EN 60255-5:2001

Electrical relays - Part 5: Insulation coordination for measuring relays and protection equipment - Requirements and tests

Lays down general requirements for the insulation coordination of measuring relays and protection equipment. Gives guidance for the selection of clearances and creepage distances and other aspects related to the insulation of measuring relays and protection equipment; specifies requirements for voltage tests and insulation resistance measurement.

Elektrische Relais - Teil 5: Isolationskoordination für Meßrelais und Schutzeinrichtungen - Anforderungen und Prüfungen

Relais électriques - Partie 5: Coordination de l'isolement des relais de mesure et des dispositifs de protection - Prescriptions et essais

Donne des prescriptions générales pour la coordination de l'isolement des relais de mesure et des dispositifs de protection. Fournit les directives pour la sélection des distances d'isolement et des lignes de fuite et d'autres aspects liés à l'isolation des relais de mesure et des dispositifs de protection; donne des prescriptions pour les essais de tension et la mesure de la résistance d'isolement.

Electrical relays - Part 5: Insulation coordination for measuring relays and protection equipment - Requirements and tests

General Information

• Status: Withdrawn
• Publication Date: 18-Apr-2001
• Withdrawal Date: 29-Feb-2004
• ICS: 29.120.70 - Relays
• Technical Committee: CLC/TC 95X - Measuring relays and protection equipment
• Drafting Committee: IEC/TC 95 - IEC_TC_95
• Parallel Committee: IEC/TC 95 - IEC_TC_95
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 19-Nov-2016
• Directive: 2006/95/EC - Directive 2006/95/EC of the European Parliament and of the Council of 12 December 2006 on the harmonisation of the laws of Member States relating to electrical equipment designed for use within certain voltage limits (codified version)
• Directive: 2014/35/EU - Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits
• Directive: 2014/53/EU - Directive 2014/53/EU of The European Parliament and of the Council of 16 April 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC
• Directive: 73/23/EEC - Electrical equipment designed for use within certain voltage limits
• Ref Project: SIST EN 60255-5:2002 - Electrical relays -- Part 5: Insulation coordination for measuring relays and protection equipment - Requirements and tests

Relations

• Replaced By: EN 60255-27:2014 - Measuring relays and protection equipment - Part 27: Product safety requirements
• Effective Date: 29-Jan-2023

Standards Content (Sample)

SLOVENSKI SIST EN 60255-5:2002
prva izdaja
STANDARD
julij 2002
Electrical relays - Part 5: Insulation coordination for measuring relays and protection
equipment - Requirements and tests
ICS 29.120.70 Referenčna številka
SIST EN 60255-5:2002(en)
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD EN 60255-5
NORME EUROPÉENNE
EUROPÄISCHE NORM April 2001
ICS 29.120.70
English version
Electrical relays
Part 5: Insulation coordination for measuring relays
and protection equipment -
Requirements and tests
(IEC 60255-5:2000)
Relais électriques Elektrische Relais
Partie 5: Coordination de l'isolement Teil 5: Isolationskoordination für
des relais de mesure et des dispositifs Meßrelais und Schutzeinrichtungen -
de protection - Anforderungen und Prüfungen
Prescriptions et essais (IEC 60255-5:2000)
(CEI 60255-5:2000)
This European Standard was approved by CENELEC on 2001-03-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway,
Portugal, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2001 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60255-5:2001 E

---------------------- Page: 2 ----------------------

EN 60255-5:2001 - 2 -
Foreword
The text of document 95/98/FDIS, future edition 2 of IEC 60255-5, prepared by IEC TC 95, Measuring
relays and protection equipment, was submitted to the IEC-CENELEC parallel vote and was approved
by CENELEC as EN 60255-5 on 2001-03-01.
This standard should be read in conjunction with HD 625.1 S1:1996.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2001-12-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2004-03-01
Annexes designated "normative" are part of the body of the standard.
Annexes designated "informative" are given for information only.
In this standard, annex ZA is normative and annexes A to D are informative.
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60255-5:2001 was approved by CENELEC as a European
Standard without any modification.
__________

---------------------- Page: 3 ----------------------

- 3 - EN 60255-5:2001
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions of any
of these publications apply to this European Standard only when incorporated in it by amendment or
revision. For undated references the latest edition of the publication referred to applies (including
amendments).
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
IEC 60050-151 1978 International Electrotechnical --
Vocabulary (IEV)
Chapter 151: Electrical and magnetic
devices
IEC 60050-448 1995 Chapter 448: Power system protection - -
IEC 60060-1 1989 High-voltage test techniques HD 588.1 S1 1991
+ corr. March 1990 Part 1: General definitions and test
requirements
IEC 60085 1984 Thermal evaluation and classification of HD 566 S1 1990
electrical insulation
IEC 60112 1979 Method for determining the comparative HD 214 S2 1980
and the proof tracking indices of solid
insulating materials under moist
conditions
IEC 60255 Series Electrical relays EN 60255 Series
IEC 60255-21-1 1988 Part 21: Vibration, shock, bump and EN 60255-21-1 1995
seismic tests on measu
...