Multi-element metallic cables used in analogue and digital communications and control - Part 12-1: Sectional specification for screened cables characterised from 1 MHz up to 2 000 MHz - Horizontal and building backbone cables

EN 50288 12-1 is a sectional specification for screened cables, characterised up to 2 000 MHz, to be used in horizontal and building backbone wiring for information technology, generic-cabling systems. This sectional specification contains the electrical, mechanical, transmission and environmental performance characteristics and requirements of the cables when tested in accordance with the referenced test methods. This sectional specification is to be read in conjunction with EN 50288 1, which contains the essential provisions for its application. The cables covered in this sectional specification are intended to operate with voltages and currents normally encountered in communications systems. These cables are not intended to be used in conjunction with low impedance sources, for example the electrical power supplies of public utility mains.

Mehradrige metallische Daten- und Kontrollkabel für analoge und digitale Übertragung - Teil 12-1: Rahmenspezifikation für geschirmte Kabel für Frequenzen von 1 MHz bis 2 000 MHz - Kabel für Horizontal- und Steigbereich

Diese Rahmenspezifikation bezieht sich auf EN 50288-1, Mehradrige metallische Daten- und Kontrollkabel für analoge und digitale Übertragung. Sie behandelt geschirmte Kabel für Frequenzen bis zu 2 000 MHz, die in Rechenzentren, im Horizontal- und Steigbereich für Informationstechnik und in allgemeinen Verkabelungssystemen zu verwenden sind. Die elektrischen, mechanischen, übertragungstechnischen und umgebungsbedingten Leistungseigenschaften der Kabel sind bezüglich ihrer Referenzprüfverfahren detailliert aufgeführt. ANMERKUNG Mit Abwärtskompatibilität. Diese Rahmenspezifikation muss zusammen mit EN 50288-1 gelesen werden, die die wesentlichen Festlegungen für ihre Anwendung enthält.

Câbles métalliques à éléments multiples utilisés pour les transmissions et les commandes analogiques et numériques - Partie 12-1 : Spécification intermédiaire pour les câbles écrantés caractérisés de 1 MHz à 2 000 MHz - Câbles horizontaux et d’épine dorsale des bâtiments

Večelementni kovinski kabli za analogne in digitalne komunikacije in krmiljenje - 12-1. del: Področna specifikacija za zaslonjene kable z lastnostmi od 1 MHz do 2000 MHz - Vodoravni (etažni) in stavbni hrbtenični (medetažni) kabli

Ta področna specifikacija je povezana s standardom EN 50288 1, Večelementni kovinski kabli za analogne in digitalne komunikacije in krmiljenje.
Zajema zaslonjene kable, ki se lahko uporabljajo za pasovne širine do 2000 MHz v podatkovnih centrih ter vodoravnem (etažnem) in stavbnem hrbteničnem (medetažnem) ožičenju za splošne sisteme okablenja v informacijski tehnologiji.
Podrobno so opisane električne, mehanske, prenosne in okoljske lastnosti delovanja kablov v povezavi z njihovimi referenčnimi preskusnimi metodami.
OPOMBA   S povratno združljivostjo.
Ta področna specifikacija se uporablja skupaj s standardom EN 50288 1, ki vsebuje bistvene določbe za njeno uporabo.

General Information

Status
Published
Publication Date
24-Aug-2017
Withdrawal Date
29-May-2020
Current Stage
6060 - Document made available - Publishing
Start Date
25-Aug-2017
Due Date
25-Mar-2018
Completion Date
25-Aug-2017

Buy Standard

Standard
EN 50288-12-1:2017
English language
17 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN 50288-12-1:2017
English language
17 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 50288-12-1:2017
01-oktober-2017
9HþHOHPHQWQLNRYLQVNLNDEOL]DDQDORJQHLQGLJLWDOQHNRPXQLNDFLMHLQNUPLOMHQMH
GHO3RGURþQDVSHFLILNDFLMD]D]DVORQMHQHNDEOH]ODVWQRVWPLRG0+]GR
0+]9RGRUDYQL HWDåQL LQVWDYEQLKUEWHQLþQL PHGHWDåQL NDEOL
Multi-element metallic cables used in analogue and digital communications and control -
Part 12-1: Sectional specification for screened cables characterised from 1 MHz up to 2
000 MHz - Horizontal and building backbone cables
Câbles métalliques à éléments multiples utilisés pour les transmissions et les
commandes analogiques et numériques - Partie 2-1: Spécification intermédiaire pour les
câbles écrantés caractérisés de 1 MHz à 2 000 MHz - Câbles horizontaux et verticaux de
bâtiment
Ta slovenski standard je istoveten z: EN 50288-12-1:2017
ICS:
33.120.20 äLFHLQVLPHWULþQLNDEOL Wires and symmetrical
cables
SIST EN 50288-12-1:2017 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 50288-12-1:2017

---------------------- Page: 2 ----------------------

SIST EN 50288-12-1:2017

EUROPEAN STANDARD EN 50288-12-1

NORME EUROPÉENNE

EUROPÄISCHE NORM
August 2017
ICS 33.120.10
English Version
Multi-element metallic cables used in analogue and digital
communications and control - Part 12-1: Sectional specification
for screened cables characterised from 1 MHz up to 2 000 MHz -
Horizontal and building backbone cables
Câbles métalliques à éléments multiples utilisés pour les Mehradrige metallische Daten- und Kontrollkabel für
transmissions et les commandes analogiques et
analoge und digitale Übertragung - Teil 12-1:
numériques - Partie 2-1: Spécification intermédiaire pour les Rahmenspezifikation für geschirmte Kabel für Frequenzen
câbles écrantés caractérisés de 1 MHz à 2 000 MHz - von 1 MHz bis 2 000 MHz - Kabel für Horizontal- und
Câbles horizontaux et verticaux de bâtiment Steigbereich
This European Standard was approved by CENELEC on 2017-05-30. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.



European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 50288-12-1:2017 E

---------------------- Page: 3 ----------------------

SIST EN 50288-12-1:2017
EN 50288-12-1:2017
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms, definitions, symbols and abbreviations . 4
4 Cable construction . 4
4.1 Conductor . 4
4.2 Insulation . 4
4.3 Cabling elements . 4
...

SLOVENSKI STANDARD
oSIST prEN 50288-12-1:2017
01-januar-2017
9HþHOHPHQWQLNRYLQVNLNDEOL]DDQDORJQHLQGLJLWDOQHNRPXQLNDFLMHLQNUPLOMHQMH
GHO3RGURþQDVSHFLILNDFLMD]D]DVORQMHQHNDEOH]ODVWQRVWPLRG0+]GR
0+]9RGRUDYQL HWDåQL LQVWDYEQLKUEWHQLþQL PHGHWDåQL NDEOL
Multi-element metallic cables used in analogue and digital communications and control -
Part 12-1: Sectional specification for screened cables characterised from 1 MHz up to 2
000 MHz - Horizontal and building backbone cables
Câbles métalliques à éléments multiples utilisés pour les transmissions et les
commandes analogiques et numériques - Partie 2-1: Spécification intermédiaire pour les
câbles écrantés caractérisés de 1 MHz à 2 000 MHz - Câbles horizontaux et verticaux de
bâtiment
Ta slovenski standard je istoveten z: prEN 50288-12-1
ICS:
33.120.20 äLFHLQVLPHWULþQLNDEOL Wires and symmetrical
cables
oSIST prEN 50288-12-1:2017 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 50288-12-1:2017

---------------------- Page: 2 ----------------------
oSIST prEN 50288-12-1:2017

EUROPEAN STANDARD DRAFT
prEN 50288-12-1
NORME EUROPÉENNE

EUROPÄISCHE NORM

November 2016
ICS 33.120.10
English Version
Multi-element metallic cables used in analogue and digital
communications and control - Part 12-1: Sectional specification
for screened cables characterised from 1 MHz up to 2 000 MHz -
Horizontal and building backbone cables
Câbles métalliques à éléments multiples utilisés pour les To be completed
transmissions et les commandes analogiques et
numériques - Partie 2-1: Spécification intermédiaire pour les
câbles écrantés caractérisés de 1 MHz à 2 000 MHz -
Câbles horizontaux et verticaux de bâtiment
This draft European Standard is submitted to CENELEC members for enquiry.
Deadline for CENELEC: 2017-02-10.

It has been drawn up by CLC/SC 46XC.

If this draft becomes a European Standard, CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CENELEC in three official versions (English, French, German).
A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to
the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.



European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Project: 60177 Ref. No. prEN 50288-12-1 E

---------------------- Page: 3 ----------------------
oSIST prEN 50288-12-1:2017
prEN 50288-12-1:2016
4 Contents
5 European foreword 3
6 1 Scope 4
7 2 Normative references 4
8 3 Terms, definitions, symbols and abbreviations 4
9 4 Cable construction 4
10 4.1 Conductor . 4
11 4.2 Insulation . 4
12 4.3 Cabling elements . 4
13 4.4 Identification of cabling elements . 4
14 4.5 Screening of cabling elements . 5
15 4.6 Cable make-up . 5
16 4.7 Filling compound . 5
17
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.