EN 60368-1:2000
(Main)Piezoelectric filters of assessed quality - Part 1: Generic specification
Piezoelectric filters of assessed quality - Part 1: Generic specification
Specifies the methods of test and general requirements for piezoelectric filters of assessed quality using either capability approval or qualification approval procedures.
Piezoelektrische Filter mit bewerteter Qualität - Teil 1: Fachgrundspezifikation
Filtres piézoélectriques sous assurance de la qualité - Partie 1: Spécification générique
Spécifie les méthodes d'essai et les exigences générales pour les filtres piézoélectriques dont la qualité est garantie par les procédures d'agrément de savoir-faire ou par les procédures d'homologation.
Piezoelectric filters of assessed quality - Part 1: Generic specification (IEC 60368-1:2000)
General Information
Relations
Standards Content (Sample)
SIST EN 60368-1:2002SLOVENSKIseptember 2002prva izdajaSTANDARDPiezoelectric filters of assessed quality - Part 1: Generic specification (IEC 60368-1:2000)©
Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljenoReferenčna številkaSIST EN 60368-1:2002(en)ICS31.140; 31.160
EUROPEAN STANDARD
EN 60368-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2000
ICS 31.140;31.160
English version
Piezoelectric filters of assessed quality Part 1: Generic specification (IEC 60368-1:2000)
Filtres piézoélectriques sous assurance de la qualité Partie 1: Spécification générique (CEI 60368-1:2000) Piezoelektrische Filter mit bewerteter Qualität Teil 1: Fachgrundspezifikation (IEC 60368-1:2000)
This European Standard was approved by CENELEC on 2000-04-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
CENELEC European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2000 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60368-1:2000 E
Page 2 EN 60368-1:2000
Foreword
The text of document 49/448/FDIS, future edition 1 of IEC 60368-1, prepared by IEC TC 49, Piezoelectric and dielectric devices for frequency control and selection, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60368-1 on 2000-04-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2001-01-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2003-04-01
Annexes designated "normative" are part of the body of the standard.
In this standard, annex ZA is normative. Annex ZA has been added by CENELEC. __________
Endorsement notice
The text of the International Standard IEC 60368-1:2000 was approved by CENELEC as a European Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 60617 NOTE: Harmonized in the series EN 60617 (not modified).
__________
Page 3
EN 60368-1:2000
Annex ZA (normative)
Normative references to international publications
with their corresponding European publications
This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies (including amendments).
NOTE
When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies.
Publication Year Title
EN/HD Year
IEC 60027 Series Letter symbols to be used in electrical technology
- -
IEC 60050-561 1991 International electrotechnical vocabulary - Chapter 561: Piezoelectric devices for frequency control and selection
- -
IEC 60068-1 1988 Environmental testing Part 1: General and guidance
EN 60068-11) 1994
IEC 60068-2-1 1990 Part 2: Tests - Tests A: Cold
EN 60068-2-1 1993
IEC 60068-2-2 1974 Part 2: Tests - Test B: Dry heat
EN 60068-2-22) 1993
IEC 60068-2-3 1969 Part 2: Tests - Test Ca: Damp heat, steady state
HD 323.2.3 S23) 1987
IEC 60068-2-6
+ corr. March 1995 1995 Part 2: Tests - Test Fc: Vibration (sinusoidal)
EN 60068-2-6 1995
IEC 60068-2-7 1983 Part 2: Tests - Test Ga and guidance: Acceleration, steady state
EN 60068-2-74) 1993
IEC 60068-2-10 1988 Part 2: Tests - Test J and guidance: Mould growth
HD 323.2.10 S3 1988
IEC 60068-2-13 1983 Part 2: Tests - Test M: Low air pressure
EN 60068-2-13 1999
1) EN 60068-1 includes the corrigendum October 1988 + A1:1992 to IEC 60068-1. 2) EN 60068-2-2
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.