EN 60601-2-39:2008
(Main)Medical electrical equipment - Part 2-39: Particular requirements for basic safety and essential performance of peritoneal dialysis equipment
Medical electrical equipment - Part 2-39: Particular requirements for basic safety and essential performance of peritoneal dialysis equipment
Applies to the basic safety and essential performance of peritoneal dialysis medical electrical equipment. It applies to peritoneal dialysis equipment intended for use either by medical staff or under the supervision of medical experts, including peritoneal dialysis equipment operated by the patient, regardless of whether the peritoneal dialysis equipment is used in a hospital or domestic environment. This second edition cancels and replaces the first edition of IEC 60601-2-39. It constitutes a technical revision. Major changes since the last edition include a summary of additional essential performance requirements.
Medizinische elektrische Geräte - Teil 2-39: Besondere Festlegungen für die Sicherheit einschließlich der wesentlichen Leistungsmerkmale von Peritoneal-Dialyse-Geräten
Appareils électromédicaux - Partie 2-39: Exigences particulières pour la sécurité de base et les performances essentielles des appareils de dialyse péritonéale
S'applique à la sécurité de base et aux performances essentielles des appareils électromédicaux de dialyse péritonéale. Elle s'applique aux appareils de dialyse péritonéale destinés à être utilisés soit par le personnel médical soit sous la supervision d'experts médicaux, y compris les appareils de dialyse péritonéalemis en fonctionnement par le patient, que l'appareil de dialyse péritonéale soit utilisé dans un hôpital ou dans un environnement domestique. Cette seconde édition annule et remplace la première édition de la CEI 60601-2-39 dont elle constitue une révision technique. Les changements principaux depuis la dernière édition incluent un résumé des exigences de performances essentielles.
Medicinska električna oprema - 2-39. del: Posebne zahteve za osnovno varnost in bistvene lastnosti opreme za trebušno dializo (IEC 60601-2-39:2007)
Ta mednarodni standard velja za OSNOVNO VARNOST in BISTVENE LASTNOSTI ME OPREME ZA TREBUŠNO DIALIZO, kot je določeno v 201.3.208, v nadaljevanju PD OPREMA. Velja za PD OPREMO, ki jo uporablja medicinsko osebje ali je pod nadzorom medicinskih strokovnjakov, vključno s PD OPREMO, ki jo upravlja BOLNIK, ne glede na to, ali je PD OPREMA uporabljena v bolniškem ali domačem okolju. Če bo točka ali podtočka izrecno namenjena samo uporabi za ME OPREMO ali samo za ME SISTEME, bosta naslov in vsebina te točke ali podtočke to tudi navedla. Sicer točka in podtočka veljata za ustrezno ME OPREMO in ME SISTEME. NEVARNOSTI, ki so del fiziološkega delovanja ME OPREME ali ME SISTEMOV v okviru uporabe tega standarda, niso zajete s posebnimi zahtevami tega standarda, razen v točkah 7.2.13 in 8.4.1 splošnega standarda.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Medical electrical equipment - Part 2-39: Particular requirements for basic safety and essential performance of peritoneal dialysis equipment (IEC 60601-2-39:2007)Appareils électromédicaux - Partie 2-39: Exigences particulières pour la sécurité de base et les performances essentielles des appareils de dialyse péritonéale
(CEI 60601-2-39:2007)Medizinische elektrische Geräte - Teil 2-39: Besondere Festlegungen für die Sicherheit einschließlich der wesentlichen Leistungsmerkmale von Peritoneal-Dialyse-Geräten
(IEC 60601-2-39:2007)11.040.99Druga medicinska opremaOther medical equipmentICS:SIST EN 60601-2-39:2008enTa slovenski standard je istoveten z:EN 60601-2-39:200801-julij-2008SIST EN 60601-2-39:2008SLOVENSKI
STANDARDSIST EN 60601-2-39:20021DGRPHãþD
EUROPEAN STANDARD EN 60601-2-39 NORME EUROPÉENNE
EUROPÄISCHE NORM April 2008
CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2008 CENELEC -
All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60601-2-39:2008 E
ICS 11.040.99 Supersedes EN 60601-2-39:1999
English version
Medical electrical equipment -
Part 2-39: Particular requirements for basic safety
and essential performance of peritoneal dialysis equipment
(IEC 60601-2-39:2007)
Appareils électromédicaux -
Partie 2-39: Exigences particulières
pour la sécurité de base
et les performances essentielles
des appareils de dialyse péritonéale (CEI 60601-2-39:2007)
Medizinische elektrische Geräte -
Teil 2-39: Besondere Festlegungen
für die Sicherheit einschließlich
der wesentlichen Leistungsmerkmale
von Peritoneal-Dialyse-Geräten (IEC 60601-2-39:2007)
This European Standard was approved by CENELEC on 2008-03-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
- 2 - Foreword The text of document 62D/555/CDV, future edition 2 of IEC 60601-2-39, prepared by SC 62D, Electromedical equipment, of IEC TC 62, Electrical equipment in medical practice, was submitted to the IEC-CENELEC Parallel Unique Acceptance Procedure and was approved by CENELEC as
EN 60601-2-39 on 2008-03-01. This European Standard supersedes EN 60601-2-39:1999 + corrigendum December 1999. Major changes since EN 60601-2-39:1999 include a summary of additional essential performance requirements. The following dates were fixed: – latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement
(dop) 2008-12-01 – latest date by which the national standards conflicting
with the EN have to be withdrawn
(dow) 2011-03-01 This European Standard has been prepared under a mandate given to CENELEC by the European Commission and the European Free Trade Association and covers essential requirements of EC Directive 93/42/EEC. See Annex ZZ. In this standard, the following print types are used: − requirements and definitions: in roman type; − test specifications: in italic type; − informative material appearing outside of tables, such as notes, examples and references: in smaller type. Normative text of tables is also in a smaller type; − TERMS DEFINED IN CLAUSE 3 OF THE GENERAL STANDARD, IN THIS PARTICULAR STANDARD OR AS NOTED: IN SMALL CAPITALS. In referring to the structure of this standard, the term – “clause” means one of the seventeen numbered divisions within the table of contents, inclusive of all subdivisions (e.g. Clause 7 includes Subclauses 7.1, 7.2, etc.); –
“subclause” means a numbered subdivision of a clause (e.g. 7.1, 7.2 and 7.2.1 are all subclauses of Clause 7). References to clauses within this standard are preceded by the term “Clause” followed by the clause number. References to subclauses within this standard are by number only.
In this standard, the conjunctive “or” is used as an “inclusive or” so a statement is true if any combination of the conditions is true. The verbal forms used in this standard conform to usage described in Annex H of the ISO/IEC Directives, Part 2. For the purposes of this standard, the auxiliary verb − “shall” means that compliance with a requirement or a test is mandatory for compliance with this standard; − “should” means that compliance with a requirement or a test is recommended but is not mandatory for compliance with this standard; − “may” is used to describe a permissible way to achieve compliance with a requirement or test. An asterisk (*) as the first character of a title or at the beginning of a paragraph or table title indicates that there is guidance or rationale related to that item in Annex AA.
- 3 - EN 60601-2-39:2008
Annexes ZA and ZZ have been added by CENELEC. __________ Endorsement notice The text of the International Standard IEC 60601-2-39:2007 was approved by CENELEC as a European Standard without any modification. __________
- 4 -
Annex ZA
(normative)
Normative references to international publications with their corresponding European publications
Addition to Annex ZA of EN 60601-1:2006: Publication Year Title EN/HD Year IEC 60601-1-9 2007 Medical electrical equipment -
Part 1-9: General requirements for basic safety and essential performance - Collateral Standard: Requirements for environmentally conscious design EN 60601-1-9 2008
IEC 60601-1-10 2007 Medical electrical equipment -
Part 1-10: General requirements for basic safety and essential performance - Collateral Standard: Requirements for the development of physiologic closed-loop controllers EN 60601-1-10 2008
- 5 - EN 60601-2-39:2008
Annex ZZ (informative) Coverage of Essential Requirements of EC Directives
This European Standard has been prepared under a mandate given to CENELEC by the European Commission and the European Free Trade Association and within its scope the standard covers all relevant essential requirements as given in Annex I of the EC Directive 93/42/EEC. Compliance with this standard provides one means of conformity with the specified essential requirements of the Directive concerned. WARNING: Other requirements and other EC Directives may be applicable to the products falling within the scope of this standard.
IEC 60601-2-39Edition 2.0 2007-11INTERNATIONAL STANDARD NORME INTERNATIONALEMedical electrical equipment –
Part 2-39: Particular requirements for basic safety and essential performance of peritoneal dialysis equipment
Appareils électromédicaux –
Partie 2-39: Exigences particulières pour la sécurité de base et les performances essentielles des appareils de dialyse péritonéale
INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE QICS 11.040.99 PRICE CODECODE PRIXISBN 2-8318-9464-6
– 2 – 60601-2-39 © IEC:2007 CONTENTS FOREWORD.3
201.1 Scope, object and related standards.5 201.2 Normative references.6 201.3 Terms and definitions.7 201.4 General requirements.8 201.5 General requirements for testing of PD EQUIPMENT.8 201.6 Classification of ME EQUIPMENT and ME SYSTEMS.8 201.7 PD EQUIPMENT identification, marking and documents.8 201.8 Protection against electrical HAZARDS from PD EQUIPMENT.10 201.9 Protection against mechanical hazards of ME EQUIPMENT and ME SYSTEMS.10 201.10 Protection against unwanted and excessive radiation HAZARDS.10 201.11 Protection against excessive temperatures and other HAZARDS.11 201.12 Accuracy of controls and instruments and protection against hazardous outputs.11 201.13 HAZARDOUS SITUATIONS and fault conditions.13 201.14 PROGRAMMABLE ELECTRICAL MEDICAL SYSTEMS (PEMS).13 201.15 Construction of ME EQUIPMENT.13 201.16 ME SYSTEMS.13 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS.13 202 Electromagnetic compatibility – Requirements and tests.13 203 General requirements for radiation protection in diagnostic X-ray equipment.14 206 Usability.14 208 * General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems.14 209 Requirements for the reduction of environmental impacts.14 210 Process requirements for the development of physiologic closed-loop controllers.14
Annexes.15 Annex G (normative)
Protection against HAZARDS of ignition
of flammable anaesthetic mixtures.15 Annex AA (informative)
Particular guidance and rationale.16
Index of defined terms used in this particular standard.17
60601-2-39 © IEC:2007 – 3 – INTERNATIONAL ELECTROTECHNICAL COMMISSION ____________
MEDICAL ELECTRICAL EQUIPMENT –
Part 2-39: Particular requirements for basic safety and essential performance of peritoneal dialysis equipment
FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International standard IEC 60601-2-39 has been prepared by IEC subcommittee 62D: Electromedical equipment, of IEC technical committee 62: Electrical equipment in medical practice. This second edition cancels and replaces the first edition of IEC 60601-2-39. It constitutes a technical revision. Major chang
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.