EN 60286-6:2004

Packaging of components for automatic handling - Part 6: Bulk case packaging for surface mounting components

Is applicable to bulk case packaging capable of containing surface mounting components. The bulk case is designed for transport and storage of components and the supply of components directly or by an appropriate feeder to the placement machine. The bulk case is attached to the automatic handling machine by means of a coupling interface

Gurtung und Magazinierung von Bauelementen für automatische Verarbeitung - Teil 6: Schüttgutbehälter für oberflächenmontierbare Bauelemente

Emballage des composants pour opérations automatisées - Partie 6: Emballage en vrac des composants pour montage en surface

Est applicable à l'emballage en vrac capable de contenir des composants pour montage en surface. L'emballage en vrac est conçu pour le transport et le stockage des composants, et pour fournir des composants directement ou par un chargeur approprié à la machine de placement. L'emballage en vrac est fixé à la machinerie pour opérations automatisées au moyen d'une interface de couplage.

Packaging of components for automatic handling - Part 6: Bulk case packaging for surface mounting components (IEC 60286-6:2004)

General Information

• Status: Published
• Publication Date: 14-Mar-2004
• Withdrawal Date: 28-Feb-2007
• ICS: 31.020 - Electronic components in general
• Technical Committee: CLC/SR 40 - Capacitors and resistors for electronic equipment
• Drafting Committee: IEC/TC 40 - IEC_TC_40
• Parallel Committee: IEC/TC 40 - IEC_TC_40
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 15-Mar-2004
• Completion Date: 15-Mar-2004
• Ref Project: SIST EN 60286-6:2004 - Packaging of components for automatic handling -- Part 6: Bulk case packaging for surface mounting components

Relations

• Replaces: EN 60286-6:1998 - Packaging of components for automatic handling - Part 6: Bulk case packaging for surface mounting components
• Effective Date: 28-Jan-2023

Standards Content (Sample)

SLOVENSKI SIST EN 60286-6:2004

STANDARD
julij 2004
Packaging of components for automatic handling - Part 6: Bulk case packaging for
surface mounting components (IEC 60286-6:2004)
ICS 31.020; 55.160 Referenčna številka
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

EUROPEAN STANDARD EN 60286-6
NORME EUROPÉENNE
EUROPÄISCHE NORM March 2004
ICS 31.020 Supersedes EN 60286-6:1998

English version
Packaging of components for automatic handling
Part 6: Bulk case packaging for surface mounting components
(IEC 60286-6:2004)
Emballage des composants  Gurtung und Magazinierung von
pour opérations automatisées Bauelementen für automatische
Partie 6: Emballage en vrac Verarbeitung
des composants pour montage Teil 6: Schüttgutbehälter für
en surface oberflächenmontierbare Bauelemente
(CEI 60286-6:2004) (IEC 60286-6:2004)

This European Standard was approved by CENELEC on 2004-03-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden,
Switzerland and United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels

© 2004 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 60286-6:2004 E
Foreword
The text of document 40/1365/FDIS, future edition 2 of IEC 60286-6, prepared by IEC TC 40, Capacitors
and resistors for electronic equipment, was submitted to the IEC-CENELEC parallel vote and was
approved by CENELEC as EN 60286-6 on 2004-03-01.

This European Standard supersedes EN 60286-6:1998.

The following dates were fixed:

– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2004-12-01

– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2007-03-01

The International Electrotechnical Commission (IEC) and CENELEC draw attention to the fact that it is
claimed that compliance with this document may involve the use of a patent concerning the structure
of the bulk case given in 4.1.
The IEC and CENELEC take no position concerning the evidence, validity and scope of this patent
right.
The holder of this patent right has assured the IEC that he is willing to negotiate licences under
reasonable and non-discriminatory terms and conditions with applicants throughout the world. In this
respect, the statement of the holder of this patent right is registered with the IEC. Information may be
obtained from:
Murata Manufacturing Co., Ltd.
26-10, 2-Chome Tenjin
Nagaokakyo-Shi
Kyoto 617-8555
JAPAN
Fax: [phone]
E-Mail: [e-mail]
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights other than those identified above. IEC and CENELEC shall not be held responsible for
identifying any or all such patent rights.

Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60286-6:2004 was approved by CENELEC as a European
Standard without any modification.
__________
- 3 - EN 60286-6:2004
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
1) 2)
IEC 60093 - Methods of test for volume resistivity HD 429 S1 1983
and surface resistivity of solid electrical
insulating materials
1)
ISO 180 - Plastics EN ISO 180 2000
Determination of Izod impact strength

1)
ISO 2248 - Packaging - Complete, filled transport EN 22248 1992
packages - Vertical impact test by
dropping
1)
ISO 6906 - Vernier callipers reading to 0,02 mm - -

1)
ISO 11469 - Plastics - Generic identification and EN ISO 11469 2000
marking of plastic products
1)
ISO/IEC 16388 - Information technology - Automatic - -
identification and data capture
techniques - Bar code symbology
specifications - Code 39
1)
Undated reference.
2)
Valid edition at date of issue.

NORME
CEI
INTERNATIONALE IEC
60286-6
INTERNATIONAL
Deuxième édition
STANDARD
Second edition
2004-02
Emballage des composants pour
opérations automatisées –
Partie 6:
Emballage en vrac des composants
pour montage en surface
Packaging of components
for automatic handling –
Part 6:
Bulk case packaging for surface
mounting components
© IEC 2004 Droits de reproduction réservés ⎯ Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including
électronique ou mécanique, y compris la photocopie et les photocopying and microfilm, without permission in writing from
microfilms, sans l'accord écrit de l'éditeur. the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: [phone] Telefax: [phone] E-mail: [e-mail]  Web: www.iec.ch
CODE PRIX
N
Commission Electrotechnique Internationale PRICE CODE
International Electrotechnical Commission
ɆɟɠɞɭɧɚɪɨɞɧɚɹɗɥɟɤɬɪɨɬɟɯɧɢɱɟɫɤɚɹɄɨɦɢɫɫɢɹ
Pour prix, voir catalogue en vigueur
For price, see current catalogue

60286-6 © IEC:2004 – 3 –
CONTENTS
FOREWORD.5
1 Scope.9
2 Normative references.9
3 Terms and definitions .9
4 Requirements .11
4.1 Case assembly .11
4.2 Shutter mechanism.11
4.3 Dimensions .11
4.4 Material .15
4.5 Mechanical characteristics.17
5 Marking .17
Annex A (informative) Packing capacity.19
Annex B (informative) Indication of residual SMDs.23
Annex C (informative) Label information .25
Annex D (informative) Characteristics and test methods of bulk case.27
Figure 1 – Bulk case – General view.11
Figure 2 – Dimensions .13
Table 1 – Dimensions of coupling interface.15
Table A.1 – Capacitors.19
Table A.2 – Resistors.19
Table A.3 – Resistors (cylindrical) .21
Table D.1 – Characteristics and test methods of bulk case .27

60286-6 © IEC:2004 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
PACKAGING OF COMPONENTS FOR AUTOMATIC HANDLING –
Part 6: Bulk case packaging for surface mounting components
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
The International Electrotechnical Commission (IEC) draws attention to the fact that it is claimed that compliance
with this document may involve the use of a patent concerning the structure of the bulk case given in 4.1.
The IEC takes no position concerning the evidence, validity and scope of this patent right.
The holder of this patent right has assured the IEC that he is willing to negotiate licences under reasonable and
non-discriminatory terms and conditions with applicants throughout the world. In this respect, the statement of the
holder of this patent right is registered with the IEC. Information may be obtained from
Murata Manufacturing Co., Ltd.
26-10, 2-Chome Tenjin
Nagaokakyo-Shi
Kyoto 617-8555
JAPAN
Fax: [phone]
E-Mail: [e-mail]
60286-6 © IEC:2004 – 7 –
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights
other than those identified above. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 60286-6 has been prepared by IEC technical committee 40:
Capacitors and resistors for electronic equipment.
This second edition cancels and replaces the first edition issued in 1998. It constitutes an
update and a technical revision.
The text of this standard is based on the following documents:
FDIS Report on voting
40/1365/FDIS 40/1382/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
The committee has decided that the contents of this publication will remain unchanged until
2005. At this date, the publication will be
• reconf
...