iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

EN 61834-2:1998

(Main)

Recording - Helical-scan digital video cassette recording system using 6,35 mm magnetic tape for consumer use (525-60, 625-50, 1125-60 and 1250-50 systems) - Part 2: SD format for 525-60 and 625-50 systems

Recording - Helical-scan digital video cassette recording system using 6,35 mm magnetic tape for consumer use (525-60, 625-50, 1125-60 and 1250-50 systems) - Part 2: SD format for 525-60 and 625-50 systems

Specifies the content, format and recording method of the data blocks forming the helical records on the tape containing audio, video, and system data. It describes the specifications for the 525-line system with a frame frequency of 29,97 Hz and 625-line system with a frame frequency of 25,00 Hz. One video channel and two independent audio channels are recorded in the digital format.

Aufzeichnung - Videokassettensystem mit digitaler Schrägspuraufzeichnung auf Magnetband 6,35 mm für den Heimgebrauch (Systeme 525-60, 625-50, 1125-60 und 1250-50) - Teil 2: SD-Format für die Systeme 525-60 und 625-50

Enregistrement - Système de magnétoscope numérique à cassette à balayage hélicoïdal utilisant la bande magnétique de 6,35 mm, destiné au grand public (systèmes 525-60, 625-50, 1125-60 et 1250-50) - Partie 2: Format SD pour les systèmes 525-60 et 625-50

Spécifie le contenu, le format et la méthode d'enregistrement des paquets de données formant les enregistrements à balayage hélicoïdal sur les bandes comportant des données audio, vidéo et des données système. Décrit les spécifications du système 525 lignes doté d'une fréquence de trame de 29,97 Hz et du système 625 lignes doté d'une fréquence de trame de 25,00 Hz. Une voie vidéo et deux voies audio indépendantes sont enregistrées en format numériques.

Snemanje - Digitalni videokasetni snemalni sistem z zapisovanjem s poševnimi sledmi na magnetnem traku, širokem 6,35 mm, za splošno uporabo (sistemi 525-60, 625-50, 1125-60 in 1250-50) – 2. del: Format SD za sistema 525-60 in 625-50 (IEC 61834-2:1998)

General Information

Status
Published
Publication Date
08-Oct-1998
Withdrawal Date
30-Jun-2001
ICS
33.160.01 - Audio, video and audiovisual systems in general
Technical Committee
CLC/TC 100X - Audio, video and multimedia systems and equipment and related sub-systems
Drafting Committee
IEC/TC 100 - IEC_TC_100
Parallel Committee
IEC/TC 100 - IEC_TC_100
Current Stage
6060 - Document made available - Publishing
Start Date
09-Oct-1998
Completion Date
09-Oct-1998
Ref Project
SIST EN 61834-2:2005 - Recording - Helical-scan digital video cassette recording system using 6,35 mm magnetic tape for consumer use (525-60, 625-50, 1125-60 and 1250-50 systems) -- Part 2: SD format for 525-60 and 625-50 systems

Buy Standard

EN 61834-2:2005EN 61834-2:2005
PreviousNext
Standard
EN 61834-2:2005
English language
128 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61834-2:2005
01-januar-2005
Snemanje - Digitalni videokasetni snemalni sistem z zapisovanjem s poševnimi
sledmi na magnetnem traku, širokem 6,35 mm, za splošno uporabo (sistemi 525-
60, 625-50, 1125-60 in 1250-50) – 2. del: Format SD za sistema 525-60 in 625-50 (IEC
61834-2:1998)
Recording - Helical-scan digital video cassette recording system using 6,35 mm
magnetic tape for consumer use (525-60, 625-50, 1125-60 and 1250-50 systems) -- Part
2: SD format for 525-60 and 625-50 systems
Aufzeichnung - Videokassettensystem mit digitaler Schrägspuraufzeichnung auf
Magnetband 6,35 mm für den Heimgebrauch (Systeme 525-60, 625-50, 1125-60 und
1250-50) -- Teil 2: SD-Format für die Systeme 525-60 und 625-50
Enregistrement - Système de magnétoscope numérique à cassette à balayage hélicoïdal
utilisant la bande magnétique de 6,35 mm, destiné au grand public (systèmes 525-60,
625-50, 1125-60 et 1250-50) -- Partie 2: Format SD pour les systèmes 525-60 et 625-50
Ta slovenski standard je istoveten z: EN 61834-2:1998
ICS:
33.160.40 Video sistemi Video systems
SIST EN 61834-2:2005 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61834-2:2005

---------------------- Page: 2 ----------------------

SIST EN 61834-2:2005

---------------------- Page: 3 ----------------------

SIST EN 61834-2:2005

---------------------- Page: 4 ----------------------

SIST EN 61834-2:2005

---------------------- Page: 5 ----------------------

SIST EN 61834-2:2005

---------------------- Page: 6 ----------------------

SIST EN 61834-2:2005

---------------------- Page: 7 ----------------------

SIST EN 61834-2:2005

---------------------- Page: 8 ----------------------

SIST EN 61834-2:2005

---------------------- Page: 9 ----------------------

SIST EN 61834-2:2005

---------------------- Page: 10 ----------------------

SIST EN 61834-2:2005

---------------------- Page: 11 ----------------------

SIST EN 61834-2:2005

---------------------- Page: 12 ----------------------

SIST EN 61834-2:2005

---------------------- Page: 13 ----------------------

SIST EN 61834-2:2005

---------------------- Page: 14 ----------------------

SIST EN 61834-2:2005

---------------------- Page: 15 ----------------------

SIST EN 61834-2:2005

---------------------- Page: 16 ----------------------

SIST EN 61834-2:2005

---------------------- Page: 17 ----------------------

SIST EN 61834-2:2005

---------------------- Page: 18 ----------------------

SIST EN 61834-2:2005

---------------------- Page: 19 ----------------------

SIST EN 61834-2:2005

---------------------- Page: 20 ----------------------

SIST EN 61834-2:2005

---------------------- Page: 21 ----------------------

SIST EN 61834-2:2005

---------------------- Page: 22 ----------------------

SIST EN 61834-2:2005

---------------------- Page: 23 ----------------------

SIST EN 61834-2:2005

---------------------- Page: 24 ----------------------

SIST EN 61834-2:2005

---------------------- Page: 25 ----------------------

SIST EN 61834-2:2005

---------------------- Page: 26 ----------------------

SIST EN 61834-2:2005

---------------------- Page: 27 ----------------------

SIST EN 61834-2:2005

---------------------- Page: 28 ----------------------

SIST EN 61834-2:2005

---------------------- Page: 29 ----------------------

SIST EN 61834-2:2005

---------------------- Page: 30 ----------------------

SIST EN 61834-2:2005

---------------------- Page: 31 ----------------------

SIST EN 61834-2:2005

---------------------- Page: 32 ----------------------

SIST EN 61834-2:2005

---------------------- Page: 33 ----------------------

SIST EN 61834-2:2005

---------------------- Page: 34 ----------------------

SIST EN 61834-2:2005

---------------------- Page: 35 ----------------------

SIST EN 61834-2:2005

---------------------- Page: 36 ----------------------

SIST EN 61834-2:2005

---------------------- Page: 37 ----------------------

SIST EN 61834-2:2005

---------------------- Page: 38 ----------------------

SIST EN 61834-2:2005

---------------------- Page: 39 ----------------------

SIST EN 61834-2:2005

---------------------- Page: 40 ----------------------

SIST EN 61834-2:2005

---------------------- Page: 41 ----------------------

SIST EN 61834-2:2005

---------------------- Page: 42 ----------------------

SIST EN 61834-2:2005

---------------------- Page: 43 ----------------------

SIST EN 61834-2:2005

---------------------- Page: 44 ----------------------

SIST EN 61834-2:2005

---------------------- Page: 45 ----------------------

SIST EN 61834-2:2005

---------------------- Page: 46 ----------------------

SIST EN 61834-2:2005

---------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN IEC 60268-24:2024(Main)
Sound system equipment - Part 24: Headphones and earphones - Active acoustic noise cancelling characteristics
SIST EN IEC 60268-24:2024

IEC 60268-24:2023 is applicable to active acoustic noise-cancelling headphones and earphones which have the function of reducing the noise heard by the user by the output sound from the transducer generated by the environment noise detection microphone and the noise reduction signal processing circuit. This document specifies the terms and definitions of this type of headphones or earphones, the characteristics to be specified, and the measurement and evaluation methods. The noise detection microphone or microphones are mounted in the body, on the surface, or on an accessory of the headphones or earphones. Signal processing circuits are analogue and digital electronic circuits. This document does not deal with equipment intended for hearing protection. The noise cancelling characteristic measurement methods can be applied to headphones and earphones having no active noise cancelling function.

  • Draft
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60268-23:2023(Main)
Sound system equipment - Part 23: TVs and monitors - Loudspeaker systems
SIST EN IEC 60268-23:2023

IEC 60268-23:2023 specifies acoustical measurement methods that apply to TV sets, monitors with built-in loudspeakers, and other audio devices having similar acoustical properties (e.g. flat-panel loudspeakers). The acoustical measurements are performed under free-field conditions and in-situ. This document does not assess the perception and cognitive evaluation of the reproduced sound, nor the impact of perceived sound quality.

  • Standard
    68 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 63254:2022(Main)
Management and interfaces for WPT - Device-to-device wireless charging (D2DWC) for mobile devices with wireless power TX/RX module
SIST EN IEC 63254:2023

This standard defines specification and control protocol of D2DWC module for using wireless power TX and RX functions by only one single device. And the related antenna physical design examples are presented in Annex A for sharing information. This standard propose D2DWC module circuit requirement which are consisted with the D2DWC main AP, D2DWC IC, EMT/WPT Antenna Unit and PMIC unit. In the Chapter 5, ‘Specifications and control protocol of D2DWC’, the register information and message protocols for WPT control are defined in order to implement the WPT TX function. In this standard, the interface and protocol in the wireless power process of the mobile device can be used in accordance with the corresponding wireless power transfer standard. Any wireless power transfer standard working inside 100 - 350 kHz frequency range can be included from the scope of this standard. This standard can be used to mobile wireless power transfer in mobile phones and other mobile devices, IoT, and micro-sensor industries and related application fields.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60958-3:2021(Main)
Digital audio interface - Part 3: Consumer applications
SIST EN IEC 60958-3:2022

This part of IEC 60958 specifies the consumer application of the interface for the inter connection of digital audio equipment defined in IEC 60958-1. NOTE When used in a consumer digital processing environment, the interface is primarily intended to carry stereophonic programmes, with a resolution of up to 20 bits per sample, an extension to 24 bits per sample being possible.

  • Standard
    70 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60958-1:2021(Main)
Digital audio interface - Part 1: General
SIST EN IEC 60958-1:2022

IEC 60958-1:2021 is available as IEC 60958-1:2021 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition. IEC 60958-1:2021 describes a serial, uni-directional, self-clocking interface for the interconnection of digital audio equipment for consumer and professional applications. It provides the basic structure of the interface. Separate documents define items specific to particular applications. The interface is primarily intended to carry monophonic or stereophonic programmes, encoded using linear PCM and with a resolution of up to 24 bits per sample. When used for other purposes, the interface is able to carry audio data coded other than as linear PCM coded audio samples. Provision is also made to allow the interface to carry data related to computer software, multimedia technologies, or signals coded using non linear PCM. The format specification for these applications is not part of this document. The interface is intended for operation at audio sampling frequencies of 32 kHz and above. Auxiliary information is transmitted along with the programme. IEC 60958-1:2021c ancels and replaces the third edition published in 2008, and Amendment 1:2014. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) The relevant part of IEC 60958-5 is supported.

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60958-5:2021(Main)
Digital audio interface - Part 5: Consumer application enhancement
SIST EN IEC 60958-5:2021

IEC 60958-5:2021 enhances the consumer application of the interface for the interconnection of digital audio equipment defined in IEC 60958-1 and IEC 60958-3, introducing: - multichannel; - multi-stream; - high-resolution; - multimedia extension; - related applications.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60268-16:2020(Main)
Sound system equipment - Part 16: Objective rating of speech intelligibility by speech transmission index
SIST EN IEC 60268-16:2021

IEC 60268-16:2020 defines the STI model, test signals, measurement and prediction methods. The objective of this document is to provide a comprehensive manual for all types of users of the STI model in the fields of audio, communications and acoustics. This document does not provide STI criteria for certification of transmission channels (e.g. criteria for a voice-alarm system), but some typical application values are provided in Annex G. Every measurement method has limitations, and the reader is referred to clauses relating to limitations such as speech privacy, echo and systems using digital voice compression (vocoders). This document does not cover the case of fluctuating noise on the STI, although some general comments on dealing with this complex issue are provided in 7.13 and 8.9.3. IEC 60268-16:2020 cancels and replaces the fourth edition published in 2011. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) the spectrum of the male speech test signal has been changed, with significant reductions in the 125 Hz and 250 Hz bands being implemented; b) some corrections to formulae have been made; c) additional information has been included on prediction and measurement procedures; d) spectrum and weighting factors for female speech have been removed; e) verification information for STI measurement devices added; f) the relationships between STI and number of other speech intelligibility measures have been updated in Annex E; g) greater information is given in Annex M about adjustments to the measured STI results to simulate effects of alternative ambient noise and speech levels.

  • Standard
    111 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60268-22:2020(Main)
Sound system equipment - Part 22: Electrical and mechanical measurements on transducers
SIST EN IEC 60268-22:2021

IEC 60268-22:2020 applies to transducers converting an electrical input signal into a mechanical or acoustical output signal. However, if the electrical input terminals and the surface of the radiator are accessible, this document can also apply to passive and active sound systems such as loudspeakers, headphones, TV-sets, multi-media devices, personal portable audio devices, automotive sound systems and professional equipment. This document describes only electrical and mechanical measurements that help assess the transfer behaviour of the device under test (DUT). This includes operating the DUT in both the small- and large-signal domains. The influence of the target application's acoustical boundary conditions (e.g. car interior) can also be considered in the physical evaluation of the sound system. Perception and cognitive evaluations of the reproduced sound and the impact of perceived sound quality are outside the scope of this document.

  • Standard
    59 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60268-21:2018(Main)
Sound system equipment - Part 21: Acoustical (output-based) measurements
SIST EN IEC 60268-21:2019

IEC 60268-21:2018 specifies an acoustical measurement method that applies to electro-acoustical transducers and passive and active sound systems, such as loudspeakers, TV-sets, multi-media devices, personal portable audio devices, automotive sound systems and professional equipment. The device under test (DUT) can be comprised of electrical components performing analogue and digital signal processing prior to the passive actuators performing a transduction of the electrical input into an acoustical output signal. This document describes only physical measurements that assess the transfer behaviour of the DUT between an arbitrary analogue or digital input signal and the acoustical output at any point in the near and far field of the system. This includes operating the DUT in both the small and large signal domains. The influence of the acoustical boundary conditions of the target application (e.g. car interior) can also be considered in the physical evaluation of the sound system. This document does not assess the perception and cognitive evaluation of the reproduced sound and the impact of perceived sound quality.

  • Standard
    80 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61938:2018(Main)
Multimedia systems - Guide to the recommended characteristics of analogue interfaces to achieve interoperability
SIST EN IEC 61938:2019

NEW!IEC 61938:2018 is available as IEC 61938:2018 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 61938:2018 gives guidance on current practice for the characteristics of multimedia analogue interfaces to achieve interoperability between equipment from different manufacturers. It is not a performance standard. Recommendations for interfaces for equipment used in vehicles, and for analogue video interfaces for broadcast and similar equipment, are not given. Refer to IEC 60958 for the interconnection of digital signals. This third edition cancels and replaces the second edition published in 2013. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) electric tolerance is standardized; b) recommended value of output source impedance is adjusted; c) value of 6 Ohms is additionally recommended to impedance-defined loudspeaker systems; d) values in each table are chosen with respect to the state of the art and representative of best practice in industry.

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day