EN 61300-2-47:2010

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-47: Tests - Thermal shocks

IEC 61300-2-47:2010 details a procedure for determining the suitability of a fibre optic device to withstand the effects of thermal shock. In practice this means a very short change over time between extreme temperatures. The significant changes include the review of the test severity.

Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und Messverfahren - Teil 2-47: Prüfungen - Temperaturschock

Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes fondamentales d'essais et de mesures - Partie 2-47: Essais - Chocs thermiques

La CEI 61300-2-47:2010 détaille une méthode pour déterminer l'aptitude d'un dispositif à fibres optiques à résister aux effets des chocs thermiques. En pratique, cela correspond à un temps de passage très court entre des températures extrêmes. Parmi les modifications significatives, la sévérité d'essai a été revue.

Optični spojni elementi in pasivne komponente - Osnovni preskuševalni in merilni postopki - 2-47. del: Preskušanje - Toplotni udar (IEC 61300-2-47:2010)

Ta del IEC 61300 podrobno opisuje postopek ugotavljanja primernosti optičnega elementa, da kljubuje učinkom toplotnega udara. V praksi to pomeni zelo kratko časovno spremembo med skrajnimi temperaturami.

General Information

• Status: Withdrawn
• Publication Date: 04-Nov-2010
• Withdrawal Date: 31-Oct-2011
• ICS: 33.180.20 - Fibre optic interconnecting devices
• Technical Committee: CLC/TC 86BXA - Fibre optic interconnect, passive and connectorised components
• Drafting Committee: IEC/SC 86B - IEC_SC_86B
• Parallel Committee: IEC/SC 86B - IEC_SC_86B
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 23-Jun-2019
• Completion Date: 23-Jun-2019
• Ref Project: SIST EN 61300-2-47:2011 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-47: Tests - Thermal shocks (IEC 61300-2-47:2010)

Relations

• Replaces: EN 61300-2-47:2007 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-47: Tests - Thermal shocks
• Effective Date: 29-Jan-2023
• Replaced By: EN 61300-2-47:2016 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-47: Tests - Thermal shocks
• Effective Date: 24-Mar-2015

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61300-2-47:2011
01-januar-2011
1DGRPHãþD
SIST EN 61300-2-47:2007
2SWLþQLVSRMQLHOHPHQWLLQSDVLYQHNRPSRQHQWH2VQRYQLSUHVNXãHYDOQLLQPHULOQL
SRVWRSNLGHO3UHVNXãDQMH7RSORWQLXGDU,(&
Fibre optic interconnecting devices and passive components - Basic test and
measurement procedures - Part 2-47: Tests - Thermal shocks (IEC 61300-2-47:2010)
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und
Messverfahren - Teil 2-47: Prüfungen - Temperaturschock (IEC 61300-2-47:2010)
Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes
fondamentales d'essais et de mesures - Partie 2-47: Essais - Chocs thermiques (IEC
61300-2-47:2010)
Ta slovenski standard je istoveten z: EN 61300-2-47:2010
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
SIST EN 61300-2-47:2011 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61300-2-47:2011

---------------------- Page: 2 ----------------------

SIST EN 61300-2-47:2011

EUROPEAN STANDARD
EN 61300-2-47

NORME EUROPÉENNE
November 2010
EUROPÄISCHE NORM

ICS 33.180.20 Supersedes EN 61300-2-47:2007


English version


Fibre optic interconnecting devices and passive components -
Basic test and measurement procedures -
Part 2-47: Tests -
Thermal shocks
(IEC 61300-2-47:2010)


Dispositifs d'interconnexion et composants Lichtwellenleiter -
passifs à fibres optiques - Verbindungselemente und passive
Méthodes fondamentales d'essais et de Bauteile -
mesures - Grundlegende Prüf- und Messverfahren -
Partie 2-47: Essais - Teil 2-47: Prüfungen -
Chocs thermiques Temperaturschock
(CEI 61300-2-47:2010) (IEC 61300-2-47:2010)




This European Standard was approved by CENELEC on 2010-11-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2010 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61300-2-47:2010 E

---------------------- Page: 3 ----------------------

SIST EN 61300-2-47:2011
EN 61300-2-47:2010 - 2 -
Foreword
The text of document 86B/3069/FDIS, future edition 3 of IEC 61300-2-47, prepared by SC 86B, Fibre
optic interconnecting devices and passive components, of IEC TC 86, Fibre optics, was submitted to the
IEC-CENELEC parallel vote and was approved by CENELEC as EN 61300-2-47 on 2010-11-01.
This European Standard supersedes EN 61300-2-47:2007.
It constitutes a technical revision. The significant changes include the review of the test severity.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent
rights.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2011-08-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2011-11-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61300-2-47:2010 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 61753-1 NOTE  Harmonized as EN 61753-1.
__________

---------------------- Page: 4 ----------------------

SIST EN 61300-2-47:2011
- 3 - EN 61300-2-47:2010
Annex ZA
(normative)

Norm
...