EN ISO 12944-3:1998
(Main)Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 3: Design considerations (ISO 12944-3:1998)
Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 3: Design considerations (ISO 12944-3:1998)
Migrated from Progress Sheet (TC Comment) (2000-07-10): !!! prEN ISO 12944-1 to -8 are a package: DOW = 1997-12-31 !!! (BT C 95/1996)
Beschichtungsstoffe - Korrosionsschutz von Stahlbauten durch Beschichtungssysteme - Teil 3: Grundregeln zur Gestaltung (ISO 12944-3:1998)
Dieser Teil von ISO 12944 behandelt Grundregeln zur Gestaltung von mit Beschichtungssystemen zu versehenden Stahlbauten, um vorzeitige Korrosion und Schäden der Beschichtung oder des Bauwerks zu vermeiden. Die Norm gibt Beispiele für geeignetes und ungeeignetes Gestalten und zeigt, wie Schwierigkeiten beim Auftragen, beim Überwachen und beim Instandsetzen von Beschichtungssystemen vermieden werden können. Gestaltungsregeln, welche die Handhabung und den Transport von Stahlbauten erleichtern, sind ebenfalls enthalten.
Peintures et vernis - Anticorrosion des structures en acier par systèmes de peinture - Partie 3: Conception et dispositions constructives (ISO 12944-3:1998)
La présente partie de l'ISO 12944 traite des critères fondamentaux de conception des structures en acier qui doivent être revêtues de systèmes de peinture afin d'éviter la corrosion prématurée et la détérioration du revêtement ou de la structure. Elle donne des exemples de bonnes et de mauvaises dispositions, en indiquant comment les problèmes d'application, du contrôle et de l'entretien des systèmes de peinture peuvent être évités. Elle examine également les dispositions qui facilitent la manutention et le transport des structures en acier.
Barve in laki - Korozijska zaščita jeklenih konstrukcij z zaščitnimi premaznimi sistemi - 3. del: Upoštevanje vrste in načina oblikovanja konstrukcije (ISO 12944-3:1998)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 12944-3:1998
01-september-1998
%DUYHLQODNL.RUR]LMVND]DãþLWDMHNOHQLKNRQVWUXNFLM]]DãþLWQLPLSUHPD]QLPL
VLVWHPLGHO8SRãWHYDQMHYUVWHLQQDþLQDREOLNRYDQMDNRQVWUXNFLMH,62
Paints and varnishes - Corrosion protection of steel structures by protective paint
systems - Part 3: Design considerations (ISO 12944-3:1998)
Beschichtungsstoffe - Korrosionsschutz von Stahlbauten durch Beschichtungssysteme -
Teil 3: Grundregeln zur Gestaltung (ISO 12944-3:1998)
Peintures et vernis - Anticorrosion des structures en acier par systemes de peinture -
Partie 3: Conception et dispositions constructives (ISO 12944-3:1998)
Ta slovenski standard je istoveten z: EN ISO 12944-3:1998
ICS:
25.220.20 Površinska obdelava Surface treatment
87.040 Barve in laki Paints and varnishes
91.080.13 Jeklene konstrukcije Steel structures
SIST EN ISO 12944-3:1998 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 12944-3:1998
---------------------- Page: 2 ----------------------
SIST EN ISO 12944-3:1998
---------------------- Page: 3 ----------------------
SIST EN ISO 12944-3:1998
---------------------- Page: 4 ----------------------
SIST EN ISO 12944-3:1998
---------------------- Page: 5 ----------------------
SIST EN ISO 12944-3:1998
---------------------- Page: 6 ----------------------
SIST EN ISO 12944-3:1998
INTERNATIONAL ISO
STANDARD 12944-3
First edition
1998-05-15
Paints and varnishes — Corrosion
protection of steel structures by protective
paint systems —
Part 3:
Design considerations
Peintures et vernis — Anticorrosion des structures en acier par systèmes
de peinture —
Partie 3: Conception et dispositions constructives
A
Reference number
ISO 12944-3:1998(E)
---------------------- Page: 7 ----------------------
SIST EN ISO 12944-3:1998
ISO 12944-3:1998(E)
CONTENTS Page
1 Scope.1
2 Normative references .1
3 Definition.1
4 General.2
5 Basic design criteria for corrosion protection purposes.2
5.1 Accessibility .2
5.2 Treatment of gaps.3
5.3 Precautions to prevent retention of deposits and water .3
5.4 Edges.3
5.5 Welding surface imperfections.3
5.6 Bolted connections .3
5.7 Box members and hollow components.4
5.8 Notches.4
5.9 Stiffeners.4
5.10 Prevention of galvanic corrosion .4
5.11 Handling, transport and erection.5
Annex A Accessibility - Typical distances required for tools in corrosion protection work.6
Annex B Recommended minimum dimensions of openings for access to confined areas .7
Annex C Minimum dimensions for narrow spaces between surfaces .8
Ann
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.