EN 60836:2005

Specifications for unused silicone insulating liquids for electrotechnical purposes

Covers specifications and test methods for unused silicone liquid intended for use in transformers and other electrotechnical equipment. The specified characteristics of silicone transformer liquid Type 1 are described in Table 1. Other specifications will be added when required. NOTE Maintenance of used silicone liquid in electrotechnical equipment is covered in a separate publication EN 60944. This edition includes the following major technical changes with regard to the first edition: a) the title has been modified; b) the scope has been adapted to meet the changes in the title; c) health, safety and environmental requirements have been revised in order to follow the environmental practice carried out for other insulating liquids. Isopropyl alcohol now replaces chlorinated dissolvents for cleaning test equipment; d) Clause 8 replaces Section 2 of the first edition. In line with other TC10 documents, ISO 2592 is now the only method specified for measuring fire point and EN 60814 for water content. Breakdown voltage measurement has now been transferred to EN 60156; e) Table 1 replaces Sheet 1 of the first edition. Two technical changes have been made: - the minimum fire point is increased from 330 °C to 340 °C (in conformity with ASTM D4652) and recognizes also that the test values registered for production are even higher. - neutralization values have been reduced from 0,02 to 0,01 mg KOH/g, in line with production test data. f) Annex A has been deleted.

Anforderungen an ungebrauchte Silikonisolierflüssigkeiten für elektrotechnische Zwecke

Spécifications pour liquides isolants silicones neufs pour usages électrotechniques

Couvre les spécifications et les méthodes d'essai pour le liquide de silicone neuf prévu pour une utilisation dans les transformateurs et tout autre appareil électrotechnique. Les caractéristiques spécifiées du liquide de silicone de Type 1 pour transformateur sont décrites dans le Tableau 1. D'autres caractéristiques seront ajoutées lorsque demandé. NOTE L'entretien du liquide de silicone utilisé dans l'équipement électrotechnique est couvert dans une publication séparée, la EN 60944. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: a) le titre a été modifié; b) le domaine d'application a été adapté au changement de titre; c) les exigences relatives à l'hygiène, à la sécurité et à l'environnement ont été revues pour suivre la pratique environnementale appliquée pour d'autres liquides isolants. L'alcool d'isopropyle remplace maintenant les dissolvants chlorés pour le nettoyage des appareillages d'essai; d) l'Article 8 remplace la Section 2 de la première édition. En conformité avec d'autres documents du TC10, l'ISO 2592 est maintenant la seule méthode indiquée pour mesurer le point du feu et la EN 60814 pour la teneur en eau. La mesure de la tension de claquage est maintenant transférée dans la EN 60156; e) le Tableau 1 remplace la Feuille 1 de la première édition. Deux changements techniques ont été effectués: - le point minimal du feu est augmenté de 330 °C à 340 °C (conformément à la ASTM D4652) et prouve également que les valeurs d'essai de production enregistrées sont d'une plus haute précision. - des valeurs de neutralisation ont été réduites de 0,02 à 0,01 mg KOH/g, conformément aux données d'essais de production. f) l'Annexe A a été supprimée.

Specifikacije za nerabljene silikonske izolacijske tekočine za uporabo v elektrotehniki (IEC 60836:2005)

General Information

• Status: Withdrawn
• Publication Date: 07-Jul-2005
• Withdrawal Date: 31-May-2008
• ICS: 29.040.10 - Insulating oils
• Technical Committee: CLC/SR 10 - Fluids for electrotechnical applications
• Drafting Committee: IEC/TC 10 - IEC_TC_10
• Parallel Committee: IEC/TC 10 - IEC_TC_10
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 20-Aug-2018
• Completion Date: 20-Aug-2018
• Ref Project: SIST EN 60836:2005 - Specifications for unused silicone insulating liquids for electrotechnical purposes

Relations

• Replaces: HD 565 S1:1993 - Specifications for silicone liquids for electrical purposes
• Effective Date: 29-Jan-2023
• Replaced By: EN 60836:2015 - Specifications for unused silicone insulating liquids for electrotechnical purposes
• Effective Date: 29-Jan-2023

Standards Content (Sample)

SLOVENSKI SIST EN 60836:2005
STANDARD
december 2005
Specifikacije za nerabljene silikonske izolacijske tekočine za uporabo v
elektrotehniki (IEC 60836:2005)
Specifications for unused silicone insulating liquids for electrotechnical purposes
(IEC 60836:2005)
ICS 29.040.10 Referenčna številka
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

EUROPEAN STANDARD EN 60836
NORME EUROPÉENNE
EUROPÄISCHE NORM July 2005
ICS 29.040.10 Supersedes HD 565 S1:1993

English version
Specifications for unused silicone insulating liquids
for electrotechnical purposes
(IEC 60836:2005)
Spécifications pour liquides isolants Anforderungen an ungebrauchte
silicones neufs pour usages Silikonisolierflüssigkeiten für
électrotechniques elektrotechnische Zwecke
(CEI 60836:2005) (IEC 60836:2005)

This European Standard was approved by CENELEC on 2005-06-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden,
Switzerland and United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels

© 2005 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 60836:2005 E
Foreword
The text of document 10/619/FDIS, future edition 2 of IEC 60836, prepared by IEC TC 10, Fluids for
electrotechnical applications, was submitted to the IEC-CENELEC parallel vote and was approved by
CENELEC as EN 60836 on 2005-06-01.
This European Standard supersedes HD 565 S1:1993.
It includes the following major technical changes:
a) the title has been modified;
b) the scope has been adapted to meet the changes in the title;
c) health, safety and environmental requirements have been revised in order to follow the
environmental practice carried out for other insulating liquids. Isopropyl alcohol now replaces
chlorinated dissolvents for cleaning test equipment;
d) Clause 8 replaces Section 2 of HD 565 S1. In line with other TC 10 documents, EN ISO 2592
(ISO 2592, not modified) is now the only method specified for measuring fire point and EN 60814
(IEC 60814, not modified) for water content. Breakdown voltage measurement has now been
transferred to EN 60156 (IEC 60156, not modified);
e) Table 1 replaces Sheet 1 of HD 565 S1. Two technical changes have been made:
– the minimum fire point is increased from 330 °C to 340 °C (in conformity with ASTM D4652)
and recognizes also that the test values registered for production are even higher.
– neutralization values have been reduced from 0,02 mg KOH/g to 0,01 mg KOH/g, in line with
production test data.
f) Annex A has been deleted.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2006-03-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2008-06-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60836:2005 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 61039 NOTE Harmonized as HD 618 S1:1992 (not modified).
IEC 61100 NOTE Harmonized as EN 61100:1992 (not modified).
__________
- 3 - EN 60836:2005
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE Where an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
1) 2)
IEC 60156 - Insulating liquids - Determination of the EN 60156 1995
breakdown voltage at power frequency -
Test method
1) 2)
IEC 60247 - Insulating liquids - Measurement of EN 60247 2004
relative permittivity, dielectric dissipation
factor (tan d) and d.c. resistivity

1)
IEC 60475 - Method of sampling liquid dielectrics - -

1) 2)
IEC 60628 - Gassing of insulating liquids under HD 488 S1 1987
electrical stress and ionization

1) 2)
IEC 60814 - Insulating liquids - Oil-impregnated paper EN 60814 1997
and pressboard - Determination of water
by automatic coulometric Karl Fischer
titration
1)
IEC 60944 - Guide for maintenance of silicone - -
transformer liquids
1)
ISO 2211 - Liquid chemical products - -
Measurement of colour in Hazen units
(platinum-cobalt scale)
1)
ISO 2592 - Determination of flash and fire points - - -
Cleveland open cup method
1) 2)
ISO 2719 - Petroleum products and lubricants - EN 22719 1993
Determination of Flash Point Pensky-
Martens closed cup method
1)
ISO 3016 - Petroleum Oils - Determination of pour - -
point
1)
Undated reference.
2)
Valid edition at date of issue.

Publication Year Title EN/HD Year
1) 2)
ISO 3104 - Petroleum products - Transparent and EN ISO 3104 1996
opaque liquids - Determination of
kinematic viscosity and calculation of
dynamic viscosity
1) 2)
ISO 3675 - Crude petroleum and liquid petroleum EN ISO 3675 1998
products - Laboratory determination of
density - Hydrometermethod
1)
ISO 5661 - Petroleum products - Hydrocarbon liquids - -
- Determination of refractive index

NORME CEI
INTERNATIONALE
IEC
INTERNATIONAL
Deuxième édition
STANDARD
Second edition
2005-05
Spécification pour liquides isolants silicones
neufs pour usages électrotechniques

Specifications for unused silicone insulating
liquids for electrotechnical purposes

 IEC 2005 Droits de reproduction réservés  Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including
électronique ou mécanique, y compris la photocopie et les photocopying and microfilm, without permission in writing from
microfilms, sans l'accord écrit de l'éditeur. the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: [phone] Telefax: [phone] E-mail: [e-mail] Web: www.iec.ch
CODE PRIX
L
PRICE CODE
Commission Electrotechnique Internationale
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
Pour prix, voir catalogue en vigueur
For price, see current catalogue

60836  IEC:2005 – 3 –
CONTENTS
FOREWORD.5

1 Scope.9
2 Normative references.9
3 Terms and definitions .11
4 Properties.11
4.1 General properties.11
4.2 Properties relating to health, safety and environment (HSE) .11
5 General delivery requirements and identification. .13
6 Storage and maintenance.13
7 Sampling.13
8 Properties and test methods .13
8.1 Colour and appearance.13
8.2 Density.13
8.3 Kinematic viscosity.15
8.4 Flash point.15
8.5 Fire point.15
8.6 Refractive index.15
8.7 Pour-point.15
8.8 Water content.15
8.9 Neutralization value.15
8.10 Breakdown voltage .17
8.11 Dielectric dissipation factor, permittivity, d.c. resistivity .17
8.12 Gassing under electrical stress and ionization .17
8.13 Flammability.17
9 Individual specifications.17
9.1 Silicone transformer liquid Type T1 .17

60836  IEC:2005 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
___________
SPECIFICATIONS FOR UNUSED SILICONE INSULATING LIQUIDS
FOR ELECTROTECHNICAL PURPOSES
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible
...