Power transformers - Part 22-2: Power transformer and reactor fittings - Removable radiators

IEC 60076-22-2:2019 applies to radiators mounted on liquid immersed power transformers according to IEC 60076-1 and reactors according to IEC 60076-6 with and without conservator for indoor or outdoor installation. It outlines the service conditions and the mechanical and electrical requirements that are common to this equipment. It also outlines the operation requirements specific to this equipment as well as the preferred dimensions relevant for interchangeability and the type and routine tests to be performed. Keywords: radiators mounted on liquid immersed power transformers

Leistungstransformatoren - Teil 22-2: Anbauten für Leistungstransformatoren und Drosselspulen - Abnehmbare Radiatoren

Transformateurs de puissance - Partie 22-2: Accessoires pour transformateurs de puissance et bobines d'inductance - Radiateurs détachables

IEC 60076-22-2:2019 s’applique aux radiateurs montés sur des transformateurs de puissance immergés dans un liquide conformes à l'IEC 60076-1 et aux bobines d'inductance conformes à l'IEC 60076-6 avec et sans conservateur pour les installations intérieures ou extérieures. Elle présente les conditions de service et les exigences mécaniques et électriques communes à ces équipements. Elle présente également les exigences de fonctionnement spécifiques à ces équipements et les dimensions préférentielles pertinentes pour l’interchangeabilité, ainsi que les essais de type et individuels de série à réaliser. Mots clés: radiateurs montés sur des transformateurs de puissance immergés dans un liquide

Hladilna oprema za močnostne transformatorje in dušilke – 22-2. del: Odstranljivi radiatorji

Ta standard se uporablja za radiatorje, ki so nameščeni na v tekočini potopljenih močnostnih transformatorjih v skladu s standardom IEC 60076-1 in reaktorje v skladu s standardom IEC 60076-6 z raztezno posodo in brez nje za notranjo ter zunanjo namestitev. V njem so opisani servisni pogoji ter mehanske in električne zahteve, ki so skupne tej opremi. Določa tudi obratovalne zahteve za posamezno opremo in prednostne dimenzije, ki so pomembne za izmenljivost ter rutinske in tipske preskuse, ki jih je treba opraviti.

General Information

Publication Date
Withdrawal Date
Technical Committee
Drafting Committee
Current Stage
6060 - Document made available - Publishing
Start Date
Completion Date


Buy Standard

EN IEC 60076-22-2:2019 - BARVE
English language
28 pages
sale 10% off
sale 10% off
e-Library read for
1 day

Standards Content (Sample)

SIST EN IEC 60076-22-2:2019
Hladilna oprema za močnostne transformatorje in dušilke – 22-2. del: Odstranljivi
Power transformer and reactor cooling equipment - Part 22-2: Removable radiators
Ta slovenski standard je istoveten z: EN IEC 60076-22-2:2019
29.180 Transformatorji. Dušilke Transformers. Reactors
SIST EN IEC 60076-22-2:2019 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 60076-22-2:2019

---------------------- Page: 2 ----------------------
SIST EN IEC 60076-22-2:2019



June 2019
ICS 29.180

English Version
Power transformer and reactor cooling equipment - Part 22-2:
Removable radiators
(IEC 60076-22-2:2019)
Transformateurs de puissance - Partie 22-2: Accessoires Leistungstransformatoren und Drosselspulen
pour transformateurs de puissance et bobines d'inductance Kühlungseinrichtung - Teil 22-2: Abnehmbare Kühler
- Radiateurs détachables (IEC 60076-22-2:2019)
(IEC 60076-22-2:2019)
This European Standard was approved by CENELEC on 2019-02-20. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 60076-22-2:2019 E

---------------------- Page: 3 ----------------------
SIST EN IEC 60076-22-2:2019
EN 60076-22-2:2019 (E)
European foreword
The text of document 14/895/CDV, future edition 1 of IEC 60076-22-2, prepared by IEC/TC 14 "Power
transformers" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
EN 60076-22-2:2019.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2019-12-28
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2022-06-28
document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

Endorsement notice
The text of the International Standard IEC 60076-22-2:2019 was approved by CENELEC as a
European Standard without any modification.

In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 60076-6 NOTE Harmonized as EN 60076-6


---------------------- Page: 4 ----------------------
SIST EN IEC 60076-22-2:2019
EN 60076-22-2:2019 (E)
Annex ZA

Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
Publication Year Title EN/HD Year
IEC 60076-1 -  Power transformers - Part 1: General EN 60076-1 -
IEC 60076-7 -  Power transformers -- Part 7: Loading guide - -
for oil-immersed power transformers
IEC 60296 -  Fluids for electrotechnical applicat

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.