profile terms, definitions, and abbreviated terms . 14
A.4 Installation planning . 14
A.4.1 General . 14
A.4.2 Planning requirements . 14
A.4.2.1 Safety . 14
A.4.2.2 Security . 14
A.4.2.3 Environmental considerations and EMC . 14
A.4.2.4 Specific requirements for generic cabling in accordance with
ISO/IEC 24702 . 14
A.4.3 Network capabilities . 14
A.4.3.1 Network topology . 14
A.4.3.2 Network characteristics . 15
A.4.4 Selection and use of cabling components . 17
A.4.4.1 Cable selection . 17
A.4.4.2 Connecting hardware selection . 18
A.4.4.3 Connections within a channel/permanent link . 20
A.4.4.4 Terminators . 20
A.4.4.5 Device location and connection . 20
A.4.4.6 Coding and labelling . 20
A.4.4.7 Earthing and bonding of equipment and devices and shielded
cabling . 20
A.4.4.8 Storage and transportation of cables . 20
A.4.4.9 Routing of cables . 20
A.4.4.10 Separation of circuit . 20
A.4.4.11 Mechanical protection of cabling components . 21
A.4.4.12 Installation in special areas . 21
A.4.5 Cabling planning documentation . 21
A.4.6 Verification of cabling planning specification . 21
A.5 Installation implementation . 21
A.5.1 General requirements . 21
A.5.2 Cable installation . 21
A.5.2.1 General requirements for all cabling types . 21
A.5.2.2 Installation and routing . 22
A.5.2.3 Specific requirements for CPs . 22

61784-5-11 © IEC:2013 – 3 –
A.5.2.4 Specific requirements for wireless installation . 22
A.5.2.5 Specific requirements for generic cabling in accordance with
ISO/IEC 24702 . 22
A.5.3 Connector installation . 22
A.5.4 Terminator installation . 22
A.5.5 Device installation . 22
A.5.6 Coding and labelling . 22
A.5.7 Earthing and bonding of equipment and devices and shield cabling . 22
A.5.8 As-implemented cabling documentation . 22
A.6 Installation verification and installation acceptance test . 22
A.6.1 General . 22
A.6.2 Installation verification . 22
A.6.2.1 General . 22
A.6.2.2 Verification according to cabling planning documentation . 22
A.6.2.3 Verification of earthing and bonding . 22
A.6.2.4 Verification of shield earthing . 22
A.6.2.5 Verification of cabling system . 22
A.6.2.6 Cable selection verification . 22
A.6.2.7 Connector verification . 23
A.6.2.8 Connection verification . 23
A.6.2.9 Terminators verification . 23
A.6.2.10 Coding and labelling verification . 23
A.6.2.11 Verification report . 23
A.6.3 Installation acceptance test . 23
A.6.3.1 Gen
...