prEN 50342-5:2024
(Main)Lead-acid starter batteries - Part 5: Mechanical properties of battery housings and handles
Lead-acid starter batteries - Part 5: Mechanical properties of battery housings and handles
This document is applicable to housing and accessory parts of lead-acid batteries made of polypropylene. Lead-acid batteries are used primarily as a power source for the starting of internal combustion engines, lighting and for auxiliary equipment of road vehicles. These batteries are all referred to as starter batteries. This document is applicable to starter batteries for passenger cars and for commercial or industrial vehicles. Battery housing and accessory parts according to this document do not provide any protection of the polypropylene against aging due to light. The parts are intended to be used within the engine compartment or within battery boxes where they are protected from light. The purpose of this document is to define requirements for raw material used to produce housing and accessory parts for starter batteries, to define requirements of the physical properties of battery housing and to define uniform test procedures for validation.
Blei-Akkumulatoren-Starterbatterien - Teil 5: Mechanische Eigenschaften von Batteriegehäusen und Griffen
Batteries d'accumulateurs de démarrage au plomb - Partie 5: Propriétés mécaniques des boîtiers et poignées de batteries
Le présent document s’applique aux parties constitutives des boîtiers et accessoires de batteries d’accumulateurs au plomb en polypropylène. Les batteries d’accumulateurs au plomb sont principalement utilisées comme source d’énergie pour le démarrage des moteurs à combustion interne, pour l’éclairage et pour les équipements auxiliaires des véhicules routiers. Ces batteries sont toutes appelées batteries de démarrage. Le présent document s’applique aux batteries de démarrage destinées aux voitures particulières, ainsi qu’aux véhicules commerciaux ou industriels. Les parties constitutives des boîtiers et accessoires de batterie qui sont conformes au présent document n’assurent aucune protection du polypropylène contre le vieillissement dû à l’exposition à la lumière. Ces parties sont destinées à être utilisées dans le compartiment moteur ou dans des logements de batteries, où elles sont protégées de la lumière. L’objet du présent document est de définir les exigences relatives aux matières premières utilisées pour fabriquer les pièces constitutives des boîtiers et accessoires des batteries de démarrage, de définir les exigences relatives aux propriétés physiques du boîtier de batterie et de définir des procédures d’essai uniformes pour la validation.
Svinčeno-kislinske zaganjalne baterije - 5. del: Lastnosti baterijskih ohišij in ročic
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN 50342-5:2024
01-marec-2024
Svinčeno-kislinske zaganjalne baterije - 5. del: Lastnosti baterijskih ohišij in ročic
Lead-acid starter batteries - Part 5: Properties of battery housings and handles
Blei-Akkumulatoren-Starterbatterien - Teil 5: Eigenschaften der Batteriekästen und -griffe
Batteries d'accumulateurs de démarrage au plomb - Partie 5: Propriétés des poignées et
des bacs et couvercles de batteries
Ta slovenski standard je istoveten z: prEN 50342-5:2024
ICS:
29.220.20 Kislinski sekundarni členi in Acid secondary cells and
baterije batteries
oSIST prEN 50342-5:2024 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 50342-5:2024
---------------------- Page: 2 ----------------------
oSIST prEN 50342-5:2024
EUROPEAN STANDARD DRAFT
prEN 50342-5
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2024
ICS 29.220.20 Will supersede EN 50342-5:2010; EN 50342-
5:2010/AC:2011
English Version
Lead-acid starter batteries - Part 5: Properties of battery
housings and handles
Batteries d'accumulateurs de démarrage au plomb - Partie Blei-Akkumulatoren-Starterbatterien - Teil 5: Eigenschaften
5: Propriétés des poignées et des bacs et couvercles de der Batteriekästen und -griffe
batteries
This draft European Standard is submitted to CENELEC members for enquiry.
Deadline for CENELEC: 2024-05-24.
It has been drawn up by CLC/TC 21X.
If this draft becomes a European Standard, CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CENELEC in three official versions (English, French, German).
A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to
the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Project: 77886 Ref. No. prEN 50342-5:2024 E
---------------------- Page: 3 ----------------------
oSIST prEN 50342-5:2024
prEN 50342-5:2024 (E)
Contents Page
1 European foreword . 3
2 1 Scope . 4
3 2 Normative references . 4
4 3 Terms and definitions . 4
5 4 Properties of raw materials. 5
6 4.1 General . 5
7 4.2 Resistance against chemical substances . 5
8 5 Production of battery housings . 6
9 5.1 General . 6
10 5.2 Test on disruptive strength . 6
11 5.3 Warm storage .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.