iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

EN 60839-11-31:2017

(Main)

Alarm and electronic security systems - Part 11-31: Electronic access control systems - Core interoperability protocol based on Web services

Alarm and electronic security systems - Part 11-31: Electronic access control systems - Core interoperability protocol based on Web services

IEC 60839-11-31:2016 defines procedures for communication between network clients and devices. This series of interoperability standards makes it possible to build an alarm and electronic security system with clients and devices from different manufacturers using common and well defined interfaces. The functions defined in this document covers discovery, device management and event framework. Supplementary dedicated services are defined in separate documents. The management and control interfaces defined in this document are described as Web services. This document also contains full XML schema and Web Service Description Language (WSDL) definitions. In order to offer full plug-and-play interoperability, this document defines procedures for device discovery. The device discovery mechanisms in this document are based on the WS-Discovery specification with extensions.

Alarmanlagen - Teil 11-31: Elektronische Zutrittskontrollanlagen - Basis Kommunikationsprotokoll basierend auf Web Services

Systèmes d'alarme et de sécurité électroniques - Partie 11-31: Systèmes de contrôle d'accès électronique - Protocole de base d’interopérabilité en fonction des services Web

L'IEC 60839-11-31:2016 définit les procédures de communication entre les clients en réseau et les dispositifs. Cette série de normes relatives à l’interopérabilité permet de concevoir un système d'alarme et de sécurité électronique avec des clients et des dispositifs de différents fabricants utilisant des interfaces communes et bien définies. Les fonctions définies dans le présent document couvrent la découverte, la gestion de dispositif et le cadre des événements. Des services spécialisés supplémentaires sont définis dans des documents séparés. Les interfaces de gestion et de contrôle définies dans le présent document sont décrites sous forme de services Web. Le présent document comprend également les définitions complètes du schéma XML et du langage de description de services Web (WSDL). Afin d'offrir une interopérabilité complète et prête à l'emploi, le présent document définit les procédures de découverte de dispositif. Les mécanismes de découverte de dispositif du présent document reposent sur la spécification WS-Discovery, avec des extensions.

Alarmni in elektronski varnostni sistemi - 11-31. del: Elektronski sistemi nadzora dostopa - Osnovni protokol interoperabilnosti na osnovi spletnih storitev

Ta del standarda IEC 60839 določa postopke za komunikacijo med omrežnimi odjemalci in napravami. Ta skupina standardov interoperabilnosti omogoča izgradnjo alarmnega in elektronskega varnostnega sistema z odjemalci in napravami različnih proizvajalcev, ki uporabljajo skupne in dobro opredeljene vmesnike. Funkcije, opredeljene v tem dokumentu, zajemajo odkritje, upravljanje naprav in okvir dogodkov. Dopolnilne namenske storitve so opredeljene v ločenih dokumentih.
Upravljalni in nadzorni vmesniki, opredeljeni v tem dokumentu, so opisani kot spletne storitve. Ta dokument vsebuje tudi definicije celotne sheme XML in jezika WSDL (Web Service Description Language).
Za namene zagotavljanja polne interoperabilnosti Plug and Play ta dokument opredeljuje postopke za odkrivanje naprav. Mehanizmi odkrivanja naprav v tem dokumentu temeljijo na specifikaciji WSDiscovery z razširitvami.
Ta dokument na noben način ne omejuje proizvajalca, da bi dodal druge protokole ali razširil pomen tukaj opredeljenega protokola, prav tako pa zagotavlja tudi pravila, kako naj to izvede.

General Information

Status
Published
Publication Date
16-Mar-2017
Withdrawal Date
28-Dec-2019
ICS
13.320 - Alarm and warning systems
Technical Committee
CLC/TC 79 - Alarm systems
Drafting Committee
IEC/TC 79 - IEC_TC_79
Current Stage
6060 - Document made available - Publishing
Start Date
17-Mar-2017
Completion Date
17-Mar-2017
Ref Project
SIST EN 60839-11-31:2017 - Alarm and electronic security systems - Part 11-31: Electronic access control systems - Core interoperability protocol based on Web services

Relations

Replaces
EN 62676-2-3:2014 - Video surveillance systems for use in security applications - Part 2-3: Video transmission protocols - IP interoperability implementation based on Web services
Effective Date
23-Jan-2023

Buy Standard

EN 60839-11-31:2017 - BARVEEN 60839-11-31:2017 - BARVE
PreviousNext
Standard
EN 60839-11-31:2017 - BARVE
English language
201 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-junij-2017
Alarmni in elektronski varnostni sistemi - 11-31. del: Elektronski sistemi nadzora
dostopa - Osnovni protokol interoperabilnosti na osnovi spletnih storitev
Alarm and electronic security systems - Part 11-31: Electronic access control systems -
Core interoperability protocol based on Web services
Systèmes d'alarme et de sécurité électroniques - Partie 11-31: Systèmes de contrôle
d'accès électronique - Protocole de base d’interopérabilité en fonction des services Web
Ta slovenski standard je istoveten z: EN 60839-11-31:2017
ICS:
13.320 Alarmni in opozorilni sistemi Alarm and warning systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 60839-11-31

NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2017
ICS 13.320
English Version
Alarm and electronic security systems -
Part 11-31: Electronic access control systems - Core
interoperability protocol based on Web services
(IEC 60839-11-31:2016)
Systèmes d'alarme et de sécurité électroniques -  Alarmanlagen -
Partie 11-31: Systèmes de contrôle d'accès électronique - Teil 11-31: Elektronische Zutrittskontrollanlagen - IP
Protocole de base d'interopérabilité en fonction des Interoperabilität auf Basis von Webservices -
services Web Kernspezifikation
(IEC 60839-11-31:2016) (IEC 60839-11-31:2016)
This European Standard was approved by CENELEC on 2016-12-29. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 60839-11-31:2017 E

European foreword
The text of document 79/522/CDV, future edition 1 of IEC 60839-11-31, prepared by
IEC/TC 79 "Alarm and electronic security systems" was submitted to the IEC-CENELEC parallel vote
and approved by CENELEC as EN 60839-11-31:2017.

The following dates are fixed:
(dop) 2017-09-29
• latest date by which the document has to be
implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2019-12-29
standards conflicting with the
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 60839-11-31:2016 was approved by CENELEC as a
European Standard without any modification.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.

NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu
Publication Year Title EN/HD Year

IEEE 1003.1 - The Open Group Base Specifications
Issue 6, IEEE Std 1003.1, 2004 Edition
IEEE 802.11 2007 IEEE Standard for Information technology - - -
Telecommunications and information
exchange between systems - Local and
metropolitan area networks - Specific
requirements - Part 11: Wireless LAN
Medium Access Control (MAC) and
Physical Layer (PHY) Specifications
IEEE 802.1X 2004 Port Based Network Access Control - -
IETF RFC 952 -  DoD Internet Host Table Specification - -
IETF RFC 1123 1989 Requirements for Internet Hosts - - -
Application and Support
IETF RFC 2131 -  Dynamic Host Configuration Protocol - -
IETF RFC 2136 -  Dynamic Updates in the Domain Name - -
System (DNS UPDATE)
IETF RFC 2246 -  The TLS Protocol Version 1.0 - -
IETF RFC 2617 -  HTTP Authentication: Basic and Digest - -
Access Authentication
IETF RFC 2986 -  PKCS #10: Certification Request Syntax - -
Specification Version 1.7
IETF RFC 3268 -  Advanced Encryption Standard (AES) - -
Cipher suites for Transport Layer Security
(TLS)
IETF RFC 3315 -  Dynamic Host Configuration Protocol for - -
IPv6 (DHCPv6)
IETF RFC 3927 -  Dynamic Configuration of IPv4 Link-Local - -
Addresses
IETF RFC 4122 -  A Universally Unique IDentifier (UUID) - -
URN Namespace
Publication Year Title EN/HD Year

IETF RFC 4514 -  Lightweight Directory Access Protocol - -
(LDAP): String Representation of
Distinguished Names
IETF RFC 4702 -  The Dynamic Host Configuration Protocol - -
(DHCP) Client Fully Qualified Domain
Name (FQDN) Option
IETF RFC 4861 -  Neighbor Discovery for IP version 6 (IPv6) - -
IETF RFC 4862 -  IPv6 Stateless Address Auto configuration - -
ISO/IEC 8824-2 -  Information technology - Abstract Syntax - -
Notation One (ASN.1): Information object
specification
ISO/IEC 8824-3 -  Information technology - Abstract Syntax - -
Notation One (ASN.1): Constraint
specification
ISO/IEC 8824-4 -  Information technology - Abstract Syntax - -
Notation One (ASN.1): Parameterization of
ASN.1 specifications
ISO/IEC 8825-1 -  Information technology - ASN.1 encoding - -
rules: Specification of Basic Encoding
Rules (BER), Canonical Encoding Rules
(CER) and Distinguished Encoding Rules
(DER)
OASIS WS- - Web Services Base Notification 1.3 (WS-
BaseNotification BaseNotification)
OASIS WS-Topics - Web Services Topics 1.3 (WS-Topics)
W3C SOAP-MTOM -  SOAP Message Transmission Optimization - -
Mechanism
W3C SOAP Part 1 -  SOAP Version 1.2 - Part 1: Messaging - -
Framework
W3C -  Web Services Addressing 1.0 - Core - -
WS-Addressing
WS-I BP 2.0 - Basic Profile Version 2.0
XMLSOAP - Web Services Dynamic Discovery (WS-
WS-Discovery Discovery)”, J. Beatty et al.,
April 2005
IEC 60839-11-31 ®
Edition 1.0 2016-11
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Alarm and electronic security systems –

Part 11-31: Electronic access control systems – Core interoperability protocol

based on Web services
Systèmes d'alarme et de sécurité électroniques –

Partie 11-31: Systèmes de contrôle d'accès électronique – Protocole de base

d’interopérabilité en fonction des services Web

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 13.320 ISBN 978-2-8322-3778-6

– 2 – IEC 60839-11-31:2016 © IEC 2016
CONTENTS
FOREWORD . 10
INTRODUCTION . 12
1 Scope . 13
2 Normative references . 13
3 Terms, definitions and abbreviated terms . 15
3.1 Terms and definitions . 15
3.2 Abbreviated terms . 16
4 Overview . 17
4.1 General . 17
4.2 Web services . 17
4.3 IP configuration . 18
4.4 Device discovery . 18
4.5 Device management . 19
4.5.1 General . 19
4.5.2 Capabilities. 19
4.5.3 Network . 19
4.5.4 System . 20
4.5.5 Retrieval of system information . 20
4.5.6 Firmware upgrade . 20
4.5.7 SystemRestore . 20
4.5.8 Security . 20
4.6 DeviceIO . 21
4.7 Event handling . 21
4.8 Security . 21
5 Web services framework . 21
5.1 General . 21
5.2 Services overview . 22
5.2.1 General . 22
5.2.2 Services requirements . 22
5.3 WSDL overview . 22
5.4 Namespaces . 23
5.5 Types. 24
5.6 Messages . 24
5.7 Operations . 25
5.7.1 General . 25
5.7.2 One-way operation type . 26
5.7.3 Request-response operation type . 26
5.8 Port types . 27
5.9 Binding . 27
5.10 Ports . 27
5.11 Services . 28
5.12 Error handling . 28
5.12.1 General . 28
5.12.2 Protocol errors . 28
5.12.3 SOAP errors . 28
5.13 Security . 31
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN IEC 62676-2-11:2024(Main)
Video Surveillance Systems (VSS) for use in security applications - Part 2-11: Video transmission protocols - Interop profiles for VMS and cloud VSaaS systems for safe cities and law enforcement
SIST EN IEC 62676-2-11:2024

IEC 62676-2-11:2024 defines minimum requirement profiles for Video Management Systems (VMS) and cloud Video-Surveillance-as-a-Service (VSaaS) Systems to optimize interfacing with third parties. It defines minimum required VMS interoperability levels from video export to exclusive video control, for the sake of remote support, for example in crisis situations, regulating governmental organizations, national law enforcement, private security service companies, public transport operators and other authorities. This document is intended to set the common technical basis for national regulations requiring inter-organizational remote, local or on-site access, for example so that authorities can be granted temporary access to the VSS in the case of emergency situations. This standard is accordingly expected to supersede ISO 22311 (Societal Security - Video-surveillance - Export interoperability).

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50726-1:2024(Main)
Emergency and danger systems - Part 1: Emergency and danger response systems (EDRS) - Basic requirements, duties, responsibilities and activities
SIST EN 50726-1:2024

This document applies to the planning, installation, commissioning, operation and maintenance of an emergency and danger response system. An emergency and danger response system is part of an overall solution for dealing with specific events such as emergencies or crises. This document - specifies: - technical processes and responsibilities for supporting all procedures from the registration of an event (emergency, danger) up to its final processing; - the technical risk management including the definition of safety/security goals and the workflow organization as well as the necessary specifications regarding a technical risk management file; - associated duties, responsibilities and activities as parts of an integrated overall risk management process to achieve the safety and security goals, effectiveness and efficiency as well as data and system safety/security; - three different grades of safety/security, with the respective product functionalities required to achieve them; - the basic requirements for emergency and danger response systems (EDRS) in public buildings such as education facilities (e.g. schools, universities), government facilities, kindergartens and similar facilities; - the responsibilities under applicable national law about Safety and Health at Work Laws and thus particularly addresses the responsibility of employers; - describes: - the process of establishing, maintaining and updating a risk management file in which, inter alia, the technical risks are listed and evaluated and the residual technical risks are defined, resulting in the grade and structure of the EDRS; - is intended to support the implementation of: - National legal and other provisions (e.g. Act on Equal Opportunities for People with Disabilities, Safety and Health at Work Laws, education laws); - gives relevant guidance on: - the organizational risk management; - does not replace the specifications of standards to the following systems: - fire safety systems including, but not limited to, fire detection and fire alarm systems, fixed firefighting systems, smoke and heat control systems, - security systems including, but not limited to, intrusion and hold-up alarm systems, electronic access control systems, external perimeter security systems and video surveillance systems, - applicable national standards on call systems. All such systems can, however, be integrated into an emergency and danger response system (EDRS), taking into account the relevant provisions made in the respective standards for such products and systems. Other products and systems from the entire field of standardization, such as alarm systems, danger warning and danger alarm systems, escape routing systems, public address systems used to respond to a danger, can also be used in or integrated into an emergency and danger response system if the relevant requirements of the standards for such products or systems are met. This document does not specify any risk levels, in particular no acceptable residual risks. Technical risk management and organizational risk management are equal parts of the overall risk management. This document is also applicable to non-public buildings with a similar risk and requirement for protection.

  • Standard
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50518:2019/A1:2023(Amendment)
Monitoring and Alarm Receiving Centre
SIST EN 50518:2019/A1:2023

This document specifies the minimum requirements for monitoring, receiving and processing of alarm messages generated by alarm systems taking place as a part of the total fire, safety and security solution. For the purpose of this document, the term “alarm” is used in the broad sense to include fault, status and other messages received from one or more of a range of safety and security alarm systems such as but not limited to fire detection and fire alarm systems, fixed firefighting systems, intrusion and hold-up alarm systems, access control systems, video surveillance systems, social alarms systems and combinations of such systems. This document gives requirements for two categories of ARC, category I and category II. A category I ARC will be designed, constructed and operated to a higher standard with respect to construction, security and integrity than a category II ARC. The categorization is determined according to the type(s) of alarm messages handled. Category I: ARCs handling messages from security applications: - I&HAS’s; - access control systems; - VSS in security applications that require an emergency response (for example loss prevention); - people monitoring, lone workers and object tracking systems for security applications; - alarm messages handled by category II ARCs; - combinations of the above systems. Category II: ARC’s handling messages from non-security applications: - fire alarm systems; - fixed firefighting systems; - social alarm systems; - audio/video door entry systems; - VSS in non-security applications (for example traffic flow); - people monitoring, lone workers and object tracking systems for non-security applications; - lifts emergency systems; - combinations of the above systems. The requirements apply to ARC’s (whether established in single or multiple sites) monitoring and processing alarms generated by systems installed at other locations and also to ARC’s monitoring solely alarms from systems within their own site. The document includes functional and specific requirements supporting the services of an ARC. The document does NOT apply to: - alarm systems used for non-civil purposes; - alarm systems for medical or health applications.

  • Amendment
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50136-2:2013/A1:2023(Amendment)
Alarm systems - Alarm transmission systems and equipment - Part 2: Requirements for Supervised Premises Transceiver (SPT)
SIST EN 50136-2:2013/A1:2023

This European Standard specifies the general equipment requirements for the performance, reliability, resilience, security and safety characteristics of supervised premises transceiver (SPT) installed in supervised premises and used in alarm transmission systems (ATS). A supervised premises transceiver can be a stand-alone device or an integrated part of an alarm system. These requirements also apply to SPT’s sharing means of interconnection, control, communication and power supplies with other applications. The alarm transmission system requirements and classifications are defined within EN 50136-1. Different types of alarm systems may in addition to alarm messages also send other types of messages, e.g. fault messages and status messages. The term alarm is used in this broad sense throughout the document. Additional requirements for the connection of specific types of alarm systems are given in the relevant European Standards. Because the SPT can be applied in different applications (e.g. I&HAS, fire and social alarm systems), requirements for the SPT, additional to those of this European Standard, may be specified in separate application specific documents. This European Standard specifies the requirements specific to alarm transmission. Application specific requirements for the connection of the SPT to specific types of alarm systems are given in the EN/TS 50131 series for I&HAS, and EN 54 series for fire. For other SPT applications, see the relevant National or European standards.

  • Amendment
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62676-2-33:2022(Main)
Video surveillance systems for use in security applications - Part 2-33: Video transmission protocols - Cloud uplink and remote management system access
SIST EN IEC 62676-2-33:2022

This part of the IEC 62676 series specifies management systems interfaces and mechanism for remote operational access to physical security devices such as video surveillance devices and systems. For video surveillance, the use cases focus on accessing live video and retrieving recordings. The mechanism defined in this specification are not restricted to surveillance applications but also cover remote access to security systems and electronic access control systems. Configuration of devices and management systems is out of scope of this specification. Clause 4 introduces to remote management access. Clause 5 defines a set of requirements that the protocol needs to fulfil. Clause 6 extends the token-based resource-addressing scheme of the underlying specification IEC 60839-11-31. Clause 7 describes how to retrieve information about remote resources. Clause 8 defines how to connect to devices that are not directly reachable because they are e.g. located behind firewalls.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
CLC/TS 50136-10:2022(Main)
Alarm systems - Alarm transmission systems and equipment - Part 10: Requirements for remote access
SIST-TS CLC/TS 50136-10:2022

This document specifies minimum requirements for secure connection and session for remote access to one or more alarm systems, for example fire safety systems, intruder and hold-up alarm systems, electronic access control systems, external perimeter security systems, video surveillance systems, and social alarm systems. This document specifies the requirements for the performance, reliability, integrity, and security characteristics of a Remote Access Infrastructure. This document specifies the requirements for a Remote Access Infrastructure between a Remote Access Client and an alarm system at the supervised premises and may be either integrated as part of the ATS or a separate infrastructure. In either case, the requirements of this European technical specification should apply. This document does not cover the provision of functions and features on the alarm system.

  • Technical specification
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 62820-1-1:2016/A11:2021(Amendment)
Building intercom systems - Part 1-1: System requirements - General
SIST EN 62820-1-1:2017/A11:2022

IT NC submits to CLC TC79 the request for an amendment work of the EN 62820-1-1:2016, within CLC/TC 79/WG 15

  • Amendment
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50131-2-3:2021(Main)
Alarm systems - Intrusion and hold-up systems - Part 2-3: Requirements for microwave detectors
SIST EN 50131-2-3:2022

This document is for microwave detectors installed in buildings and provides for security grades 1 to 4 (see EN 50131 1), specific or non-specific wired or wire-free detectors, and uses environmental classes I to IV (see EN 50130 5). This document does not include requirements for detectors intended for use outdoors. The purpose of the detector is to emit microwave signals and analyse the signals that are returned to detect an intruder and to provide the necessary range of signals or messages to be used by the rest of the intrusion alarm system. The grade-dependent requirements of this document apply and it is essential that a detector fulfils all the requirements of the specified grade. Functions additional to the mandatory functions specified in this document can be included in the detector, providing they do not influence the correct operation of the mandatory functions. Requirements for system interconnections are not included in this document.

  • Standard
    46 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60839-11-33:2021(Main)
Alarm and electronic security systems - Part 11-33: Electronic access control systems - Access control configuration based on Web services
SIST EN IEC 60839-11-33:2021

This part of IEC 60839 defines the Web services interface for electronic access control systems. This includes listing electronic access control system components, their logical composition, monitoring their states and controlling them. It also includes a mapping of mandatory and optional requirements in accordance with IEC 60839-11-1:2013, as covered by Annex B. This document applies to physical security only. Physical security prevents unauthorized personnel, attackers or accidental intruders from physically accessing a building, room, etc. Web services usage and device management functionality are outside the scope of this document. Refer to IEC 60839-11-31:2016 for more information. This document does not in any way limit a manufacturer to add other protocols or extend the protocol defined here. For rules on how to accomplish this, refer to IEC 60839-11-31:2016.

  • Standard
    185 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50134-5:2021(Main)
Alarm systems - Social alarm systems - Part 5: Interconnections and communications
SIST EN 50134-5:2021

This document specifies the minimum requirements for the performance, reliability and security characteristics of interconnections, alarm transmission systems and communications within a social alarm system.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day