iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

EN 166101:1999

(Main)

Blank Detail Specification: Surface Acoustic Wave (SAW) filters - Capability approval

Blank Detail Specification: Surface Acoustic Wave (SAW) filters - Capability approval

A blank detail specification is a supplementary document to the sectional specification and contains requirements for the minimum content of detail specifications.

Vordruck für Bauartspezifikation: Oberflächenwellen (OFW-) Filter - Befähigungsanerkennung

Spécification particulière cadre: Filtres à Ondes Acoustiques de Surface (OAS) - Agrément de savoir-faire

Blank detail specification: Surface acoustic wave (SAW) filters - Capability approval

General Information

Status
Published
Publication Date
11-Feb-1999
Withdrawal Date
31-Dec-1999
ICS
31.160 - Electric filters
Technical Committee
CLC/SR 49 - Piezoelectric and dielectric devices for frequency control and selection
Drafting Committee
IEC/TC 49 - IEC_TC_49
Parallel Committee
IEC/TC 49 - IEC_TC_49
Current Stage
6060 - Document made available - Publishing
Start Date
12-Feb-1999
Completion Date
12-Feb-1999
Ref Project
SIST EN 166101:2002 - Blank Detail Specification: Surface Acoustic Wave (SAW) filters - Capability approval

Buy Standard

EN 166101:2002EN 166101:2002
PreviousNext
Standard
EN 166101:2002
English language
8 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Blank detail specification: Surface acoustic wave (SAW) filters - Capability approvalVordruck für Bauartspezifikation: Oberflächenwellen (OFW-) Filter - BefähigungsanerkennungSpécification particulière cadre: Filtres à Ondes Acoustiques de Surface (OAS) - Agrément de savoir-faireBlank Detail Specification:
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN 60368-1:2000/A1:2004(Amendment)
Piezoelectric filters of assessed quality - Part 1: Generic specification
SIST EN 60368-1:2002/A1:2005
  • Amendment
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60368-4-1:2000(Main)
Piezoelectric filters of assessed quality - Part 4-1: Blank detail specification - Capability approval
SIST EN 60368-4-1:2002

Is a supplementary document to the sectional specification and contains requirements for the minimum content of detail specifications.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60368-1:2000(Main)
Piezoelectric filters of assessed quality - Part 1: Generic specification
SIST EN 60368-1:2002

Specifies the methods of test and general requirements for piezoelectric filters of assessed quality using either capability approval or qualification approval procedures.

  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60368-2-2:1999(Main)
Piezoelectric filters - Part 2: Guide to the use of piezoelectric filters - Section 2: Piezoelectric ceramic filters
SIST EN 60368-2-2:2002

Describes passive band-pass filters operating over the frequency range of a few kHz to more than 10 MHz which are commercially availa ble as separate and independent units. Draws attention to some funda mental questions which should be considered by the user before he places an order for a new filter.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 166100:1998(Main)
Sectional Specification: Surface acoustic wave (SAW) filters
SIST EN 166100:2003

D114/118: CLC/TC 49 disbanded

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60939-3:2024(Main)
Passive filter units for electromagnetic interference suppression - Part 3: Passive filter units for which safety tests are appropriate
SIST EN IEC 60939-3:2024

IEC 60939-3:2024 is available as IEC 60939-3:2024 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60939-3:2024 covers passive filters used to attenuate unwanted radio-frequency signals (such as noise or interference) generated from electromagnetic sources. Both single and multi-channel filters within one enclosure or which are built on a printed circuit board forming a compact entity are included within the scope of this document. This document applies to passive filter units for electromagnetic interference suppression for which safety tests are appropriate. This implies that filters specified according to this document will either be connected to mains supplies, when compliance with the mandatory tests of Table B.1 is necessary, or used in other circuit positions where the equipment specification specifies that some or all of these safety tests are required. This document applies to passive filter units, which will be connected to an AC mains or other supply (DC or AC) with a nominal voltage not exceeding 1 000 V AC, with a nominal frequency not exceeding 400 Hz, or 1 500 V DC. Note: For AC use, IEC 60384-14 applies to capacitors which will be connected to AC mains with a nominal frequency not exceeding 100 Hz. This document covers appliance filters (US) but does not cover facility filters, cord-connected filters or direct plug-in filters. These other filters will be covered by another sectional specification. This edition includes the following significant technical changes with respect to the previous edition: a) separated clauses for safety and performance tests; b) added note for use of multiple X capacitors bridging basic insulation in 3 phase filters; c) characteristics and conditions to substitute X and Y capacitors are now described in a separate Subclause 4.1; d) creepage and clearance tables updated and in line with the latest editions of IEC 60938-2 and IEC 60664-1; e) allowing voltage measurement for inductance measurements (7.3); f) added requirements for marking depending on remaining energy after disconnection; g) added content of CTL DSH 2044:2016 for temperature test of IEC filters; h) added note about temperature rise required specimens for safety testing; i) changed index of capacitors in Annex A to avoid confusion between index name and capacitor class; j) moved tests from group 1A to 2. Now, samples in group 1A need to be submitted without potting; k) revision of all parts of the document has taken place based on the ISO/IEC Directives, Part 2:2021, and harmonization with other similar kinds of documents. Annex X contains all cross-references of changes in clause/subclause numbers.

  • Standard
    84 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60939-2:2005/A1:2023(Amendment)
Passive filter units for electromagnetic interference suppression - Part 2: Sectional specification - Passive filter units for which safety tests are appropriate - Test methods and general requirements
SIST EN 60939-2:2005/A1:2024
  • Amendment
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50065-4-1:2023(Main)
Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 4-1: Low voltage decoupling filters - Generic specification
SIST EN 50065-4-1:2023

This document applies to decoupling filters installed on the low voltage mains network and operating in the frequency range 3 kHz to 148,5 kHz. It does not apply to EMI suppression filters incorporated in household equipment or other general electric equipment. It specifies the definitions, requirements and test methods of the functional, technical and environmental characteristics of the decoupling filter, e.g. impedance, transfer function, voltage drop, leakage current and power dissipation. The impedance and the transfer function are referred to the decoupling filter mains power ports (see Figure 1).

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50065-4-5:2023(Main)
Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz Part 4-5: Low voltage decoupling filter - Segmentation filter
SIST EN 50065-4-5:2023

This document applies to segmentation filters in a mains communication system intended for utility networks or household and similar fixed installation including residential, commercial and light industrial buildings. These filters are used to control the coupling of signals between two areas of a mains communication system, as illustrated in Figure 1. This document defines in the relevant frequency range: - the minimum impedance at both ports of the filter, - the minimum attenuation of signals transmitted between the ports of the filter. [Figure 1 - Application of segmentation filters]

  • Standard
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50065-4-6:2023(Main)
Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz Part 4-6: Low voltage decoupling filters - Phase coupler
SIST EN 50065-4-6:2023

This document applies to phase couplers in a mains communication system intended for utility networks or household and similar fixed installation including residential, commercial and light industrial buildings. Phase couplers are used to control the coupling of communication signals between phases or sections of a mains communication system. This document defines - the requirements to ensure a minimum coupling between the phases or sections of a mains communication system, and - the requirements to ensure no change on the safety of the electrical installation.

  • Standard
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day