EN IEC 62005-9-4:2018
(Main)Fibre optic interconnecting devices and passive components - Reliability - Part 9-4: High power qualification of passive optical components for environmental category C
Fibre optic interconnecting devices and passive components - Reliability - Part 9-4: High power qualification of passive optical components for environmental category C
IEC 62005-9-4:2018(E) gives the requirements for the reliability qualification of passive optical components when used in high optical power applications for the environmental category C. Keywords: reliability assurance at high optical power, environmental category C
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Zuverlässigkeit - Teil 9-4: Qualifizierung von passiven optischen Bauteilen für Umgebungskategorie C für den Einsatz bei hohen optischen Leistungen
Dispositifs d'interconnexion et composants passifs fibroniques - Fiabilité - Partie 9-4: Qualification de puissance élevée des composants optiques passifs pour la catégorie environnementale C
IEC 62005-9-4:2018 traite des exigences de qualification de fiabilité de composants optiques passifs en ce qui concerne leur utilisation dans des applications à puissance optique élevée pour la catégorie environnementale C. Mots clés: l'assurance de la fiabilité à puissance optique élevée, catégorie environnementale C
Optični spojni elementi in pasivne komponente - Zanesljivost - 9-4. del: Razvrščanje pasivnih optičnih komponent visokih moči za okoljsko kategorijo C (IEC 62005-9-4:2018)
Ta del standarda IEC 62005 določa zahteve za razvrščanje zanesljivosti pasivnih optičnih
komponent, kadar se uporabljajo pri visoki optični moči, za okoljsko kategorijo C.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-januar-2019
2SWLþQLVSRMQLHOHPHQWLLQSDVLYQHNRPSRQHQWH=DQHVOMLYRVW GHO
5D]YUãþDQMHSDVLYQLKRSWLþQLKNRPSRQHQWYLVRNLKPRþL]DRNROMVNRNDWHJRULMR&
,(&
Fibre optic interconnecting devices and passive components - Reliability - Part 9-4: High
power qualification of passive optical components for environmental category C (IEC
62005-9-4:2018)
Ta slovenski standard je istoveten z: EN IEC 62005-9-4:2018
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN IEC 62005-9-4
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2018
ICS 33.180.20
English Version
Fibre optic interconnecting devices and passive components -
Reliability - Part 9-4: High power qualification of passive optical
components for environmental category C
(IEC 62005-9-4:2018)
Dispositifs d'interconnexion et composants passifs Lichtwellenleiter - Verbindungselemente und passive
fibroniques - Fiabilité - Partie 9-4: Qualification de Bauteile - Zuverlässigkeit - Teil 9-4: Qualifizierung von
puissance élevée des composants optiques passifs pour la passiven optischen Bauteilen für Umgebungskategorie C
catégorie environnementale C für den Einsatz bei hohen optischen Leistungen
(IEC 62005-9-4:2018) (IEC 62005-9-4:2018)
This European Standard was approved by CENELEC on 2018-08-29. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 62005-9-4:2018 E
European foreword
The text of document 86B/4130/FDIS, future edition 1 of IEC 62005-9-4, prepared by SC 86B "Fibre
optic interconnecting devices and passive components" of IEC/TC 86 "Fibre optics" was submitted to
the IEC-CENELEC parallel vote and approved by CENELEC as EN IEC 62005-9-4:2018.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2019-05-29
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2021-08-29
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 62005-9-4:2018 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 60825 (series) NOTE Harmonized as EN 60825 (series)
IEC 61291-5-2 NOTE Harmonized as EN 61291-5-2
IEC 61300-2-48 NOTE Harmonized as EN 61300-2-48
IEC 61300-3-2 NOTE Harmonized as EN 61300-3-2
IEC 61300-3-6 NOTE Harmonized as EN 61300-3-6
IEC 61300-3-7 NOTE Harmonized as EN 61300-3-7
IEC 61300-3-20 NOTE Harmonized as EN 61300-3-20
IEC 61753-1 NOTE Harmonized as EN 61753-1
IEC 62074-1 NOTE Harmonized as EN 62074-1
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 61300 series Fibre optic interconnecting devices and passive EN 61300 series
components - Basic test and measurement
procedures
IEC 61300-1 - Fibre optic interconnecting devices and passive EN 61300-1 -
components - Basic test and measurement
procedures - Part 1: General and guidance
IEC 61300-2-14 - Fibre optic interconnecting devices and passive EN 61300-2-14 -
components - Basic test and measurement
procedures - Part 2-14: Tests - High optical power
IEC 61300-2-19 - Fibre optic interconnecting devices and passive EN 61300-2-19 -
components - Basic test and measurement
procedures - Part 2-19: Tests - Damp heat (steady
state)
IEC 61300-2-22 - Fibre optic interconnecting devices and passive EN 61300-2-22 -
components - Basic test and measurement
procedures - Part 2-22: Tests - Change of
temperature
IEC 61300-3-1 - Fibre optic interconnecting devices and passive EN 61300-3-1 -
components - Basic test and measurement
procedures - Part 3-1: Examinations and
measurements - Visual examination
IEC 61300-3-35 - Fibre optic interconnecting devices and passive EN 61300-3-35 -
components - Basic test and measurement
procedures - Part 3-35: Examinations and
measurements - Visual inspection of fibre optic
connectors and fibre-stub transceivers
IEC 62005-9-1 - Fibre optic interconnecting devices and passive EN 62005-9-1 -
components - Reliability - Part 9-1: Qualification of
passive optical components
IEC 62005-9-4 ®
Edition 1.0 2018-07
INTERNATIONAL
STANDARD
Fibre optic interconnecting devices and passive components – Reliability –
Part 9-4: High power qualification of passive optical components for
environmental category C
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 33.180.20 ISBN 978-2-8322-5908-5
– 2 – IEC 62005-9-4:2018 © 2018
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 High power qualification tests . 7
4.1 Tests . 7
4.2 Sample size . 9
5 Apparatus . 9
5.1 Source (S) . 9
5.2 Detector unit (D) . 9
5.3 Environmental chamber . 9
5.4 Data acquisition system (DAS) . 9
5.5 Temporary joints (TJ) . 9
5.6 Safety devices . 10
6 Test procedure . 10
6.1 Preconditioning . 10
6.2 Damp heat and post damp heat high optical power exposure . 10
6.2.1 Initial optical measurements . 10
6.2.2 Damp heat test . 10
6.2.3 Optical measurements following damp heat test . 10
6.2.4 Post damp heat exposure to high optical power . 10
6.2.5 Optical measurements following damp heat and high power exposure . 10
6.3 Temperature cycling and post temperature cycling high optical power
exposure . 10
6.3.1 Initial optical measurements . 10
6.3.2 Temperature cycling test . 10
6.3.3 Optical measurements following temperature cycling test . 11
6.3.4 Post temperature cycling exposure to high optical power . 11
6.3.5 Optical measurements following temperature cycling and high power
exposure . 11
6.4 High power test (endurance) . 11
6.4.1 Initial optical measurements . 11
6.4.2 Exposure to high optical power (endurance) . 11
6.4.3 Optical measurements following exposure to high power . 11
7 Failure criteria . 11
8 Test report . 11
Bibliography . 12
Table 1 – High power reliability qualification tests for passive optical components and
sample size . 8
IEC 62005-9-4:2018 © 2018 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FIBRE OPTIC INTERCONNECTING DEVICES AND
PASSIVE COMPONENTS – RELIABILITY –
Part 9-4: High power qualification of passive optical components
for environmental category C
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.