EN 60384-20:2008

Fixed capacitors for use in electronic equipment - Part 20: Sectional specification - Fixed metallized polyphenylene sulfide film dielectric surface mount d.c. capacitors

Is applicable to fixed surface mount capacitors for direct current, with metallized electrodes and polyphenylene sulfide dielectric for use in electronic equipment. These capacitors have metallized connecting pads or soldering strips and are intended to be mounted directly onto substrates for hybrid circuits or onto printed boards. These capacitors may have 'self healing properties' depending on conditions of use. They are primarily intended for applications where the a.c. component is small with respect to the rated voltage. The contents of the corrigendum of February 2008 have been included in this copy.

Festkondensatoren zur Verwendung in Geräten der Elektronik - Teil 20: Rahmenspezifikation - Oberflächenmontierbare Festkondensatoren für Gleichspannung mit metallisierter Polyphenyl-Sulfid-Folie als Dielektrikum

Condensateurs fixes utilisés dans les équipements électroniques - Partie 20: Spécification intermédiaire - Condensateurs fixes pour montage en surface pour courant continu à diélectrique en film de sulfure de polyphénylène métallisé

Fiksni kondenzatorji za elektronsko opremo - 20. del: Področna specifikacija - Fiksni metalizirani enosmerni kondenzatorji za površinsko montažo z dielektrikom iz polifenil sulfidne plasti (IEC 60384-20:200 8 + corrigendum Feb. 2008 )

General Information

• Status: Withdrawn
• Publication Date: 02-Apr-2008
• Withdrawal Date: 31-Jan-2011
• ICS: 31.060.10 - Fixed capacitors
• Technical Committee: CLC/TC 40XA - CLC/TC 40XA
• Drafting Committee: IEC/TC 40 - IEC_TC_40
• Parallel Committee: IEC/TC 40 - IEC_TC_40
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 26-Aug-2018
• Completion Date: 26-Aug-2018
• Ref Project: SIST EN 60384-20:2008 - Fixed capacitors for use in electronic equipment -- Part 20: Sectional specification - Fixed metallized polyphenylene sulfide film dielectric surface mount d.c. capacitors

Relations

• Replaces: EN 60384-20:1999 - Fixed capacitors for use in electronic equipment - Part 20: Sectional specification: Fixed metallized polyphenylene sulfide film dielectric surface mount d.c. capacitors
• Effective Date: 28-Jan-2023
• Replaced By: EN 60384-20:2015 - Fixed capacitors for use in electronic equipment - Part 20: Sectional specification - Fixed metallized polyphenylene sulfide film dielectric surface mount d.c. capacitors
• Effective Date: 28-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
01-junij-2008
1DGRPHãþD
SIST EN 60384-20:2002
)LNVQLNRQGHQ]DWRUML]DHOHNWURQVNRRSUHPRGHO3RGURþQDVSHFLILNDFLMD
)LNVQLPHWDOL]LUDQLHQRVPHUQLNRQGHQ]DWRUML]DSRYUãLQVNRPRQWDåR]GLHOHNWULNRP
L]SROLIHQLOVXOILGQHSODVWL,(&FRUULJHQGXP)HE
Fixed capacitors for use in electronic equipment - Part 20: Sectional specification - Fixed
metallized polyphenylene sulfide film dielectric surface mount d.c. capacitors (IEC 60384
-20:2008 + corrigendum Feb. 2008)
Festkondensatoren zur Verwendung in Geräten der Elektronik - Teil 20:
Rahmenspezifikation - Oberflächenmontierbare Festkondensatoren für Gleichspannung
mit metallisierter Polyphenyl-Sulfid-Folie als Dielektrikum (CEI 60384-20:200 8 +
corrigendum Feb. 2008 )
Condensateurs fixes utilisés dans les équipements électroniques - Partie 20:
Spécification intermédiaire - Condensateurs fixes pour montage en surface pour courant
continu à diélectrique en film de sulfure de polyphénylène métallisé (IEC 60384-20:200 8
+ corrigendum Feb. 2008 )
Ta slovenski standard je istoveten z: EN 60384-20:2008
ICS:
31.060.10 Fiksni kondenzatorji Fixed capacitors
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 60384-20
NORME EUROPÉENNE
April 2008
EUROPÄISCHE NORM
ICS 31.060.10 Supersedes EN 60384-20:1999

English version
Fixed capacitors for use in electronic equipment -
Part 20: Sectional specification -
Fixed metallized polyphenylene sulfide film
dielectric surface mount d.c. capacitors
(IEC 60384-20:2008 + corrigendum 2008)

Condensateurs fixes utilisés  Festkondensatoren zur Verwendung
dans les équipements électroniques - in Geräten der Elektronik -
Partie 20: Spécification intermédiaire - Teil 20: Rahmenspezifikation -
Condensateurs fixes pour montage Oberflächenmontierbare
en surface pour courant continu Festkondensatoren für Gleichspannung
à diélectrique en film de sulfure mit metallisierter Polyphenyl-Sulfid-Folie
de polyphénylène métallisé als Dielektrikum
(CEI 60384-20:2008 + (IEC 60384-20:2008 +
corrigendum 2008) Corrigendum 2008)

This European Standard was approved by CENELEC on 2008-02-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels

© 2008 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60384-20:2008 E
Foreword
The text of document 40/1871/FDIS, future edition 2 of IEC 60384-20, prepared by IEC TC 40, Capacitors
and resistors for electronic equipment, was submitted to the IEC-CENELEC parallel vote and was
approved by CENELEC as EN 60384-20 on 2008-02-01.
This European Standard supersedes EN 60384-20:1999.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2008-11-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2011-02-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60384-20:2008 + corrigendum February 2008 was approved
by CENELEC as a European Standard without any modification.
__________
- 3 - EN 60384-20:2008
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year

1) 2)
IEC 60062 - Marking codes for resistors and capacitors EN 60062 2005
+ corr. January 2007
1)
IEC 60063 - Preferred number series for resistors and - -
capacitors
1) 2)
IEC 60068-1 - Environmental testing - EN 60068-1 1994
Part 1: General and guidance
IEC 60384-1 (mod) 1999 Fixed capacitors for use in electronic EN 60384-1 2001
equipment - + corr. October 2001
Part 1: Generic specification
1)
IEC 60410 - Sampling plans and procedures for inspection - -
by attributes
1)
ISO 3 - Preferred numbers - Series of preferred - -
numbers
1)
Undated reference.
2)
Valid edition at date of issue.

IEC 60384-20
Edition 2.0 2008-01
INTERNATIONAL
STANDARD
QC 302000
Fixed capacitors for use in electronic equipment –
Part 20: Sectional specification – Fixed metallized polyphenylene sulfide film
dielectric surface mount d.c. capacitors

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
T
ICS 31.060.10 ISBN 2-8318-9547-2

– 2 – 60384-20 © IEC:2008(E)
CONTENTS
FOREWORD.4

1 General .6
1.1 Scope.6
1.2 Object .6
1.3 Normative references .6
1.4 Information to be given in a detail specification .6
1.4.1 Outline drawing and dimensions .7
1.4.2 Mounting .7
1.4.3 Ratings and characteristics.7
1.4.4 Marking .7
1.5 Terms and definitions .8
1.6 Marking .8
2 Preferred ratings and characteristics .9
2.1 Preferred characteristics .9
2.1.1 Preferred climatic categories .9
2.2 Preferred values of ratings .9
2.2.1 Rated capacitance (C ) .9
R
2.2.2 Tolerance on rated capacitance.9
2.2.3 Rated voltage (U ) .10
R
2.2.4 Category voltage (U ) .10
C
2.2.5 Rated temperature.10
3 Quality assessment procedures.10
3.1 Primary stage of manufacture.10
3.2 Structurally similar components.10
3.3 Certified records of released lots.10
3.4 Qualification approval.10
3.4.1 Qualification approval on the basis of the fixed sample size
procedure .10
3.4.2 Tests .11
3.5 Quality conformance inspection.16
3.5.1 Formation of inspection lots.16
3.5.2 Test schedule .17
3.5.3 Delayed delivery.17
3.5.4 Assessment levels.17
4 Test and measurement procedures.18
4.1 Mounting .18
4.2 Visual examination and check of dimensions.18
4.2.1 Visual examination .18
4.2.2 Requirements .18
4.3 Electrical tests.18
4.3.1 Voltage proof.18
4.3.2 Capacitance .19
4.3.3 Tangent of loss angle (tan δ) .19
4.3.4 Insulation resistance.20
4.4 Adhesion .21

60384-20 © IEC:2008(E) – 3 –
4.5 Bond strength of the end of plating.21
4.5.1 Initial measurement .21
4.5.2 Final inspection .21
4.6 Resistance to soldering heat .21
4.6.1 Initial measurement .21
4.6.2 Test conditions .21
4.6.3 Final inspection, measurements and requirements .21
4.7 Solderability .22
4.7.1 Test conditions .22
4.7.2 Final inspection, measurements and requirements .22
4.8 Rapid change of temperature .22
4.8.1 Initial measurements .22
4.8.2 Number of cycles: 5.22
4.8.3 Intermediate inspection .22
4.9 Climatic sequence .22
4.9.1 Initial measurements .22
4.9.2 Dry heat .22
4.9.3 Damp heat, cyclic, test Db, first cycle .22
4.9.4 Cold .22
4.9.5 Damp heat, cyclic, test Db, remaining cycles .23
4.9.6 Final inspection, measurements and requirements .23
4.10 Damp heat, steady state.23
4.10.1 Initial measurements .23
4.10.2 Final inspection, measurements and requirements .23
4.11 Endurance.23
4.11.1 Initial measurements .23
4.12 Charge and discharge .
...