EN IEC 62841-2-3:2021/A11:2021

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-3: Particular requirements for hand-held grinders, disc-type polishers and disc-type sanders

This part of IEC 62841 applies to hand-held grinders, disc-type polishers and disc-type sanders, including angle, straight and vertical tools, intended for use on various materials except magnesium, with a rated capacity not exceeding 230 mm. For grinders, the rated no-load speed does not exceed a peripheral speed of the accessory of 80 m/s at rated capacity.

Elektrische motorbetriebene handgeführte Werkzeuge, transportable Werkzeuge und Rasen- und Gartenmaschinen - Sicherheit - Teil 2-3: Besondere Anforderungen für handgeführte Schleifer, Polierer mit Polierscheibe und Schleifer mit Schleifblatt

Outils électroportatifs à moteur, outils portables et machines pour jardins et pelouses - Sécurité - Partie 2-3: Exigences particulières pour les meuleuses portatives et pour les lustreuses et ponceuses portatives du type à disque

Elektromotorna ročna orodja, prenosna orodja ter stroji za trato in vrt - Varnost - 2-3. del: Posebne zahteve za ročne brusilnike, diskovne polirnike in diskovne brusilnike - Dopolnilo A11

General Information

• Status: Published
• Publication Date: 27-May-2021
• ICS: 25.140.20 - Electric tools
• Technical Committee: CLC/TC 116 - Safety of hand-held motor-operated electric tools
• Drafting Committee: CLC/TC 116 - Safety of hand-held motor-operated electric tools
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 28-May-2021
• Due Date: 15-May-2022
• Completion Date: 28-May-2021
• Directive: 2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
• Mandate: M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
• Ref Project: SIST EN IEC 62841-2-3:2021/A11:2021 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-3: Particular requirements for hand-held grinders, disc-type polishers and disc-type sanders

Relations

• Amends: EN IEC 62841-2-3:2021 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-3: Particular requirements for hand-held grinders, disc-type polishers and disc-type sanders
• Effective Date: 07-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 62841-2-3:2021/A11:2021
01-julij-2021
Elektromotorna ročna orodja, prenosna orodja ter stroji za trato in vrt - Varnost - 2-
3. del: Posebne zahteve za ročne brusilnike, diskovne polirnike in diskovne
brusilnike - Dopolnilo A11
Electric motor-operated hand-held tools, transportable tools and lawn and garden
machinery - Safety - Part 2-3: Particular requirements for hand-held grinders, disc-type
polishers and disc-type sanders
Elektrische motorbetriebene handgeführte Werkzeuge, transportable Werkzeuge und
Rasen- und Gartenmaschinen - Sicherheit - Teil 2-3: Besondere Anforderungen für
handgeführte Schleifer, Polierer mit Polierscheibe und Schleifer mit Schleifblatt
Outils électroportatifs à moteur, outils portables et machines pour jardins et pelouses -
Sécurité - Partie 2-3: Exigences particulières pour les meuleuses portatives et pour les
lustreuses et ponceuses portatives du type à disque
Ta slovenski standard je istoveten z: EN IEC 62841-2-3:2021/A11:2021
ICS:
25.080.50 Brusilni in polirni stroji Grinding and polishing
machines
25.140.20 Električna orodja Electric tools
SIST EN IEC 62841-2-3:2021/A11:2021 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 62841-2-3:2021/A11:2021

---------------------- Page: 2 ----------------------
SIST EN IEC 62841-2-3:2021/A11:2021


EUROPEAN STANDARD EN IEC 62841-2-3:2021/A11

NORME EUROPÉENNE

EUROPÄISCHE NORM
May 2021
ICS 25.140.20

English Version
Electric motor-operated hand-held tools, transportable tools and
lawn and garden machinery - Safety - Part 2-3: Particular
requirements for hand-held grinders, disc-type polishers and
disc-type sanders
Outils électroportatifs à moteur, outils portables et machines Elektrische motorbetriebene handgeführte Werkzeuge,
pour jardins et pelouses - Sécurité - Partie 2-3: Exigences transportable Werkzeuge und Rasen- und
particulières pour les meuleuses portatives et pour les Gartenmaschinen - Sicherheit - Teil 2-3: Besondere
lustreuses et ponceuses portatives du type à disque Anforderungen für handgeführte Schleifer, Polierer mit
Polierscheibe und Schleifer mit Schleifblatt
This amendment A11 modifies the European Standard EN IEC 62841-2-3:2021; it was approved by CENELEC on 2021-05-03. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 62841-2-3:2021/A11:2021 E

---------------------- Page: 3 ----------------------
SIST EN IEC 62841-2-3:2021/A11:2021
EN IEC 62841-2-3:2021/A11:2021 (E)
European foreword
This document (EN IEC 62841-2-3:2021/A11:2021) has been prepared by CLC/TC 116 “Safety and
environmental aspects of motor-operated electric tools”.
The following dates are fixed:
• latest date by which this document has (dop) 2022-05-03
to be implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2025-05-03
standards conflicting with this document
have to be withdrawn
This document modifies by common modifications EN IEC 62841-2-3:2021, which consists of the text of
116/444/FDIS (future IEC 62841-2-3, Ed 1) prepared by IEC/TC 116 “Safety of motor-operated electric
tools”.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
This series is divided into four parts:
Part 1: General requirements wh
...