EN 62264-2:2008

Enterprise-control system integration - Part 2: Object model attributes

Specifies generic interface content between manufacturing control functions and other enterprise functions. The interfaces considered are the interfaces between Levels 3 and 4 of the hierarchical model defined in IEC 62264-1. The goal is to reduce the risk, cost, and errors associated with implementing these interfaces.

Integration von Unternehmensführungs- und Leitsystemen - Teil 2: Attribute des Objektmodells

Intégration des systèmes entreprise-contrôle - Partie 2: Attributs pour les modèles d'objets

Spécifie le contenu générique des interfaces entre les fonctions de contrôle de fabrication et les autres fonctions de l'entreprise. Les interfaces considérées sont les interfaces entre les niveaux 3 et 4 du modèle hiérarchique défini dans la CEI 62264-1. Le but est de réduire le risque, le coût et les erreurs associés à la mise en application de ces interfaces.

Integracija sistemov za upravljanje podjetij - 2. del: Lastnosti objektnega modela (IEC 62264-2:2005)

General Information

• Status: Withdrawn
• Publication Date: 08-Jan-2008
• Withdrawal Date: 30-Nov-2010
• ICS: 25.040.40 - Industrial process measurement and control
• ICS: 35.240.50 - IT applications in industry
• Technical Committee: CLC/TC 65X - Industrial-process measurement, control and automation
• Drafting Committee: IEC/SC 65A - IEC_SC_65A
• Parallel Committee: IEC/SC 65A - IEC_SC_65A
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 01-Aug-2016
• Completion Date: 01-Aug-2016
• Ref Project: SIST EN 62264-2:2008 - Enterprise-control system integration -- Part 2: Object model attributes

Relations

• Replaced By: EN 62264-2:2013 - Enterprise-control system integration - Part 2: Objects and attributes for enterprise-control system integration
• Effective Date: 28-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
01-junij-2008
Integracija sistemov za upravljanje podjetij - 2. del: Lastnosti objektnega modela
(IEC 62264-2:2005)
Enterprise-control system integration -- Part 2: Object model attributes
Integration von Unternehmensführungs- und Leitsystemen -- Teil 2: Attribute des
Objektmodells
Intégration des systèmes entreprise-contrôle -- Partie 2: Attributs pour les modèles
d'objets
Ta slovenski standard je istoveten z: EN 62264-2:2008
ICS:
25.040.01 Sistemi za avtomatizacijo v Industrial automation
industriji na splošno systems in general
35.240.50 Uporabniške rešitve IT v IT applications in industry
industriji
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 62264-2
NORME EUROPÉENNE
January 2008
EUROPÄISCHE NORM
ICS 25.040.40; 35.240.50
English version
Enterprise-control system integration -
Part 2: Object model attributes
(IEC 62264-2:2004)
Intégration des systèmes  Integration von Unternehmensführungs-
entreprise-contrôle - und Leitsystemen -
Partie 2: Attributs pour les modèles Teil 2: Attribute des Objektmodells
d'objets (IEC 62264-2:2004)
(CEI 62264-2:2004)
This European Standard was approved by CENELEC on 2007-12-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels

© 2008 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62264-2:2008 E
For approval
Foreword
The text of the International Standard IEC 62264-2:2004, prepared by SC 65A, System aspects, of
IEC TC 65, Industrial-process measurement, control and automation, and ISO TC 184/SC 5/JWG 15,
Enterprise-control system integration, was submitted to the Unique Acceptance Procedure and was
approved by CENELEC as EN 62264-2 on 2007-12-01 without any modification.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2008-12-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2010-12-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 62264-2:2004 was approved by CENELEC as a European
Standard without any modification.
__________
For approval
- 3 - EN 62264-2:2008
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
1) 2)
IEC 62264-1 - Enterprise-control system integration - EN 62264-1 2008
Part 1: Models and terminology

ISO 10303-1 1994 Industrial automation systems and ENV ISO 10303-1 1995
integration - Product data representation and
exchange -
Part 1: Overview and fundamental principles

ISO 15704 2000 Industrial automation systems - - -
Requirements for enterprise-reference
architectures and methodologies

1)
Undated reference.
2)
Valid edition at date of issue.
For approval
NORME CEI
INTERNATIONALE
IEC
62264-2
INTERNATIONAL
Première édition
STANDARD
First edition
2004-07
Intégration des systèmes entreprise-contrôle –

Partie 2:
Attributs pour les modèles d'objets

Enterprise-control system integration –

Part 2:
Object model attributes
 IEC 2005 Droits de reproduction réservés  Copyright - all rights reserved

Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including

électronique ou mécanique, y compris la photocopie et les photocopying and microfilm, without permission in writing from

microfilms, sans l'accord écrit de l'éditeur. the publisher.

International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland

Telephone: [phone] Tel

efax: [phone] E-mail: [e-mail] Web: www.iec.ch
CODE PRIX
XE
PRICE CODE
Pour prix, voir catalogue en vigueur
For price, see current catalogue

62264-2  IEC:2005 – 3 –
CONTENTS
FOREWORD.15
INTRODUCTION.19

1 Scope.21
2 Normative references .21
3 Terms and definitions .21
4 Object model attributes.23
4.1 General .23
4.2 Attribute extensibility .23
4.3 Object model structure .23
4.4 Explanation of tables .25
4.4.1 Tables of attributes.25
4.4.2 Object identification.25
4.4.3 Data types .27
4.4.4 Presentation of examples .27
4.4.5 Data relationships.27
4.5 Personnel.31
4.5.1 Personnel model.31
4.5.2 Personnel class .31
4.5.3 Personnel class property .33
4.5.4 Person.33
4.5.5 Person property.35
4.5.6 Qualification test specification .35
4.5.7 Qualification test result .37
4.6 Equipment.37
4.6.1 Equipment model.37
4.6.2 Equipment class .39
4.6.3 Equipment class property .39
4.6.4 Equipment .41
4.6.5 Equipment property .41
4.6.6 Equipment capability test specification .43
4.6.7 Equipment capability test result .43
4.6.8 Maintenance request .45
4.6.9 Maintenance work order .45
4.6.10 Maintenance response.47
4.7 Material .49
4.7.1 Material model.49
4.7.2 Material class .49
4.7.3 Material class property .51
4.7.4 Material definition .51
4.7.5 Material definition property .51
4.7.6 Material lot .53
4.7.7 Material lot property.53
4.7.8 Material sublot.55
4.7.9 QA test specification.55
4.7.10 QA test result .57

62264-2  IEC:2005 – 5 –
4.8 Process segment.59
4.8.1 Process segment model .59
4.8.2 Process segment.59
4.8.3 Personnel segment specification .61
4.8.4 Personnel segment specification property.63
4.8.5 Equipment segment specification .63
4.8.6 Equipment segment specification property.65
4.8.7 Material segment specification.65
4.8.8 Material segment specification property.67
4.8.9 Process segment parameter .67
4.8.10 Process segment dependency .67
4.9 Production capability .71
4.9.1 Production capability model.71
4.9.2 Production capability .73
4.9.3 Personnel capability .75
4.9.4 Personnel capability property .77
4.9.5 Equipment capability .79
4.9.6 Equipment capability property.81
4.9.7 Material capability .83
4.9.8 Material capability property.85
4.10 Process segment capability .87
4.10.1 Process segment capability model.87
4.10.2 Process segment capability .89
4.10.3 Personnel segment capability .91
4.10.4 Personnel segment capability property .91
4.10.5 Equipment segment capability .93
4.10.6 Equipment segment capability property .95
4.10.7 Material segme
...