EN 60603-7-3:2009

Connectors for electronic equipment - Part 7-3: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 100 MHz

Covers 8-way shielded free and fixed connectors and specifies mechanical and environmental requirements and electrical transmission requirements for frequencies up to 100 MHz. These connectors are typically used as category 5 connectors in class D cabling systems specified in ISO/IEC 11801:2002.

Steckverbinder für elektronische Einrichtungen - Teil 7-3: Bauartspezifikation für geschirmte freie und feste Steckverbinder, 8polig, für Datenübertragungen bis 100 MHz

Connecteurs pour équipements électroniques - Partie 7-3: Spécification particulière pour les fiches et les embases blindées à 8 voies pour la transmission de données à des fréquences jusqu'à 100 MHz

Couvre les fiches et les embases blindées à 8 voies et spécifie les exigences mécaniques et environnementales ainsi que les exigences de transmission électrique pour des fréquences jusqu'à 100 MHz. Ces connecteurs sont normalement utilisés comme connecteurs de catégorie 5 dans les systèmes de câblage de classe D spécifiés dans l'ISO/CEI 11801:2002.

Konektorji za elektronsko opremo - 7-3. del: Podrobna specifikacija za 8-redne, zaslonjene, proste in fiksne konektorje za prenos podatkov s frekvencami do 100 MHz (IEC 60603-7-3:2008)

Ta del IEC 60603 zajema 8-redne zaslonjene proste in fiksne konektorje ter določa mehanske in okoljske zahteve ter zahteve za prevajanje električnega toka za frekvence do 100 MHz. Ti konektorji se praviloma uporabljajo kot konektorji kategorije 5 v kabelskih sistemih razreda D, ki jih opredeljuje ISO/IEC 11801:2002. Ti konektorji so medsebojno združljivi, interoperabilni in vzvratno združljivi z drugimi konektorji serije IEC 60603-7. Definicijo interoperabilnosti obravnava IEC, v tem standardu pa »interoperabilen« pomeni naslednje: fiksni in prosti konektor se lahko poveže s katerim koli konektorjem serije IEC 60603-7 in pri takšni povezavi v vseh pogledih izpolnjuje zahteve standarda serije IEC 60603-7 za nižje frekvence. OPOMBA Kategorije zmogljivosti prevajanja: V tem standardu IEC se izraz »kategorija« v zvezi z zmogljivostjo prevajanja nanaša na kategorije, opredeljene v ISO/IEC 11801:2002.

General Information

• Status: Withdrawn
• Publication Date: 18-Nov-2009
• Withdrawal Date: 31-Aug-2012
• ICS: 31.220.10 - Plug-and-socket devices. Connectors
• Technical Committee: CLC/SR 48B - Connectors
• Drafting Committee: IEC/SC 48B - IEC_SC_48B
• Parallel Committee: IEC/SC 48B - IEC_SC_48B
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 01-Jul-2013
• Completion Date: 01-Jul-2013
• Ref Project: SIST EN 60603-7-3:2010 - Connectors for electronic equipment - Part 7-3: Detail specification for 8-way, shielded, free and fixed connectors, for data transmission with frequencies up to 100 MHz (IEC 60603-7-3:2008)

Relations

• Replaced By: EN 60603-7-3:2010 - Connectors for electronic equipment - Part 7-3: Detail specification for 8-way, shielded, free and fixed connectors, for data transmission with frequencies up to 100 MHz
• Effective Date: 29-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60603-7-3:2010
01-januar-2010
1DGRPHãþD
kSIST FprEN 60603-7-3:2009
Konektorji za elektronsko opremo - 7-3. del: Podrobna specifikacija za 8-redne,
zaslonjene, proste in fiksne konektorje za prenos podatkov s frekvencami do 100
MHz (IEC 60603-7-3:2008)
Connectors for electronic equipment - Part 7-3: Detail specification for 8-way, shielded,
free and fixed connectors, for data transmission with frequencies up to 100 MHz (IEC
60603-7-3:2008)
Steckverbinder für elektronische Einrichtungen - Teil 7-3: Bauartspezifikation für
geschirmte freie und feste Steckverbinder, 8polig, für Datenübertragungen bis 100 MHz
(IEC 60603-7-3:2008)
Connecteurs pour équipements électroniques - Partie 7-3: Spécification particulière pour
les fiches et les embases blindées à 8 voies pour la transmission de données à des
fréquences jusqu'à 100 MHz (CEI 60603-7-3:2008)
Ta slovenski standard je istoveten z: EN 60603-7-3:2009
ICS:
31.220.10 9WLþLLQYWLþQLFHNRQHNWRUML Plug-and-socket devices.
Connectors
SIST EN 60603-7-3:2010 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60603-7-3:2010

---------------------- Page: 2 ----------------------

SIST EN 60603-7-3:2010

EUROPEAN STANDARD
EN 60603-7-3

NORME EUROPÉENNE
November 2009
EUROPÄISCHE NORM

ICS 31.220.10


English version


Connectors for electronic equipment -
Part 7-3: Detail specification for 8-way, shielded,
free and fixed connectors, for data transmissions
with frequencies up to 100 MHz
(IEC 60603-7-3:2008)


Connecteurs pour équipements Steckverbinder für elektronische
électroniques - Einrichtungen -
Partie 7-3: Spécification particulière Teil 7-3: Bauartspezifikation
pour les fiches et les embases für geschirmte freie und feste
blindées à 8 voies Steckverbinder, 8polig,
pour la transmission de données für Datenübertragungen bis 100 MHz
à des fréquences jusqu'à 100 MHz (IEC 60603-7-3:2008)
(CEI 60603-7-3:2008)




This European Standard was approved by CENELEC on 2009-09-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: Avenue Marnix 17, B - 1000 Brussels


© 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60603-7-3:2009 E

---------------------- Page: 3 ----------------------

SIST EN 60603-7-3:2010
EN 60603-7-3:2009 – 2 –
Foreword
The text of document 48B/1816/FDIS, future edition 1 of IEC 60603-7-3, prepared by SC 48B,
Connectors, of IEC TC 48, Electromechanical components and mechanical structures for electronic
equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as
EN 60603-7-3 on 2009-09-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2010-06-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2012-09-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60603-7-3:2008 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60068-2-14 NOTE  Harmonized as EN 60068-2-14:2009 (not modified).
IEC 60603-7-2 NOTE  Harmonized as EN 60603-7-2:2009 (not modified).
__________

---------------------- Page: 4 ----------------------

SIST EN 60603-7-3:2010
– 3 – EN 60603-7-3:2009

Annex ZA
(normative)

Normative references to international publications
with their correspondin
...