iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

FprEN 50436-7:2024

(Main)

Alcohol interlocks - Test methods and performance requirements - Part 7: Installation document

Alcohol interlocks - Test methods and performance requirements - Part 7: Installation document

This document defines the content and the layout of an installation document providing necessary and useful information about the aftermarket installation of an alcohol interlock into a vehicle. It details the type of the vehicle, connection schematics, accessibility instructions and recommendations to avoid safety risks. The content and layout ensures that the information document is easy to use by installers in different countries and can be available in paper or electronic format. This document is applicable to alcohol interlocks according to EN 50436-1:2023. This document is mostly intended for vehicle manufacturers and manufacturers of alcohol interlocks. This document does not apply to: - the process of handling the installation documents; - the installation process; - information related to education and training for installers; - general performance requirements for alcohol interlocks (see EN 50436-1:2023); - the installation of the alcohol interlock during the production of the vehicle.

Alkohol-Interlocks - Prüfverfahren und Anforderungen an das Betriebsverhalten - Teil 7: Einbaudokument

Dieses Dokument legt den Inhalt und das Layout eines Einbaudokuments fest, das notwendige und hilfreiche Informationen für die Nachrüstung eines Alkohol-Interlocks in ein Fahrzeug zur Verfügung stellt. Es beschreibt detailliert den Fahrzeugtyp, schematische Darstellungen für den Anschluss, Anleitungen für die Erreichbarkeit und Empfehlungen zur Vermeidung von Sicherheitsrisiken. Die Inhalte und das Layout stellen sicher, dass das Einbaudokument durch Monteure in unterschiedlichen Ländern einfach zu benutzen ist und dass es in Papierform oder in elektronischer Form verfügbar sein kann. Dieses Dokument ist für Alkohol-Interlocks nach EN 50436-1:2023 anwendbar. Dieses Dokument richtet sich hauptsächlich an Fahrzeughersteller und an Hersteller von Alkohol-Interlocks. Dieses Dokument gilt nicht für: - den Prozess der Handhabung des Einbaudokuments; - den Einbauprozess; - Informationen im Zusammenhang mit Ausbildung und Training der Monteure; - allgemeine Anforderungen an das Betriebsverhalten von Alkohol-Interlocks (siehe EN 50436-1:2023); - den Einbau des Alkohol-Interlocks während der Fahrzeugherstellung.

Ethylotests antidémarrage - Méthodes d'essais et exigences de performance - Partie 7: Document d'installation

Le présent document définit le contenu et la présentation d’un document d’installation apportant des informations nécessaires et utiles sur l’installation après mise sur le marché d’un éthylotest antidémarrage dans un véhicule. Il spécifie le type de véhicule, les schémas de connexion, les instructions d’accessibilité et des recommandations pour éviter les risques pour la sécurité. Le contenu et la présentation assurent que le document d’information est facile à utiliser par les installateurs de différents pays; il peut être disponible au format papier ou électronique. Le présent document s’applique aux éthylotests antidémarrage selon l’EN 50436-1:2023. Le présent document est principalement destiné aux constructeurs de véhicules et aux fabricants d’éthylotests antidémarrage. Le présent document ne s’applique pas - au processus de gestion des documents d’installation, - au processus d’installation, - aux informations relatives à la formation de base et à la formation continue des installateurs, - aux exigences générales de performance pour les éthylotests antidémarrage (voir l’EN 50436-1:2023), - à l’installation de l’éthylotest antidémarrage au cours de la production du véhicule.

Alkoholne zapore - Preskusne metode in zahtevane lastnosti - 7. del: Navodilo za namestitev

General Information

Status
Not Published
Publication Date
18-Jul-2024
ICS
43.040.10 - Electrical and electronic equipment
71.040.40 - Chemical analysis
Technical Committee
CLC/BTTF 116-2 - Alkohol-Interlocks
Drafting Committee
CLC/BTTF 116-2 - Alkohol-Interlocks
Current Stage
5020 - Vote circulated - Formal Approval
Start Date
29-Mar-2024
Due Date
14-Feb-2024
Completion Date
29-Mar-2024
Directive
2018/858 - Regulation (EU) 2018/858 of the European Parliament and of the Council of 30 May 2018 on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles, amending Regulations (EC) No 715/2007 and (EC) No 595/2009 and repealing Directive 2007/46/EC
Ref Project
kSIST FprEN 50436-7:2024 - Alcohol interlocks - Test methods and performance requirements - Part 7: Installation document

Relations

Revises
EN 50436-7:2016 - Alcohol interlocks - Test methods and performance requirements - Part 7: Installation document
Effective Date
08-Mar-2022

Buy Standard

prEN 50436-7:2023 - BARVEprEN 50436-7:2023 - BARVE
PreviousNext
Draft
prEN 50436-7:2023 - BARVE
English language
18 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 50436-7:2023
01-junij-2023
Alkoholne zapore - Preskusne metode in zahtevane lastnosti - 7. del: Navodilo za
namestitev
Alcohol interlocks - Test methods and performance requirements - Part 7: Installation
document
Alkohol-Interlocks - Prüfverfahren und Anforderungen an das Betriebsverhalten - Teil 7:
Einbaudokument
Ethylotests anti-démarrage - Méthodes d'essais et exigences de performance - Partie 7:
Document d'installation
Ta slovenski standard je istoveten z: prEN 50436-7:2023
ICS:
13.200 Preprečevanje nesreč in Accident and disaster control
katastrof
43.040.80 Sistemi za zaščito pri trku in Crash protection and
sistemi za zadrževanje restraint systems
potnikov
oSIST prEN 50436-7:2023 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 50436-7:2023

---------------------- Page: 2 ----------------------
oSIST prEN 50436-7:2023


EUROPEAN STANDARD DRAFT
prEN 50436-7
NORME EUROPÉENNE

EUROPÄISCHE NORM

April 2023
ICS 43.040.10; 71.040.40 Will supersede EN 50436-7:2016
English Version
Alcohol interlocks - Test methods and performance requirements
- Part 7: Installation document
Ethylotests anti-démarrage - Méthodes d'essais et Alkohol-Interlocks - Prüfverfahren und Anforderungen an
exigences de performance - Partie 7: Document das Betriebsverhalten - Teil 7: Einbaudokument
d'installation
This draft European Standard is submitted to CENELEC members for enquiry.
Deadline for CENELEC: 2023-07-21.

It has been drawn up by CLC/BTTF 116-2.

If this draft becomes a European Standard, CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CENELEC in three official versions (English, French, German).
A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to
the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.



European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Project: 75536 Ref. No. prEN 50436-7:2023 E

---------------------- Page: 3 ----------------------
oSIST prEN 50436-7:2023
prEN 50436-7:2023 (E)
1 Contents Page
2 European foreword . 3
3 Introduction . 4
4 1 Scope . 5
5 2 Normative references . 5
6 3 Terms and definitions . 5
7 4 Installation of an alcohol interlock . 7
8 5 Time behaviour . 8
9 6 Layout and contents of the installation document . 8
10 6.1 General . 8
11 General content and layout .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN 50436-1:2023(Main)
Alcohol interlocks - Test methods and performance requirements - Part 1: Instruments having a mouthpiece and measuring breath alcohol for drink-driving-offender programs and general preventive use
SIST EN 50436-1:2023

This document specifies test methods and performance requirements for alcohol interlocks having a mouthpiece. It covers alcohol interlocks to be used in all general preventive programmes and those for drink driving offenders and legally regulated programmes monitored or controlled in a comparable way. This document can also be used for alcohol interlocks intended for other applications. This document is directed at test laboratories and manufacturers of alcohol interlocks. It defines requirements and test procedures for type testing. Several parameters (such as alcohol concentration or breath volume) are specified in this document for the purpose of type testing according to this document only. NOTE It can be necessary due to national regulations or depending on user requests to set the values of the prescribed parameters differently when the alcohol interlocks are in use. This document also applies to alcohol interlocks integrated into control systems of the vehicle as well as to accessory devices connected to the alcohol interlock. This document does not apply to - instruments measuring the alcohol concentration in the ambient air in the vehicle, - alcohol interlocks not having a mouthpiece, - methods of installation and connections to the vehicle.

  • Standard
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50436-4:2022(Main)
Alcohol interlocks - Test methods and performance requirements - Part 4: Connection and digital interface between the alcohol interlock and the vehicle
SIST EN 50436-4:2022

This document specifies the interface between an alcohol interlock for production and aftermarket installation and a vehicle. It details the modes of electrical connections, the assignment of electrical connection lines as well as the information to be exchanged between the vehicle and the alcohol interlock. This document is applicable to alcohol interlocks for drink-driving-offender programmes (as in EN 50436 1) as well as to alcohol interlocks for general preventive use (as in EN 50436 2). This document is mainly directed at manufacturers of alcohol interlocks and at vehicle manufacturers. This document is referenced in EN 50436 7 and provides details of the preferred data bus connection suggested therein. NOTE This document describes the information exchange using a LIN or a CAN (J1939) connection.

  • Standard
    113 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50436-4:2019(Main)
Alcohol interlocks - Test methods and performance requirements - Part 4: Connection and digital interface between the alcohol interlock and the vehicle
SIST EN 50436-4:2019

The purpose of this new standard is to define a list of functionalities for a standard connector / interface between the vehicle and the alcohol interlock, which can be used for communication between the vehicle and the alcohol interlock in both directions for information exchange. It specifies the interface for an aftermarket installation of alcohol interlocks

  • Standard
    50 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50436-7:2016(Main)
Alcohol interlocks - Test methods and performance requirements - Part 7: Installation document
SIST EN 50436-7:2017

This European Standard defines the content and the layout of an installation document providing necessary and useful information about the aftermarket installation of an alcohol interlock into a vehicle. It details the type of the vehicle, connection schematics, accessibility instructions and recommendations to avoid safety risks. The contents and layout ensures that the information document be easy to use by installers in different countries and may be available in paper or electronic format. This European Standard is applicable to alcohol interlocks according EN 50436-1 and EN 50436-2. This European Standard is mostly intended for vehicle manufacturers and manufacturers of alcohol interlocks. This European Standard does not apply to: - the process of handling the installation documents; - the installation process; - information related to education and training for installers; - general performance requirements for alcohol interlocks (see EN 50436-1 and EN 50436-2); - the installation of the alcohol interlock during the production of the vehicle.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50436-3:2016(Main)
Alcohol interlocks - Test methods and performance requirements - Part 3: Guidance for authorities, decision makers, purchasers and users
SIST EN 50436-3:2017

An alcohol interlock is a system comprising a breath alcohol measuring instrument and an immobiliser which may be easily installed in motor vehicles as passenger cars, coaches, taxis, hazardous goods transporters, lorries, trams, trains, motorcycles, boats, or snow mobiles. Before the vehicle motor can be started or the vehicle can be moved, a breath sample needs to be provided to the alcohol interlock, normally through a mouthpiece. Once the breath alcohol measurement has been performed, the alcohol interlock will prevent drivers from starting the motor if they have an alcohol concentration above a predetermined limit value. This limit may be set at the legal limit of a respective country or lower. Alcohol interlocks that meet the relevant European Standards detect, for example, if the sample is delivered by a human being. They are also capable of preventing and detecting tampering with the instrument. Additional parts of the system may include identity checking or recording mechanisms. The purpose of this European Standard is to give practical guidance for selection, installation, use and maintenance of alcohol interlocks. It is directed to all those who have an interest in alcohol interlocks as well as companies selling and installing alcohol interlocks, purchasers and users for commercial, professional or private use. The European Standard gives information about the alcohol interlock and how it is to be used. This European Standard describes alcohol interlocks for use in vehicles as a general preventive measure in traffic safety as well as for use in drink driving offender programmes. However, information provided may also be useful for alcohol interlocks in other applications.

  • Standard
    46 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50436-1:2014/AC:2016-03(Corrigendum)
Alcohol interlocks - Test methods and performance requirements - Part 1: Instruments for drink-driving-offender programs
SIST EN 50436-1:2014/AC:2016

Corrigendum to French translation

  • Corrigendum
    5 pages
    French language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50436-2:2014/A1:2015(Amendment)
Alcohol interlocks - Test methods and performance requirements - Part 2: Instruments having a mouthpiece and measuring breath alcohol for general preventive use
SIST EN 50436-2:2014/A1:2015

2021: CLC legacy converted by DCLab NISOSTS

  • Amendment
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50436-6:2015(Main)
Alcohol interlocks - Test methods and performance requirements - Part 6: Data security
SIST EN 50436-6:2015

1.1 General This European Standard specifies security requirements for the protection and handling of event records which are stored in the data memory of breath alcohol controlled alcohol interlocks and which may be downloaded, processed and transferred to supervising persons or organizations. This European Standard is a supplement to EN 50436-1. It is to be decided by the respective jurisdiction whether the present standard has to be applied in addition to EN 50436-1. This European standard may also be used as a supplement to EN 50436-2 if a jurisdiction or a vehicle fleet operator decides that the data security in his preventive application has to have the same high level of requirements as for alcohol interlocks used in drink-driving-offender programmes. This European Standard is mainly directed to test houses, manufacturers of alcohol interlocks, legislating authorities and organizations which handle and use the alcohol interlock event records. In this European Standard, the alcohol interlock consists basically of handset and control unit. Optional accessory devices (e.g. cameras or GPS systems generating data related to event data of the alcohol interlock, as well as accessory devices handling or transferring data for a drink-driving-offender programme) authorized by the manufacturer as being part of the alcohol interlock system and which are intended to be used in the vehicle during operation are also to be considered part of the alcohol interlock, where applicable. The service application communicates with the alcohol interlock and sends out the event records to a register, either directly or alternatively indirectly through a broker. The scheme is depicted in Figure 1. It also shows which parts are within the scope of this European Standard and which are outside of the scope. NOTE In this, and all other figures, the direction of the arrows indicates the flow of event records. This European Standard applies to - the alcohol interlock, - the service application. This European Standard does not apply to - data security of the broker, - data security of the register, - storage of downloaded data, - requirements for organizational processes, for example defining rights of access to the data. 1.2 Conformance claim This European Standard conforms according to the Common Criteria for Information Technology Security Evaluation as Protection Profile to: - Common Criteria, Version 3.1, Revision 4, as defined by CCp1, CCp2, CCp3 and CEMe, - Common Criteria - Part 2 as Common Criteria - Part 2 conformant, - Common Criteria - Part 3 as Common Criteria - Part 3 conformant. NOTE 1 An earlier revision of CCp1 is published as ISO/IEC 15408 1. NOTE 2 An earlier revision of CCp2 is published as ISO/IEC 15408 2. NOTE 3 An earlier revision of CCp3 is published as ISO/IEC 15408 3. NOTE 4 An earlier revision of CEMe is published as ISO/IEC 18045. This European Standard is not based on any other Protection Profile. This European Standard conforms to the evaluation assurance level EAL3 + ALC_FLR.2 (for explanation see 7.4). Protection profiles or security targets that conform to this Protection Profile shall apply "Strict Protection-Profile-Conformance". For more information, see CCp1, Annex B5.

  • Standard
    55 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50436-2:2014(Main)
Alcohol interlocks - Test methods and performance requirements - Part 2: Instruments having a mouthpiece and measuring breath alcohol for general preventive use
SIST EN 50436-2:2014

This European Standard specifies test methods and performance requirements for breath alcohol controlled alcohol interlocks having a mouthpiece. It covers alcohol interlocks intended for general preventive use. This European Standard is directed at test laboratories and manufacturers of alcohol interlocks. It defines requirements and test procedures for type approval. Several parameters (for example alcohol concentration or breath volume) are specified in this European Standard for the purpose of type testing according to this standard only. However, it may be necessary due to national regulations or depending on user requests to set the values of the prescribed parameters differently when the alcohol interlocks are in use. This European Standard also applies to alcohol interlocks integrated into other systems of the vehicle. This European Standard does not apply to – alcohol interlocks intended for use in traffic safety programmes for drink driving offenders (see EN 50436-1), – instruments measuring the alcohol concentration in the ambient air in the vehicle, – alcohol interlocks not having a mouthpiece, – methods of installation and connections to the vehicle.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50436-1:2014(Main)
Alcohol interlocks - Test methods and performance requirements - Part 1: Instruments for drink-driving-offender programs
SIST EN 50436-1:2014

This European Standard specifies test methods and performance requirements for breath alcohol con¬trolled alcohol interlocks. It covers alcohol interlocks intended to be used in programmes for drink driving offenders as well as in programmes monitored or controlled in a comparable way. This European Standard is directed at test laboratories and manufacturers of alcohol interlocks. It defines requirements and test procedures for type approval. Several parameters (such as alcohol concentration or breath volume) are specified in this European Standard for the purpose of type testing according to this European Standard only. However, it may be neces¬sary due to national regulations or depending on user requests to set the values of the prescribed parameters differently when the alcohol interlocks are in use. This European Standard also applies to alcohol interlocks integrated into other control systems of the vehicle. This European Standard does not apply to – alcohol interlocks intended for general preventive use (see EN 50436-2), – instruments measuring the alcohol concentration in the ambient air in the vehicle, – alcohol interlocks not having a mouthpiece, – methods of installation and connections to the vehicle.

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day