EN 61094-2:2009/A1:2022
(Amendment)Electroacoustics - Measurement microphones - Part 2: Primary method for pressure calibration of laboratory standard microphones by the reciprocity technique
Electroacoustics - Measurement microphones - Part 2: Primary method for pressure calibration of laboratory standard microphones by the reciprocity technique
No scope available
Elektroakustik - Messmikrofone - Teil 2: Primärverfahren zur Druckkammer-Kalibrierung von Laboratoriums-Normalmikrofonen nach der Reziprozitätsmethode
Electroacoustique - Microphones de mesure - Partie 2: Méthode primaire pour l'étalonnage en pression des microphones étalons de laboratoire par la méthode de la réciprocité
Elektroakustika - Merilni mikrofoni - 2. del: Primarna metoda za kalibriranje tlaka laboratorijskih standardnih mikrofonov z recipročno tehniko - Dopolnilo A1 (IEC 61094-2:2009/AMD1:2022)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 61094-2:2009/A1:2022
01-maj-2022
Elektroakustika - Merilni mikrofoni - 2. del: Primarna metoda za kalibriranje tlaka
laboratorijskih standardnih mikrofonov z recipročno tehniko - Dopolnilo A1 (IEC
61094-2:2009/AMD1:2022)
Electroacoustics - Measurement microphones - Part 2: Primary method for pressure
calibration of laboratory standard microphones by the reciprocity technique (IEC 61094-
2:2009/AMD1:2022)
Elektroakustik - Messmikrofone - Teil 2: Primärverfahren zur Druckkammer-Kalibrierung
von Laboratoriums-Normalmikrofonen nach der Reziprozitätsmethode (IEC 61094-
2:2009/AMD1:2022)
Electroacoustique - Microphones de mesure - Partie 2: Méthode primaire pour
l'étalonnage en pression des microphones étalons de laboratoire par la méthode de
réciprocité (IEC 61094-2:2009/AMD1:2022)
Ta slovenski standard je istoveten z: EN 61094-2:2009/A1:2022
ICS:
17.140.50 Elektroakustika Electroacoustics
33.160.50 Pribor Accessories
SIST EN 61094-2:2009/A1:2022 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 61094-2:2009/A1:2022
---------------------- Page: 2 ----------------------
SIST EN 61094-2:2009/A1:2022
EUROPEAN STANDARD EN 61094-2:2009/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM March 2022
ICS 17.140.50
English Version
Electroacoustics - Measurement microphones - Part 2: Primary
method for pressure calibration of laboratory standard
microphones by the reciprocity technique
(IEC 61094-2:2009/AMD1:2022)
Electroacoustique - Microphones de mesure - Partie 2: Elektroakustik - Messmikrofone - Teil 2: Primärverfahren
Méthode primaire pour l'étalonnage en pression des zur Druckkammer-Kalibrierung von Laboratoriums-
microphones étalons de laboratoire par la méthode de la Normalmikrofonen nach der Reziprozitätsmethode
réciprocité (IEC 61094-2:2009/AMD1:2022)
(IEC 61094-2:2009/AMD1:2022)
This amendment A1 modifies the European Standard EN 61094-2:2009; it was approved by CENELEC on 2022-03-11. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 61094-2:2009/A1:2022 E
---------------------- Page: 3 ----------------------
SIST EN 61094-2:2009/A1:2022
EN 61094-2:2009/A1:2022 (E)
European foreword
The text of document 29/1108/FDIS, future IEC 61094-2/AMD1, prepared by IEC/TC 29
"Electroacoustics" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
EN 61094-2:2009/A1:2022.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2022-12-11
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2025-03-11
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 61094-2:2009/AMD1:2022 was approved by CENELEC as
a European Standard without any modification.
2
---------------------- Page: 4 ----------------------
SIST EN 61094-2:2009/A1:2022
IEC 61094-2
®
Edition 2.0 2022-02
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
A MENDMEN
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.