iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

EN 60464-3-2:2001/A1:2006

(Amendment)

Varnishes used for electrical insulation - Part 3: Specifications for individual materials - Sheet 2: Hot curing impregnating varnishes

Varnishes used for electrical insulation - Part 3: Specifications for individual materials - Sheet 2: Hot curing impregnating varnishes

Elektroisolierlacke - Teil 3: Bestimmungen für einzelne Materialien - Blatt 2: Heißhärtende Tränklacke

Vernis utilisés pour l'isolation électrique - Partie 3: Spécifications pour matériaux particuliers - Feuille 2: Vernis d'imprégnation durcissant à chaud

Laki za električno izolacijo – 3. del: Specifikacije za posamezne materiale – List 2: Laki za impregnacijo z vročo vulkanizacijo (IEC 60464-3-2:2001/A1:2006)

General Information

Status
Published
Publication Date
06-Jun-2006
Withdrawal Date
30-Apr-2009
ICS
29.035.01 - Insulating materials in general
Technical Committee
CLC/SR 15 - Insulating materials
Drafting Committee
IEC/TC 15 - IEC_TC_15
Parallel Committee
IEC/TC 15 - IEC_TC_15
Current Stage
6060 - Document made available - Publishing
Start Date
07-Jun-2006
Completion Date
07-Jun-2006
Ref Project
SIST EN 60464-3-2:2002/A1:2006 - Varnishes used for electrical insulation -- Part 3: Specifications for individual materials -- Sheet 2: Hot curing impregnating varnishes

Relations

Amends
EN 60464-3-2:2001 - Varnishes used for electrical insulation - Part 3: Specifications for individual materials - Sheet 2: Hot curing impregnating varnishes
Effective Date
29-Jan-2023

Buy Standard

EN 60464-3-2:2002/A1:2006EN 60464-3-2:2002/A1:2006
PreviousNext
Amendment
EN 60464-3-2:2002/A1:2006
English language
4 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI SIST EN 60464-3-
2:2002/A1:2006
STANDARD
oktober 2006
Laki za električno izolacijo – 3. del: Specifikacije za posamezne materiale –
List 2: Laki za impregnacijo z vročo vulkanizacijo (IEC 60464-3-
2:2001/A1:2006)
Varnishes used for electrical insulation – Part 3: Specifications for individual
materials – Sheet 2: Hot curing impregnating varnishes (IEC 60464-3-
2:2001/A1:2006)
ICS 29.035.60 Referenčna številka
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

INTERNATIONAL IEC
STANDARD 60464-3-2
AMENDMENT 1
2006-04
Amendment 1
Varnishes used for electrical insulation–
Part 3:
Specifications for individual materials –
Sheet 2: Hot curing impregnating varnishes
 IEC 2006 Droits de reproduction réservés  Copyright - all rights reserved
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch
PRICE CODE
Commission Electrotechnique Internationale B

International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
For price, see current catalogue
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN IEC 60893-2:2023(Main)
Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 2: Methods of test
SIST EN IEC 60893-2:2024

IEC 60893-2:2023 is available as IEC 60893-2:2023 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60893-2:2023 describes methods of test for the materials defined in IEC 60893-1 (referred to also as Part 1). This third edition cancels and replaces the second edition published in 2003. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) removal of reference to withdrawn specification IEC 60167:1964; b) inclusion of reference to IEC 62631-3-3:2015, which supersedes IEC 60167:1964. Details in 6.3 have been updated accordingly. The actual performance of the test has not changed; c) normative references have been updated.

  • Standard
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60626-1:2023(Main)
Combined flexible materials for electrical insulation - Part 1: Definitions and general requirements
SIST EN IEC 60626-1:2024

IEC 60626-1:2023 is available as IEC 60626-1:2023 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition. IEC 60626-1:2023 contains the definitions related to and the general requirements to be fulfilled by combined flexible materials for electrical insulation. This document does not include mica papers used as a primary component, which are covered by the IEC 60371 series, but insulation materials based on mica paper can be used as component of a combined flexible material. Materials which conform to this specification meet established levels of performance. However, the selection of material by a user for a specific application is based on the actual requirements necessary for adequate performance in that application and not based on this specification alone. This fourth edition cancels and replaces the third edition published in 2009. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) the materials available for use within this series of standards have been updated; b) a framework has been created to allow test methods beyond those used for quality control specifications to allow for testing for qualification purposes.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60455-2:2023(Main)
Resin based reactive compounds used for electrical insulation - Part 2: Methods of test
SIST EN IEC 60455-2:2024

IEC 60455-2:2023 is available as IEC 60455-2:2023 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60455-2:2023 specifies methods of test to be used for testing resin based reactive compounds, their components and cured compounds used for electrical insulation. This fourth edition cancels and replaces the third edition published in 2015. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) Introduction of test methods related to IEC 60455-3-8; b) Additional and updated test methods for resins.

  • Standard
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60455-3-8:2021(Main)
Resin based reactive compounds used for electrical insulation - Part 3-8: Specifications for individual materials - Resins for cable accessories
SIST EN IEC 60455-3-8:2021

IEC 60455-3-8:2021 is available as IEC 60455-3-8:2021 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60455-3-8:2021 gives the requirements for resins for power cable accessories that conform to this specification and meet established levels of performance. However, the selection of a material by a user for a specific application will be based on the actual requirements necessary for adequate performance in that application and not on this specification alone. These materials are designed to be used in low and medium voltage cable accessories and as such, electrical performance is proven as part of the assembly. Examples of this are described in EN 50393 and IEC 60502-4. This second edition cancels and replaces the first edition published in 2013. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - Clause 1: a link to assemblies according to IEC 60502-4 and EN 50393 was introduced; - designation: the categories, especially the mechanical ones, were redefined; - type tests: the testing was updated based on the chemical basis of the material; - type tests: additional materials were introduced; - Annex A: an examination grid was established.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62677-3-103:2019(Main)
Heat-shrinkable low and medium voltage moulded shapes - Part 3: Specification for individual materials - Sheet 103: Heat-shrinkable, polyolefin, conductive moulded shapes for medium voltage applications
SIST EN IEC 62677-3-103:2019

IEC 62677-3-103:2019 is applicable to heat shrinkable low and medium voltage moulded shapes, conductive, in a range of configurations suitable for environmental sealing, mechanical protection, strain relief for power cable terminations, joints and stop ends. These moulded shapes have been found suitable for use for temperatures between -40 ºC and 100 ºC. The moulded shapes can be supplied with a pre-coated adhesive. A guide to adhesive compatibility and temperature performance is given in Annex A. The manufacturers/suppliers can be consulted for options. Materials which conform to this specification meet established levels of performance. However, the selection of a material by a user for a specific application will need to be based on the actual requirements necessary for adequate performance in that application and not based on this specification alone. The tests specified are designed to control the quality of the moulded shapes but it is recognized that they are designed to be used in low and medium voltage cable accessories and as such electrical performance will be proven as part of the assembly. Examples of this are described in EN 50393, HD 629 and IEC 60502 (all parts). Keywords: heat shrinkable, polyolefin, conductive moulded shapes for medium voltage applications

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62677-3-102:2018(Main)
Heat-shrinkable low and medium voltage moulded shapes - Part 3: Specification for individual materials - Sheet 102: Heat-shrinkable, polyolefin, anti-tracking moulded shapes for medium voltage applications
SIST EN IEC 62677-3-102:2018

IEC 62677-3-102:2018 is applicable to heat shrinkable medium voltage moulded shapes in a range of configurations suitable for insulation, environmental sealing, mechanical protection, strain relief for power cable terminations, joints and stop ends. These moulded shapes have been found suitable for use for temperatures between -40 °C and 100 °C. The moulded shapes can be supplied with a pre-coated adhesive. A guide to adhesive compatibility and temperature performance is given in Annex A. The manufacturers/suppliers can be consulted for options. Materials which conform to this document meet established levels of performance. However, the selection of a material by a user for a specific application will be based on the actual requirements necessary for adequate performance in that application and will not be based on this document alone. The tests specified are designed to control the quality of the moulded shapes but it is recognized that they are designed to be used in low and medium voltage cable accessories and as such electrical performance will be proven as part of the assembly. Examples of this are described in IEC 60502 (all parts), EN 50393 and HD 629. Keywords: Heat-shrinkable, polyolefin, anti-tracking moulded shapes for medium voltage applications

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62677-3-101:2018(Main)
Heat-shrinkable low and medium voltage moulded shapes - Part 3: Specification for individual materials - Sheet 101: Heat-shrinkable, polyolefin moulded shapes for low voltage applications
SIST EN IEC 62677-3-101:2018

IEC 62677-3-101:2018 is applicable to heat shrinkable low voltage moulded shapes in a range of configurations suitable for insulation, environmental sealing, mechanical protection, strain relief for power cable terminations, joints and stop ends. These moulded shapes have been found suitable for use for temperatures between -40 °C and 100 °C. The moulded shapes can be supplied with a pre-coated adhesive. A guide to adhesive compatibility and temperature performance is given in Annex A. The manufacturers/suppliers can be consulted for options. The material is available in two types: - Type A - Flame retardant - Type B - Not flame retardant Materials which conform to this document meet established levels of performance. However, the selection of a material by a user for a specific application will be based on the actual requirements necessary for adequate performance in that application and will not be based on this document alone. The tests specified are designed to control the quality of the moulded shapes but it is recognized that they are designed to be used in low and medium voltage cable accessories and, as such, electrical performance will be proven as part of the assembly. Examples of this are described in EN 50393, HD 629 and IEC 60502-1. Keywords: Heat-shrinkable, polyolefin moulded shapes for low voltage applications

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60370:2018(Main)
Test procedure for thermal endurance of insulating resins and varnishes for impregnation purposes - Electric breakdown methods
SIST EN IEC 60370:2018

This International Standard covers methods of test for the determination of thermal endurance (temperature index) of electrical insulating resins and varnishes for impregnation purposes. It is done by means of impregnating glass cloth and measuring electric strength or breakdown voltage before and after heat ageing. It covers the materials described in IEC 60455-3-5 and IEC 60464-3-2 and similar materials.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62677-1:2018(Main)
Heat shrinkable low and medium voltage moulded shapes - Part 1: General requirements
SIST EN IEC 62677-1:2018

IEC 62677-1:2017 is applicable to heat shrinkable low and medium voltage moulded shapes in a range of configurations and materials suitable for insulation, environmental sealing, mechanical protection, electrical conductance, anti-tracking and strain relief for power cable terminations, joints and stop ends. It specifies the test methods and material requirements. The most commonly available shapes are as shown in the Annex A. Materials which conform to this document meet established levels of performance. However, the selection of a material by a user for a specific application will be based on the actual requirements necessary for adequate performance in that application and will not be based on this document alone. These moulded shapes are designed to be used in low and medium voltage cable accessories and as such electrical performance will be proven as part of the assembly. Examples of this are described in EN 50393, HD 629.1 and IEC 60502-4.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62677-2:2018(Main)
Heat shrinkable low and medium voltage moulded shapes - Part 2 Methods of test
SIST EN IEC 62677-2:2018

IEC 62677-2:2017 gives methods of test for heat shrinkable low and medium voltage moulded shapes in a range of configurations and materials suitable for insulation, environmental sealing, mechanical protection and strain relief for connector/cable terminations and multi-way transitions. The tests specified are designed to control the quality of the moulded shapes but it is recognized that they are designed to be used in low and medium voltage cable accessories and as such electrical performance will be proven as part of the assembly. Examples of this are described in EN 50393, HD 629.1 and IEC 60502-4.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day