EN 61019-2:2005

Surface acoustic wave (SAW) resonators - Part 2: Guide to the use

Gives practical guidance to the use of surface acoustic wave (SAW) resonators which are used in telecommunications, radio equipments and consumer products. Is to be used in conjunction with EN 61019-1. The features of SAW resonators are small size, light weight, adjustment-free and high stability. operating frequencies extend to the VHF and UHF ranges.

Oberflächenwellenresonatoren (OFW-Resonatoren) - Teil 2: Leitfaden für die Anwendung

Résonateurs à ondes acoustiques de surface (OAS) - Partie 2: Guide d'emploi

Gives practical guidance to the use of surface acoustic wave (SAW) resonators which are used in telecommunications, radio equipments and consumer products. Is to be used in conjunction with EN 61019-1. The features of SAW resonators are small size, light weight, adjustment-free and high stability. operating frequencies extend to the VHF and UHF ranges.

Resonatorji za površinske akustične valove – 2. del: Vodilo za uporabo (IEC 61019-2:2004)

General Information

• Status: Published
• Publication Date: 21-Jun-2005
• Withdrawal Date: 31-May-2008
• ICS: 31.140 - Piezoelectric devices
• Technical Committee: CLC/SR 49 - Piezoelectric and dielectric devices for frequency control and selection
• Drafting Committee: IEC/TC 49 - IEC_TC_49
• Parallel Committee: IEC/TC 49 - IEC_TC_49
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 22-Jun-2005
• Completion Date: 22-Jun-2005
• Ref Project: SIST EN 61019-2:2005 - Surface acoustic wave (SAW) resonators -- Part 2: Guide to the use

Relations

• Replaces: EN 61019-2:1997 - Surface acoustic wave (SAW) resonators - Part 2: Guide to the use
• Effective Date: 29-Jan-2023

Standards Content (Sample)

SLOVENSKI SIST EN 61019-1:2005

STANDARD
december 2005
Resonatorji za površinske akustične valove – 1. del: Generična specifikacija
(IEC 61019-1:2004)
Surface acoustic wave (SAW) resonators – Part 1: Generic specification (IEC
61019-1:2004)
ICS 31.140 Referenčna številka
SIST EN 61019-1:2005(en)
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

EUROPEAN STANDARD EN 61019-2
NORME EUROPÉENNE
EUROPÄISCHE NORM June 2005
ICS 31.140 Supersedes EN 61019-2:1997

English version
Surface acoustic wave (SAW) resonators
Part 2: Guide to the use
(IEC 61019-2:2005)
Résonateurs à ondes acoustiques  Oberflächenwellenresonatoren
de surface (OAS) (OFW-Resonatoren)
Partie 2: Guide d'emploi Teil 2: Leitfaden für die Anwendung
(CEI 61019-2:2005) (IEC 61019-2:2005)

This European Standard was approved by CENELEC on 2005-06-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden,
Switzerland and United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels

© 2005 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 61019-2:2005 E
Foreword
The text of document 49/714/FDIS, future edition 2 of IEC 61019-2, prepared by IEC TC 49,
Piezoelectric and dielectric devices for frequency control and selection, was submitted to the
IEC-CENELEC parallel vote and was approved by CENELEC as EN 61019-2 on 2005-06-01.
This European Standard supersedes EN 61019-2:1997.
The main changes with respect to EN 61019-2:1997 are listed below:
– at the end of 5.1, the edge reflector has been added. Its reference literature has been inserted in
the bibliography;
– in Table 1, the propagation properties of LiNbO3 (64° Y) have been added;
– in Table 3, the clause and subclause numbers have been corrected in order to be consistent with
EN 61019-1:2005.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2006-03-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2008-06-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61019-2:2005 was approved by CENELEC as a European
Standard without any modification.
__________
- 3 - EN 61019-2:2005
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE Where an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
IEC 61019-1 2004 Surface acoustic wave (SAW) resonators EN 61019-1 2005
Part 1: Generic specification
IEC 61019-3 1991 Part 3: Standard outlines and lead - -
connections
INTERNATIONAL IEC
STANDARD 61019-2
Second edition
2005-05
Surface acoustic wave (SAW) resonators –
Part 2:
Guide to the use
 IEC 2005  Copyright - all rights reserved
No part of this publication may be reproduced or utilized in any form or by any means, electronic or
mechanical, including photocopying and microfilm, without permission in writing from the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: [phone] Telefax: [phone] E-mail: [e-mail] Web: www.iec.ch
PRICE CODE
Commission Electrotechnique Internationale U
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
For price, see current catalogue

– 2 – 61019-2  IEC:2005(E)
CONTENTS
FOREWORD.3
INTRODUCTION.5

1 Scope.6
2 Normative references .6
3 Technical considerations .6
4 Fundamentals of SAW resonators.7
4.1 Basic structure .7
4.2 Principle of operation .7
5 SAW resonator characteristics.8
5.1 Reflector characteristics .8
5.2 SAW resonator characteristics.10
5.3 Spurious modes .14
5.4 Substrate materials and their characteristics .15
5.5 Available characteristics.17
6 Application guide.19
6.1 Oscillator circuits and oscillation condition .19
6.2 Practical remarks for oscillator applications.21
7 Checklist of SAW resonator parameters for drawing up specifications .22

Bibliography.25

61019-2  IEC:2005(E) – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
SURFACE ACOUSTIC WAVE (SAW) RESONATORS –

Part 2: Guide to the use
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 61019-2 has been prepared by IEC technical committee 49:
Piezoelectric and dielectric devices for frequency control and selection.
This second edition cancels and replaces the first edition published in 1995. This edition
constitutes a technical revision.
The main changes with respect to the previous editon are listed below:
• at the end of 5.1, the edge reflector has been added. Its reference literature has been
inserted in the bibliography;
• in Table 1, the propagation properties of LiNbO (64° Y) have been added;
• in Table 3, the clause and subclause numbers have been corrected in order to be
consistent with IEC 61019-1 (2004) which has replaced IEC 61019-1-1 (1990) and IEC
61019-1-2 (1993).
– 4 – 61019-2  IEC:2005(E)
The text of this standard is based on the following documents:
FDIS Report on voting
49/714/FDIS 49/723/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
IEC 61019 consists of the following parts, under the general title Surface acoustic wave
(SAW) resonators
Part 1: Generic information
Part 2: Guide to the use
Part 3: Standard outlines and lead connections
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
The committee has decided that the contents of this publication will remain unchanged until
the maintenance result date indicated on the IEC web site under "http://webstore.iec.ch" in
the data related to the specific publication. At this date, the publication will be
• reconfirmed;
• withdrawn;
• replaced by a revised edition, or
• amended.
A bilingual version of this publication may be issued at a later date.

61019-2  IEC:2005(E) – 5 –
INTRODUCTION
This part of IEC 61019 gives practical guidance to the use of SAW resonators which are used
in telecommunications, radio equipments and consumer products. IEC 61019-1 can be referred
to for general information, standard values and test conditions.
The features of these SAW resonators are small size, light weight, adjustment-free and high
stability. In addition, the operating frequency of SAW resonators extends to the VHF and UHF
ranges.
This part has been compiled in response to a generally expressed desire on the part of both
users and manufacturers for a guide to the use of SAW resonators, so that the resonators
may be used to their best advantage. To this end, general and fundamental characteristics
have been explained in this guide.

– 6 – 61019-2  IEC:2005(E)
SURFACE ACOUSTIC WAVE (SAW) RESONATORS –

Part 2: Guide to the use
1 Scope
SAW resonators are now widely used in a variety of applications: VCR RF-converters, CATV
local oscillators, measuring equipment, remote control and so on. While SAW resonators are
also applied to narrow bandwidth filters, the scope of this part of IEC 61019 is limited to SAW
resonators for oscillator applications
It is not the aim of this guide to explain theory, nor to attempt to cover all the eventualities
which may arise in practical circumstances. This guide draws attention to some of the more
fundamental questions, which should be considered by the user before he places an order for
a SAW resonator for a new application. Such a procedure will be the user's insurance against
unsatisfactory performance.
Standard specifications, such as those of the IEC of which this guide forms a part, and
national specifications or detail specifications issued by manufacturers, will define the
available combinations of resonance frequency, quality factor, motional resistance, parallel
capacitance, etc. These spe
...