29.040 - Insulating fluids
Insulating fluids
Werkstoffe der Elektrotechnik
Fluides isolants
Izolacijski fluidi
General Information
This document provides specifications and test methods for unused and recycled mineral
insulating oils (see Clause 3 for definitions). It applies to mineral oil delivered according to the
contractual agreement, intended for use in transformers, switchgear and similar electrical
equipment in which oil is required for insulation and heat transfer. Both unused oil and
recycled oil under the scope of this document have not been used in, nor been in contact with
electrical equipment or other equ...view more
- Standard45 pagesEnglish language
sale 10% off- e-Library read for1 day
IEC 60296:2020 provides specifications and test methods for unused and recycled mineral insulating oils. It applies to mineral oil delivered according to the contractual agreement, intended for use in transformers, switchgear and similar electrical equipment in which oil is required for insulation and heat transfer. Both unused oil and recycled oil under the scope of this document have not been used in, nor been in contact with electrical equipment or other equipment not required for manufacture...view more
- Standard82 pagesEnglish and French language
sale 15% off
This Standard defines requirements for the characterization of unused modified esters or blends of unused esters used as insulating liquids for electrotechnical applications. It does not cover liquids that contain any proportion of used liquids. The liquids covered by this document are intended mainly for transformer applications. Unused modified/synthetized esters are derived from a natural or synthetic base, or are blends of both. This document covers a variety of ester liquids not covered by ...view more
- Standard25 pagesEnglish language
sale 10% off- e-Library read for1 day
This document provides criteria for the re-use of sulphur hexafluoride (SF6) and its mixtures
after recovery and reclaiming from electrical equipment (e.g. for maintenance, at the end-oflife).
Sulphur hexafluoride (SF6), nitrogen (N2) and carbon tetrafluoride (CF4), are gases commonly
used for electrical equipment. Taking into account environmental concerns, particular
attention is paid to re-use criteria for SF6 and its mixtures with N2 and CF4 for its use in
electrical equipment. Procedur...view more
- Standard51 pagesEnglish language
sale 10% off- e-Library read for1 day
IEC 60312:2019 defines requirements for the characterization of unused modified esters or blends of unused esters used as insulating liquids for electrotechnical applications. It does not cover liquids that contain any proportion of used liquids. The liquids covered by this document are intended mainly for transformer applications. Unused modified/synthetized esters are derived from a natural or synthetic base, or are blends of both. This document covers a variety of ester liquids not covered by...view more
- Standard25 pagesEnglish language
sale 10% off- e-Library read for1 day
This document provides criteria for the re-use of sulphur hexafluoride (SF6) and its mixtures after recovery and reclaiming from electrical equipment (e.g. for maintenance, at the end-oflife). Sulphur hexafluoride (SF6), nitrogen (N2) and carbon tetrafluoride (CF4), are gases commonly used for electrical equipment. Taking into account environmental concerns, particular attention is paid to re-use criteria for SF6 and its mixtures with N2 and CF4 for its use in electrical equipment. Procedures fo...view more
- Standard51 pagesEnglish language
sale 10% off- e-Library read for1 day
IEC 63012:2019 defines requirements for the characterization of unused modified esters or blends of unused esters used as insulating liquids for electrotechnical applications. It does not cover liquids that contain any proportion of used liquids. The liquids covered by this document are intended mainly for transformer applications.
Unused modified/synthetized esters are derived from a natural or synthetic base, or are blends of both. This document covers a variety of ester liquids not covered b...view more
- Standard41 pagesEnglish and French language
sale 15% off
IEC 60480:2019 provides criteria for the re-use of sulphur hexafluoride (SF6) and its mixtures after recovery and reclaiming from electrical equipment (e.g. for maintenance, at the end-of-life).
Sulphur hexafluoride (SF6), nitrogen (N2) and carbon tetrafluoride (CF4), are gases commonly used for electrical equipment. Taking into account environmental concerns, particular attention is paid to re-use criteria for SF6 and its mixtures with N2 and CF4 for its use in electrical equipment. Procedures...view more
- Standard97 pagesEnglish and French language
sale 15% off
This document establishes the measurement of the interfacial tension between insulating
liquid and water by means of the Du Noüy ring method close to equilibrium conditions. In
order to obtain a value that provides a realistic expression of the real interfacial tension, a
measurement after a surface age of approximately 180 s is recorded.
- Standard23 pagesEnglish language
sale 10% off- e-Library read for1 day
IEC 62961:2018 establishes the measurement of the interfacial tension between insulating liquid and water by means of the Du Noüy ring method close to equilibrium conditions. In order to obtain a value that provides a realistic expression of the real interfacial tension, a measurement after a surface age of approximately 180 s is recorded.
- Standard23 pagesEnglish language
sale 10% off- e-Library read for1 day
IEC 62961:2018 establishes the measurement of the interfacial tension between insulating liquid and water by means of the Du Noüy ring method close to equilibrium conditions. In order to obtain a value that provides a realistic expression of the real interfacial tension, a measurement after a surface age of approximately 180 s is recorded.
- Standard41 pagesEnglish and French language
sale 15% off
This document defines the quality for technical grade sulphur hexafluoride (SF6) and
complementary gases such as nitrogen (N2) and carbon tetra-fluoride (CF4), for use in
electrical equipment. Detection techniques, covering both laboratory and in-situ
portable instrumentation, applicable to the analysis of SF6, N2 and CF4 gases prior to the
introduction of these gases into the electrical equipment are also described in this document.
This document provides some information on sulphur hexafl...view more
- Standard21 pagesEnglish language
sale 10% off- e-Library read for1 day
IEC 60376:2018 defines the quality for technical grade sulphur hexafluoride (SF6) and complementary gases such as nitrogen (N2) and carbon tetra-fluoride (CF4), for use in electrical equipment. Detection techniques, covering both laboratory and in-situ portable instrumentation, applicable to the analysis of SF6, N2 and CF4 gases prior to the introduction of these gases into the electrical equipment are also described in this document. This document provides some information on sulphur hexafluori...view more
- Standard21 pagesEnglish language
sale 10% off- e-Library read for1 day
IEC 60156:2018 is now available as IEC 60156:2018 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 60156:2018 specifies the method for determining the dielectric breakdown voltage of insulating liquids at power frequency. The test procedure is performed in a specified apparatus, where the oil sample is subjected to an increasing AC electrical field until breakdown occurs. The method applie...view more
- Standard37 pagesEnglish and French language
sale 15% off
IEC 60376:2018 defines the quality for technical grade sulphur hexafluoride (SF6) and complementary gases such as nitrogen (N2) and carbon tetra-fluoride (CF4), for use in electrical equipment. Detection techniques, covering both laboratory and in-situ portable instrumentation, applicable to the analysis of SF6, N2 and CF4 gases prior to the introduction of these gases into the electrical equipment are also described in this document.
This document provides some information on sulphur hexafluor...view more
- Standard37 pagesEnglish and French language
sale 15% off
This document describes a test method for evaluating the oxidation stability of insulating
liquids in the delivered state under accelerated conditions regardless of whether or not
antioxidant additives are present. The duration of the test can be different depending on the
insulating liquid type and is defined in the corresponding standards (e.g. in IEC 60296,
IEC 61099, IEC 62770). The method can be used for measuring the induction period, the test
being continued until the volatile acidit...view more
- Standard30 pagesEnglish language
sale 10% off- e-Library read for1 day
IEC 61125:2018 describes a test method for evaluating the oxidation stability of insulating liquids in the delivered state under accelerated conditions regardless of whether or not antioxidant additives are present. The duration of the test can be different depending on the insulating liquid type and is defined in the corresponding standards (e.g. in IEC 60296, IEC 61099, IEC 62770). The method can be used for measuring the induction period, the test being continued until the volatile acidity si...view more
- Standard30 pagesEnglish language
sale 10% off- e-Library read for1 day
IEC TR 62697-3:2018(E) specifies a test method for the quantitative determination of elemental sulfur in used and unused insulating liquids over a 2 mg kg–1 to 400 mg kg–1 concentration range.
- Technical report24 pagesEnglish language
sale 15% off
IEC TR 62697-2:2018(E) specifies a test method for the quantitative determination of total corrosive sulfur (TCS) in unused and used insulating liquids and solid matrices through the conversion of corrosive sulfur species to metal (copper, silver etc.) sulfides. The sulfides formed are quantitatively converted to sulfates; sulfates are determined through turbidity measurement or with ion chromatography.
The method is applicable with the following matrices:
a) Unused and used insulating liquids...view more
- Technical report19 pagesEnglish language
sale 15% off
IEC 61125:2018 describes a test method for evaluating the oxidation stability of insulating liquids in the delivered state under accelerated conditions regardless of whether or not antioxidant additives are present. The duration of the test can be different depending on the insulating liquid type and is defined in the corresponding standards (e.g. in IEC 60296, IEC 61099, IEC 62770). The method can be used for measuring the induction period, the test being continued until the volatile acidity si...view more
- Standard54 pagesEnglish and French language
sale 15% off