EN 60793-1-48:2017

Optical fibres - Part 1-48: Measurement methods and test procedures - Polarization mode Dispersion

Applies to three methods of measuring polarization mode dispersion (PMD). Establishes uniform requirements for measuring the PMD of single-mode optical fibre, thereby assisting in the inspection of fibres and cables for commercial purposes. In this edition, reference to IEC 61282-9 has resulted in the removal of Annexes E, F, G and H as well as the creation of a new Annex E.

Lichtwellenleiter - Teil 1-48: Messmethoden und Prüfverfahren - Polarisationsmodendispersion

Fibres optiques - Partie 1-48: Méthodes de mesure et procédures d’essai - Dispersion de mode de polarisation

S'appliques aux trois méthodes de mesure de la dispersion de mode de polarisation (Polarization Mode Dispersion, PMD). Elle établit des exigences uniformes pour mesurer la PMD d'une fibre optique unimodale, de façon à aider dans l'examen des fibres et des câbles à des fins commerciales. Dans cette édition, la référence à la CEI 61289-2 a entraîné le retrait des Annexes E, F, G et H ainsi que la création d'une nouvelle Annexe E.

Optična vlakna - 1-48. del: Metode merjenja in preskusni postopki - Disperzija z načinom polarizacije (IEC 60793-1-48:2017)

Uporablja se za tri merilne metode polarizacijske razpršitve (PMD).  Določa enotne zahteve za merjenje polarizacijske razpršitve enorodnih optičnih vlaken, pri čemer pomaga pri pregledu vlaken in kablov za komercialne namene. V tej izdaji je bil dodan sklic na standard IEC 61282-9, zato so bili odstranjeni dodatki E, F, G in H ter je bil oblikovan nov dodatek E.

General Information

• Status: Published
• Publication Date: 07-Dec-2017
• Withdrawal Date: 26-Sep-2020
• ICS: 33.180.10 - Fibres and cables
• Technical Committee: CLC/TC 86A - Optical fibres and optical fibre cables
• Drafting Committee: IEC/SC 86A - IEC_SC_86A
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 08-Dec-2017
• Completion Date: 08-Dec-2017
• Ref Project: SIST EN 60793-1-48:2018 - Optical fibres - Part 1-48: Measurement methods and test procedures - Polarization mode dispersion (IEC 60793-1-48:2017)

Relations

• Replaces: EN 60793-1-48:2007 - Optical fibres - Part 1-48: Measurement methods and test procedures - Polarization mode dispersion
• Effective Date: 03-Nov-2015

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60793-1-48:2018
01-februar-2018
1DGRPHãþD
SIST EN 60793-1-48:2008
2SWLþQDYODNQDGHO0HWRGHPHUMHQMDLQSUHVNXVQLSRVWRSNL'LVSHU]LMD]
QDþLQRPSRODUL]DFLMH,(&
Optical fibres - Part 1-48: Measurement methods and test procedures - Polarization
mode dispersion (IEC 60793-1-48:2017)
Lichtwellenleiter - Teil 1-48: Messmethoden und Prüfverfahren -
Polarisationsmodendispersion (IEC 60793-1-48:2017)
Fibres optiques - Partie 1-48: Méthodes de mesure et procédures d'essai - Dispersion du
mode de polarisation (IEC 60793-1-48:2017)
Ta slovenski standard je istoveten z: EN 60793-1-48:2017
ICS:
33.180.10 2SWLþQDYODNQDLQNDEOL Fibres and cables
SIST EN 60793-1-48:2018 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60793-1-48:2018

---------------------- Page: 2 ----------------------

SIST EN 60793-1-48:2018


EUROPEAN STANDARD EN 60793-1-48

NORME EUROPÉENNE

EUROPÄISCHE NORM
December 2017
ICS 33.180.10 Supersedes EN 60793-1-48:2007
English Version
Optical fibres - Part 1-48: Measurement methods and test
procedures - Polarization mode Dispersion
(IEC 60793-1-48:2017)
Fibres optiques - Partie 1-48: Méthodes de mesure et Lichtwellenleiter - Teil 1-48: Messmethoden und
procédures d'essai - Dispersion de mode de polarisation Prüfverfahren - Polarisationsmodendispersion
(IEC 60793-1-48:2017) (IEC 60793-1-48:2017)
This European Standard was approved by CENELEC on 2017-09-27. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 60793-1-48:2017 E

---------------------- Page: 3 ----------------------

SIST EN 60793-1-48:2018
EN 60793-1-48:2017
European foreword
The text of document 86A/1678/CDV, future edition 3 of IEC 60793-1-48 , prepared by SC 86A "Fibres
and cables" of IEC/TC 86 "Fibre optics" was submitted to the IEC-CENELEC parallel vote and
approved by CENELEC as EN 60793-1-48:2017.

The following dates are fixed:

• latest date by which the document has to be (dop) 2018-06-27
implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2020-09-27
standards conflicting with the
document have to be withdrawn

This document supersedes EN 60793-1-48:2007.

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 60793-1-48:2017 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60793-1-44 NOTE Harmonized as EN 60793-1-44.
IEC 60793-1-50 NOTE Harmonized as EN 60793-1-50.
IEC 60793-2-50 NOTE Harmonized as EN 60793-2-50.
IEC 60794-3 NOTE Harmonized as EN 60794-3.
IEC 61280-4-4 NOTE Harmonized as EN 61280-4-4.
IEC 61290-11-1 NOTE Harmonized as EN 61290-11-1.
IEC 61290-11-2 NOTE Harmonized as EN 61290-11-2.
IEC 61300-3-32 NOTE Harmonized as EN 61300-3-32.
2

---------------------- Page: 4 ----------------------

SIST EN 60793-1-48:2018
EN 60793-1-48:2017
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way
...