IEC TR 62914:2014 identifies experimental procedures for the forced internal short-circuit tests in terms of designation, dimensions, tests and requirements. This technical report provides supplemental information to perform the forced internal short-circuit test of IEC 62133:2012 (Subclause 8.3.9).

    • sale 15% off
    • Technical report
      11 pages
      English language

IEC-63115-2:2021 specifies designations, tests and requirements for the safe operation of sealed nickel-metal hydride cells and batteries used in industrial applications excluding road vehicles. Since this document covers batteries for various industrial applications, it includes those requirements which are common and minimum to the various applications.

    • sale 10% off
    • Standard
      26 pages
      English language
    • e-Library read for
      1 day

IEC 62485-6:2021 applies to battery installations used for electric off-road vehicles; it does not cover the design of such vehicles.
Examples of the main applications are:
- industrial
• cleaning machines,
• trucks for material handling, for example, lift trucks, tow trucks, automatic guided vehicles,
• electrically propulsed lifting platforms;
- other applications
• electric powered boats and ships.

    • sale 10% off
    • Standard
      27 pages
      English language
    • e-Library read for
      1 day

This part of IEC 62485 applies to the installation of one or more stationary secondary
batteries having a maximum aggregate DC voltage of 1 500 V to any DC part of the power
network, and describes the principal measures for protections during normal operation or
under expected fault conditions against hazards generated from:
– electricity,
– short-circuits,
– electrolyte,
– gas emission,
– fire,
– explosion.
This document provides requirements on safety aspects associated with the inst...
view more

    • sale 10% off
    • Standard
      42 pages
      English language
    • e-Library read for
      1 day

This document specifies requirements and tests for the product safety of secondary lithium
cells and batteries used in electrical energy storage systems (Figure 2) with a maximum DC
voltage of 1 500 V (nominal).
Basic safety requirements for the secondary lithium cells and batteries used in industrial
applications are included in IEC 62619. This document provides additional or specific
requirements for electrical energy storage systems.
Since this document covers batteries for various elec...
view more

    • sale 10% off
    • Standard
      21 pages
      English language
    • e-Library read for
      1 day

This document specifies safety tests and requirements for secondary lithium batteries
permanently installed in road vehicles not for the propulsion. Replacement secondary
batteries permanently installed in road vehicles not for propulsion are covered by this
document.
The following are typical applications that utilize the batteries under the scope of this
document: a power source for the starting of internal combustion engines, lighting, on-board
auxiliary equipment, and energy absorption...
view more

    • sale 10% off
    • Standard
      24 pages
      English language
    • e-Library read for
      1 day

IEC 62485-6:2021 applies to battery installations used for electric off-road vehicles; it does not cover the design of such vehicles.
Examples of the main applications are:
- industrial
• cleaning machines,
• trucks for material handling, for example, lift trucks, tow trucks, automatic guided vehicles,
• electrically propulsed lifting platforms;
- other applications
• electric powered boats and ships.

    • sale 15% off
    • Standard
      47 pages
      English and French language

IEC-63115-2:2021 specifies designations, tests and requirements for the safe operation of sealed nickel-metal hydride cells and batteries used in industrial applications excluding road vehicles.
Since this document covers batteries for various industrial applications, it includes those requirements which are common and minimum to the various applications.

    • sale 15% off
    • Standard
      46 pages
      English and French language

IEC 62485-5:2020 applies to the installation of one or more stationary secondary batteries having a maximum aggregate DC voltage of 1 500 V to any DC part of the power network, and describes the principal measures for protections during normal operation or under expected fault conditions against hazards generated from:
– electricity,
– short-circuits,
– electrolyte,
– gas emission,
– fire,
– explosion.
This document provides requirements on safety aspects associated with the installation,...
view more

    • sale 15% off
    • Standard
      76 pages
      English and French language

This part of IEC 61960 specifies performance tests, designations, markings, dimensions and
other requirements for coin secondary lithium cells and batteries for portable applications and
backup power supply such as memory backup applications.
The objective of this document is to provide the purchasers and users of coin secondary lithium
cells and batteries with a set of criteria with which they can assess the performance of coin
secondary lithium cells and batteries offered by various manuf...
view more

    • sale 10% off
    • Standard
      19 pages
      English language
    • e-Library read for
      1 day

EN-IEC 63115-1 specifies the marking, designation, tests and requirements for sealednickelmetalhydride cells and batteries used in industrial applications, including stationaryapplications. When an IEC International Standard specifying test conditions and requirements for cellsused in special applications is in conflict with this document, the former takes precedence (e.g.IEC 62675).The following are some examples of applications that utilize the cells and batteries fallingunder the scope of thi...view more

    • sale 10% off
    • Standard
      31 pages
      English language
    • e-Library read for
      1 day

IEC 63056:2020 specifies requirements and tests for the product safety of secondary lithium cells and batteries used in electrical energy storage systems (Figure 2) with a maximum DC voltage of 1 500 V (nominal).
Basic safety requirements for the secondary lithium cells and batteries used in industrial applications are included in IEC 62619. This document provides additional or specific requirements for electrical energy storage systems.
Since this document covers batteries for various electri...
view more

    • sale 15% off
    • Standard
      37 pages
      English and French language

IEC 63115-1:2020 specifies the marking, designation, tests and requirements for sealed nickel­metal hydride cells and batteries used in industrial applications, including stationary applications. When an IEC International Standard specifying test conditions and requirements for cells used in special applications is in conflict with this document, the former takes precedence (e.g. IEC 62675). The following are some examples of applications that utilize the cells and batteries falling under the sc...view more

    • sale 10% off
    • Standard
      31 pages
      English language
    • e-Library read for
      1 day

IEC 63057:2020 specifies safety tests and requirements for secondary lithium batteries permanently installed in road vehicles not for the propulsion. Replacement secondary batteries permanently installed in road vehicles not for propulsion are covered by this document. The following are typical applications that utilize the batteries under the scope of this document: a power source for the starting of internal combustion engines, lighting, on-board auxiliary equipment, and energy absorption for ...view more

    • sale 10% off
    • Standard
      24 pages
      English language
    • e-Library read for
      1 day

IEC 63115-1:2020 specifies the marking, designation, tests and requirements for sealed nickel­metal hydride cells and batteries used in industrial applications, including stationary applications.
When an IEC International Standard specifying test conditions and requirements for cells used in special applications is in conflict with this document, the former takes precedence (e.g. IEC 62675).
The following are some examples of applications that utilize the cells and batteries falling under the ...
view more

    • sale 15% off
    • Standard
      56 pages
      English and French language

IEC 63057:2020 specifies safety tests and requirements for secondary lithium batteries permanently installed in road vehicles not for the propulsion. Replacement secondary batteries permanently installed in road vehicles not for propulsion are covered by this document.
The following are typical applications that utilize the batteries under the scope of this document: a power source for the starting of internal combustion engines, lighting, on-board auxiliary equipment, and energy absorption for...
view more

    • sale 15% off
    • Standard
      42 pages
      English and French language

This document specifies methods for the clear identification of secondary cells, batteries, battery modules and monoblocs according to their chemistry (electrochemical storage technology). The markings described in this document are applicable for secondary cells, batteries, battery modules and monoblocs with a volume of more than 900 cm3. The marking of the chemistry is useful for the installation, operation and decommissioning phases of battery life. Many recycling processes are chemistry spec...view more

    • sale 10% off
    • Standard
      21 pages
      English language
    • e-Library read for
      1 day

IEC 62902:2019 specifies methods for the clear identification of secondary cells, batteries, battery modules and monoblocs according to their chemistry (electrochemical storage technology).
The markings described in this document are applicable for secondary cells, batteries, battery modules and monoblocs with a volume of more than 900 cm3.
The marking of the chemistry is useful for the installation, operation and decommissioning phases of battery life.
Many recycling processes are chemistry ...
view more

    • sale 15% off
    • Standard
      37 pages
      English and French language

IEC 62899-501-1:2019(E) specifies failure modes and mechanical stress test methods for the determination of reliability characteristics of bendable or flexible printed primary cells and secondary cells and batteries as defined in IEC 60050-482:2004, 482-01-01, IEC 60050‑482:2004, 482-01-02, IEC 60050-482:2004, 482-01-03, IEC 60050-482:2004, 482‑01-04 and IEC 60050-482:2004, 482-01-05, respectively.
Important parameters and specifications for primary cells are mentioned in IEC 60086-1 and IEC 60...
view more

    • sale 15% off
    • Standard
      15 pages
      English language

This Part of IEC 62485 applies to the safety aspects associated with the accommodation, the
arrangements of circuits and the operation of secondary valve-regulated lead-acid cells and
batteries in portable appliances. Requirements are specified which oblige the manufacturers
of appliances and secondary batteries to prevent the misuse of batteries in the course of
operation to provide protective measures avoiding injury to persons in case of battery failure
and to provide sufficient informat...
view more

    • sale 10% off
    • Standard
      16 pages
      English language
    • e-Library read for
      1 day

This Part of IEC 62485 specifies the basic requirements for secondary batteries and battery
installations.
The requirements regarding safety, reliability, life expectancy, mechanical strength, cycle
stability, internal resistance, and battery temperature, are determined by various applications,
and this, in turn, determines the selection of the battery design and technology.
In general, the requirements and definitions are specified for lead-acid and nickel-cadmium
batteries. For other bat...
view more

    • sale 10% off
    • Standard
      22 pages
      English language
    • e-Library read for
      1 day

This part of the IEC 62485 applies to stationary secondary batteries and battery installations
with a maximum voltage of DC 1 500 V (nominal) and describes the principal measures for
protections against hazards generated from:
– electricity,
– gas emission,
– electrolyte.
This International Standard provides requirements on safety aspects associated with the
erection, use, inspection, maintenance and disposal.
It covers lead-acid and NiCd / NiMH batteries.
Examples for the main applicat...
view more

    • sale 10% off
    • Standard
      41 pages
      English language
    • e-Library read for
      1 day

IEC 62485-2:2010 applies to stationary secondary batteries and battery installations with a maximum voltage of DC 1 500 V (nominal) and describes the principal measures for protections against hazards generated from: - electricity, - gas emission, - electrolyte. This International Standard provides requirements on safety aspects associated with the erection, use, inspection, maintenance and disposal. It covers lead-acid and NiCd/NiMH batteries.

    • sale 10% off
    • Standard
      41 pages
      English language
    • e-Library read for
      1 day

IEC 62485-4:2015 applies to the safety aspects associated with the accommodation, the arrangements of circuits and the operation of secondary valve-regulated lead-acid cells and batteries in portable appliances. Requirements are specified which oblige the manufacturers of appliances and secondary batteries to prevent the misuse of batteries in the course of operation to provide protective measures avoiding injury to persons in case of battery failure and to provide sufficient information to user...view more

    • sale 10% off
    • Standard
      16 pages
      English language
    • e-Library read for
      1 day

IEC 62485-1:2015 specifies the basic requirements for secondary batteries and battery installations. The requirements regarding safety, reliability, life expectancy, mechanical strength, cycle stability, internal resistance, and battery temperature, are determined by various applications, and this, in turn, determines the selection of the battery design and technology. In general, the requirements and definitions are specified for lead-acid and nickel-cadmium batteries. For other battery systems...view more

    • sale 10% off
    • Standard
      22 pages
      English language
    • e-Library read for
      1 day

IEC 61951-1:2013 specifies marking, designation, dimensions, tests and requirements for portable sealed nickel-cadmium small prismatic, cylindrical and button rechargeable single cells, suitable for use in any orientation. This third edition cancels and replaces the second edition (2003) and its amendment 1 (2005) of which it constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:   - addition of several new cell s...view more

    • sale 10% off
    • Standard
      43 pages
      English language
    • e-Library read for
      1 day

This part of IEC 62133 specifies requirements and tests for the safe operation of portable
sealed secondary nickel cells and batteries containing alkaline electrolyte, under intended use
and reasonably foreseeable misuse.

    • sale 10% off
    • Standard
      25 pages
      English language
    • e-Library read for
      1 day

This document specifies requirements and tests for the safe operation of secondary lithium
cells and batteries used in industrial applications including stationary applications.
When there exists an IEC standard specifying test conditions and requirements for cells used
in special applications and which is in conflict with this document, the former takes
precedence (e.g., IEC 62660 series on road vehicles).
The following are some examples of applications that utilize cells and batteries und...
view more

    • sale 10% off
    • Standard
      33 pages
      English language
    • e-Library read for
      1 day

This part of IEC 63005 describes basic requirements for event video data recorders (EVDRs)
for road vehicle accidents, used for identifying and analysing causes of accidents based on
video from a front-mounted camera and other information obtained before and after such
events. In addition to video from a front-mounted camera and vehicle behaviour, these
products can record side and/or rear video data for enhanced functionalities in determining
causes of accidents and analysing collision eve...
view more

    • sale 10% off
    • Standard
      25 pages
      English language
    • e-Library read for
      1 day

This part of IEC 62133 specifies requirements and tests for the safe operation of portable
sealed secondary lithium cells and batteries containing non-acid electrolyte, under intended
use and reasonably foreseeable misuse.

    • sale 10% off
    • Standard
      50 pages
      English language
    • e-Library read for
      1 day

IEC 61951-2:2011 specifies marking, designation, dimensions, tests and requirements for portable sealed nickel-metal hydride, small prismatic, cylindrical and button rechargeable single cells, suitable for use in any orientation. This third edition cancels and replaces the second edition published in 2003 of which it constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:  - clause 4: addition of 2 parameters;   - ...view more

    • sale 10% off
    • Standard
      48 pages
      English language
    • e-Library read for
      1 day

IEC 61951-2:2011 specifies marking, designation, dimensions, tests and requirements for portable sealed nickel-metal hydride, small prismatic, cylindrical and button rechargeable single cells, suitable for use in any orientation. This third edition cancels and replaces the second edition published in 2003 of which it constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - clause 4: addition of 2 parameters; - cla...view more

    • sale 10% off
    • Standard
      48 pages
      English language
    • e-Library read for
      1 day

IEC 60623 specifies marking, designation, dimensions, tests and requirements for vented
nickel-cadmium prismatic secondary single cells.
NOTE In this context, "prismatic" refers to cells having rectangular sides and base.
When there exists an IEC standard specifying test conditions and requirements for cells used
in special applications and which is in conflict with this document, the former takes
precedence.

    • sale 10% off
    • Standard
      27 pages
      English language
    • e-Library read for
      1 day

IEC 62619:2017 specifies requirements and tests for the safe operation of secondary lithium cells and batteries used in industrial applications including stationary applications. When there exists an IEC standard specifying test conditions and requirements for cells used in special applications and which is in conflict with this document, the former takes precedence (e.g., IEC 62660 series on road vehicles). The following are some examples of applications that utilize cells and batteries under t...view more

    • sale 10% off
    • Standard
      33 pages
      English language
    • e-Library read for
      1 day

IEC 61951-1:2013 specifies marking, designation, dimensions, tests and requirements for portable sealed nickel-cadmium small prismatic, cylindrical and button rechargeable single cells, suitable for use in any orientation. This third edition cancels and replaces the second edition (2003) and its amendment 1 (2005) of which it constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - addition of several new cell siz...view more

    • sale 10% off
    • Standard
      43 pages
      English language
    • e-Library read for
      1 day

IEC 62133-1:2017 specifies requirements and tests for the safe operation of portable sealed secondary nickel cells and batteries containing alkaline electrolyte, under intended use and reasonably foreseeable misuse. This first edition cancels and replaces the second edition of IEC 62133 published in 2012. It constitutes a technical revision. This edition includes the following significant technical changes with respect to IEC 62133:2012: - separation of lithium systems into a separate Part 2; - ...view more

    • sale 10% off
    • Standard
      25 pages
      English language
    • e-Library read for
      1 day

IEC 62133-2:2017 specifies requirements and tests for the safe operation of portable sealed secondary lithium cells and batteries containing non-acid electrolyte, under intended use and reasonably foreseeable misuse. This first edition cancels and replaces the second edition of IEC 62133 published in 2012. It constitutes a technical revision. This edition includes the following significant technical changes with respect to IEC 62133:2012: - separation of nickel systems into a separate Part 1; - ...view more

    • sale 10% off
    • Standard
      50 pages
      English language
    • e-Library read for
      1 day

IEC 61951-2:2017 is also available as IEC 61951-2:2017 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 61951-2:2017 specifies marking, designation, dimensions, tests and requirements for secondary sealed nickel-metal hydride small prismatic, cylindrical and button cells and batteries, suitable for use in any orientation, for portable applications.
This edition includes the following sign...
view more

    • sale 15% off
    • Standard
      89 pages
      English and French language

IEC 61951-1:2017 specifies marking, designation, dimensions, tests and requirements for secondary sealed nickel-cadmium small prismatic, cylindrical and button cells and batteries, suitable for use in any orientation, for portable applications.
This edition includes the following significant technical changes with respect to the previous edition:
- addition of battery type;
- revision of Figure 3 (6.1.3.1);
- addition of “Optional pip” note to positive contact;
- changed leader line positio...
view more

    • sale 15% off
    • Standard
      81 pages
      English and French language

IEC 62619:2017 specifies requirements and tests for the safe operation of secondary lithium cells and batteries used in industrial applications including stationary applications.
When there exists an IEC standard specifying test conditions and requirements for cells used in special applications and which is in conflict with this document, the former takes precedence (e.g., IEC 62660 series on road vehicles).
The following are some examples of applications that utilize cells and batteries under...
view more

    • sale 15% off
    • Standard
      61 pages
      English and French language

IEC 62133-1:2017 specifies requirements and tests for the safe operation of portable sealed secondary nickel cells and batteries containing alkaline electrolyte, under intended use and reasonably foreseeable misuse.
This first edition cancels and replaces the second edition of IEC 62133 published in 2012. It constitutes a technical revision.
This edition includes the following significant technical changes with respect to IEC 62133:2012:
- separation of lithium systems into a separate Part 2;...
view more

    • sale 15% off
    • Standard
      44 pages
      English and French language

IEC 62133-2:2017 specifies requirements and tests for the safe operation of portable sealed secondary lithium cells and batteries containing non-acid electrolyte, under intended use and reasonably foreseeable misuse.
This first edition cancels and replaces the second edition of IEC 62133 published in 2012. It constitutes a technical revision.
This edition includes the following significant technical changes with respect to IEC 62133:2012:
- separation of nickel systems into a separate Part 1;...
view more

    • sale 15% off
    • Standard
      94 pages
      English and French language

This standard specifies test methods and requirements for secondary lithium batteries and its interface with an appropriate charging system for the safe use in EPACs.
This standard does not apply to performance and functional characteristics of batteries.
This standard refers to the UN Recommendations on the Transport of Dangerous Goods - Manual of Tests and Criteria: Section 38.3 which are performed independently from this testing program. Test reports issued by an ILAC, APLAC or similar accr...
view more

    • sale 10% off
    • Standard
      45 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies test procedures and provides acceptable safety requirements for voltage class A and voltage class B removable lithium-ion battery (packs and) systems, to be used as traction batteries of or for electrically propelled road vehicles. This European Standard is related to the testing of safety performance of battery packs and systems for their intended use for a vehicle. This European Standard is not intended to be applied for the evaluation of the safety of battery ...view more

    • sale 10% off
    • Standard
      45 pages
      English language
    • e-Library read for
      1 day

IEC 62485-1:2015 specifies the basic requirements for secondary batteries and battery installations. The requirements regarding safety, reliability, life expectancy, mechanical strength, cycle stability, internal resistance, and battery temperature, are determined by various applications, and this, in turn, determines the selection of the battery design and technology. In general, the requirements and definitions are specified for lead-acid and nickel-cadmium batteries. For other battery systems...view more

    • sale 15% off
    • Standard
      38 pages
      English and French language

This International Standard specifies marking, tests and requirements for lithium secondary
cells and batteries used in industrial applications including stationary applications.
When there exists an IEC standard specifying test conditions and requirements for cells used
in special applications and which is in conflict with this standard, the former takes precedence.
(e.g. IEC 62660 series on road vehicles).
The following are some examples of applications that utilize the cells and batterie...
view more

    • sale 10% off
    • Standard
      30 pages
      English language
    • e-Library read for
      1 day

IEC 62485-4:2015 applies to the safety aspects associated with the accommodation, the arrangements of circuits and the operation of secondary valve-regulated lead-acid cells and batteries in portable appliances. Requirements are specified which oblige the manufacturers of appliances and secondary batteries to prevent the misuse of batteries in the course of operation to provide protective measures avoiding injury to persons in case of battery failure and to provide sufficient information to user...view more

    • sale 15% off
    • Standard
      25 pages
      English and French language

IEC 62620:2014 specifies marking, tests and requirements for lithium secondary cells and batteries used in industrial applications including stationary applications. When there exists an IEC standard specifying test conditions and requirements for cells used in special applications and which is in conflict with this standard, the former takes precedence. (e.g. IEC 62660 series on road vehicles). The following are some examples of applications that utilize the cells and batteries under the scope ...view more

    • sale 10% off
    • Standard
      30 pages
      English language
    • e-Library read for
      1 day

IEC 62620:2014 specifies marking, tests and requirements for lithium secondary cells and batteries used in industrial applications including stationary applications. When there exists an IEC standard specifying test conditions and requirements for cells used in special applications and which is in conflict with this standard, the former takes precedence. (e.g. IEC 62660 series on road vehicles). The following are some examples of applications that utilize the cells and batteries under the scope ...view more

    • sale 15% off
    • Standard
      54 pages
      English and French language

IEC 62485-3:2014 applies to secondary batteries and battery installations used for electric vehicles, e.g. in electric industrial trucks (including lift trucks, tow trucks, cleaning machines, automatic guided vehicles), in battery powered locomotives, in electric vehicles (e.g. goods vehicles, golf carts, bicycles, wheelchairs), and does not cover the design of such vehicles. It provides requirements on safety aspects associated with the installation, use, inspection, maintenance and disposal of...view more

    • sale 10% off
    • Standard
      25 pages
      English language
    • e-Library read for
      1 day