This part of IEC 60286 is applicable to the tape packaging of electronic components without leads or with lead stumps, intended to be connected to electronic circuits. It includes only those dimensions that are essential for the taping of components intended for the above-mentioned purposes.
This document also includes requirements related to the packaging of singulated die products including bare die and bumped die (flip chips).

  • Standard
    58 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 60286-1:2017(E) applies to the tape packaging of components with axial leads for use in electronic equipment. In general, the tape is applied to the component leads. It covers requirements for taping techniques used with equipment for the preforming of leads, automatic handling, insertion and other operations, and includes only those dimensions which are essential to the taping of components intended for the above-mentioned purposes. This edition includes the following significant changes with respect to the previous edition: a) a complete revision of the structure (detailed in Annex A) and reworked layout.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day

2020-10-02: EC formal rejection from citation LVD 2014/35/EU
2019-09-24 PeC: unflagged for LVD citation after EC feedback
D156/C038 - BT approved the British NC request for modification of an SNC in EN 61242:1997 and invited CCMC to issue the corresponding amendment.
2021: CLC legacy converted by DCLab NISOSTS

  • Amendment
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This part of IEC 60286 is applicable to the tape packaging of electronic components without
leads or with lead stumps, intended to be connected to electronic circuits. It includes only
those dimensions that are essential for the taping of components intended for the abovementioned
purposes.
This document also includes requirements related to the packaging of singulated die products
including bare die and bumped die (flip chips).

  • Standard
    44 pages
    English language
    sale 10% off
    e-Library read for
    1 day

2016-01-12: no BT decision available about extension of DOW = DOR + 60 months
2015-04-17: Extension of DOW = DOR + 60 Months to be requested to CLC/BT.

  • Amendment
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This part of IEC 60286 applies to the tape packaging of components with axial leads for use in
electronic equipment. In general, the tape is applied to the component leads.
It covers requirements for taping techniques used with equipment for the preforming of leads,
automatic handling, insertion and other operations, and includes only those dimensions which
are essential to the taping of components intended for the above-mentioned purposes.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day

D156/C038 - BT approved the British NC request for modification of an SNC in EN 61242:1997 and invited CCMC to issue the corresponding amendment.

  • Amendment
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 60695-8-1:2016 provides guidance on the measurement and interpretation of heat release from electrotechnical products and materials from which they are constructed. Heat release data can be used as part of fire hazard assessment and in fire safety engineering, as described in IEC 60695-1-11 and IEC 60695-1-12. This third edition cancels and replaces the second edition published in 2008. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
- a modified Introduction;
- reference to IEC 60695-1-12;
- updated normative references;
- revised terms and definitions;
- new text in 4.2.2, 4.2.3, 6.1 and 6.4, including several mandatory statements and
- mandatory statements in a new Subclause 6.5. This standard is to be used in conjunction with IEC 60695-8-2.
Key words: Fire Hazard, Heat Release, Fire Safety Engineering

  • Standard
    54 pages
    English and French language
    sale 15% off

2016-01-12: no BT decision available about extension of DOW = DOR + 60 months
2015-04-17: Extension of DOW = DOR + 60 Months to be requested to CLC/BT.

  • Amendment
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day

Specifies the basic dimensions for cylindrical barrelled delivery spools with conical flanges for winding wires.

  • Standard
    2 pages
    English and French language
    sale 15% off

This part of IEC 60264 defines methods of test for delivery spools for winding wires made from thermoplastic materials in order to determine conformity with the established performance requirements for their properties.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day

Defines methods of test for delivery spools for winding wires made from thermoplastic materials in order to determine conformity with the established performance requirements for their properties.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 60264-3-1:1999+A1:2003 specifies the basic dimensions for taper barrelled delivery spools for winding wires. This consolidated version consists of the second edition (1999) and its amendment 1 (2003). Therefore, no need to order amendment in addition to this publication.

  • Standard
    13 pages
    English and French language
    sale 15% off

IEC 60264-5-1:1997+A1:2003 specifies the basic dimensions for cylindrical barrelled delivery spools with conical flanges for winding wires. This consolidated version consists of the first edition (1997) and its amendment 1 (2003). Therefore, no need to order amendment in addition to this publication.

  • Standard
    12 pages
    English and French language
    sale 15% off

IEC 60264-4-1:1997+A1:2009 defines methods of test for delivery spools for winding wires made from thermoplastic materials in order to determine conformity with the established performance requirements for their properties. This consolidated version consists of the second edition (1997) and its amendment 1 (2009). Therefore, no need to order amendment in addition to this publication.

  • Standard
    21 pages
    English and French language
    sale 15% off

Will supersede EN 61242:1997/A11:2004 and EN 61242:1997/A12:2006

  • Amendment
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day

Amendment 1 - Replace Table 1 and Figure 1

  • Amendment
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day

Amendment 1 - Replacement of Figure 1

  • Amendment
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day

Specifies the requirements for returnable cylindrical barrelled delivery spools with conical flanges made from thermoplastic material.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day

Amendment 1 - Replacement of Figure 1

  • Amendment
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day

Specifies the basic dimensions for taper barrelled delivery spools for winding wires.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day

Specifies the requirements for spool containers made from thermoplastic material and used for taper barrelled delivery spools.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day

Specifies the requirements for returnable taper barrelled delivery spools made from thermoplastic material.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day

Specifies the basic dimensions of containers for taper barrelled delivery spools standardized in EN 60264-3-1.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day

Specifies the basic dimensions of containers for taper barrelled delivery spools standardized in EN 60264-3-1.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day

Specifies the requirements for returnable cylindrical barrelled delivery spools with conical flanges made from thermoplastic material.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day

Specifies the basic dimensions for cylindrical barrelled delivery spools for winding wires.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day

Specifies the requirements for non-returnable cylindrical barrelled delivery spools made from thermoplastic material.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day

Specifies the requirements for returnable taper barrelled delivery spools made from thermoplastic material.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day

Specifies the requirements for non-returnable taper barrelled delivery spools made from thermoplastic material.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day

Specifies the requirements for spool containers made from thermoplastic material and used for taper barrelled delivery spools.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day

Describes the methods of test for containers made from thermoplastic material to be used for taper barrelled delivery spools for winding wires.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day

Specifies the basic dimensions for taper barrelled delivery spools for winding wires.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day

Specifies the basic dimensions for cylindrical barrelled delivery spools with conical flanges for winding wires.

  • Standard
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day

Specifies the requirements for returnable cylindrical barrelled delivery spools made from thermoplastic material.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day

Gives the standard sizes of containers for round winding wires.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day

Specifies the requirements for returnable cylindrical barrelled delivery spools with conical flanges made from thermoplastic material.

  • Standard
    13 pages
    English and French language
    sale 15% off