EN 60893-3-1:2004

Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-1: Specifications for individual materials - Requirements for types of industrial rigid laminated sheets

Intended as a guide giving the requirements for various materials. Their properties are given in subsequent Part 3 specification sheets. Materials which conform to this specification meet established levels of performance. However, the selection of a material by a user for a specific application should be based on the actual requirements necessary for adequate performance in that application and not based on this specification alone. In this revision of the EN 60893 series of specifications, new material types have been included, changes have been made to the property requirements of some existing types, a new method for testing permittivity and dissipation factor has been added, and all non-specification data for each type has been moved to a new Part 4 document - EN 60893-4: Typical values.

Isolierstoffe - Tafeln aus technischen Schichtpressstoffen auf der Basis warmhärtender Harze für elektrotechnische Zwecke - Teil 3-1: Bestimmungen für einzelne Werkstoffe - Anforderungen für Typen von Tafeln aus technischen Schichtpressstoffen

Matériaux isolants - Stratifiés industriels rigides en planches à base de résines thermodurcissables à usages électriques - Partie 3-1: Spécifications pour matériaux particuliers - Prescriptions pour types de stratifiés industriels en planches

Prévue comme guide indiquant les prescriptions des divers matériaux. Leurs propriétés sont données dans les autres feuilles de spécification de la Partie 3. Les matériaux conformes à la présente spécification satisfont aux niveaux de performances établis. Cependant, il convient que le choix d'un matériau, par un utilisateur, pour une application spécifique, soit fondé sur les prescriptions réelles nécessaires pour obtenir les performances satisfaisantes pour cette application, et qu'il ne soit pas fondé sur cette seule spécification. Dans cette révision de la série de spécifications EN 60893, de nouveaux matériaux ont été introduits, des modifications ont été faites aux prescriptions pour les propriétés de certains types existants, une nouvelle méthode pour l'essai de la permittivité et du facteur de dissipation a été ajoutée et, pour chaque type, les valeurs n'étant pas des spécifications ont été déplacées dans un nouveau document de Partie 4 - EN 60893-4: Valeurs typiques.

Izolacijski materiali - Industrijske toge laminirane plošče iz smol s toplotnim utrjevanjem za električne namene - 3-1. del: Specifikacije za posamezne materiale - Zahteve za tipe industrijskih togih laminiranih plošč (IEC 60893-3-1:2003)

General Information

• Status: Withdrawn
• Publication Date: 15-Jan-2004
• Withdrawal Date: 30-Nov-2006
• ICS: 29.035.01 - Insulating materials in general
• Technical Committee: CLC/SR 15 - Insulating materials
• Drafting Committee: IEC/TC 15 - IEC_TC_15
• Parallel Committee: IEC/SC 15C - IEC_SC_15C
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 28-Aug-2015
• Completion Date: 28-Aug-2015
• Ref Project: SIST EN 60893-3-1:2004 - Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes -- Part 3-1: Specifications for individual materials - Requirements for types of industrial rigid laminated sheets

Relations

• Replaces: EN 60893-3-1:1994/A1:1997 - Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Types of industrial rigid laminated sheets
• Effective Date: 29-Jan-2023
• Replaces: EN 60893-3-1:1994 - Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Types of industrial rigid laminated sheets
• Effective Date: 29-Jan-2023
• Replaced By: EN 60893-3-1:2012 - Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-1: Specifications for individual materials - Types of industrial rigid laminated sheets
• Effective Date: 29-Jan-2023

Standards Content (Sample)

SLOVENSKI SIST EN 60893-3-1:2004

STANDARD
september 2004
Izolacijski materiali - Industrijske toge laminirane plošče iz smol s toplotnim
utrjevanjem za električne namene - 3-1. del: Specifikacije za posamezne
materiale - Zahteve za tipe industrijskih togih laminiranih plošč (IEC 60893-3-
1:2003)
Insulating materials - Industrial rigid laminated sheets based on thermosetting
resins for electrical purposes - Part 3-1: Specifications for indivdual materials -
Requirements for types of industrial rigid laminated sheets (IEC 60893-3-1:2003)
ICS 29.035.20 Referenčna številka
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

EUROPEAN STANDARD EN 60893-3-1
NORME EUROPÉENNE
EUROPÄISCHE NORM January 2004

ICS 29.035.01 Supersedes EN 60893-3-1:1994 + A1:1997

English version
Insulating materials –
Industrial rigid laminated sheets
based on thermosetting resins for electrical purposes
Part 3-1: Specifications for individual materials –
Requirements for types of industrial rigid laminated sheets
(IEC 60893-3-1:2003)
Matériaux isolants –  Isolierstoffe –
Stratifiés industriels rigides en planches Tafeln aus technischen Schichtpress-
à base de résines thermodurcissables stoffen auf der Basis warmhärtender
à usages électriques Harze für elektrotechnische Zwecke
Partie 3-1: Spécifications pour matériaux Teil 3-1: Bestimmungen für einzelne
particuliers – Werkstoffe –
Prescriptions pour types de stratifiés Anforderungen für Typen von Tafeln
industriels en planches aus technischen Schichtpressstoffen
(CEI 60893-3-1:2003) (IEC 60893-3-1:2003)

This European Standard was approved by CENELEC on 2003-12-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland
and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels

© 2004 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 60893-3-1:2004 E
Foreword
The text of document 15C/1521/FDIS, future edition 2 of IEC 60893-3-1, prepared by SC 15C,
Specifications, of IEC TC 15, Insulating materials, was submitted to the IEC-CENELEC parallel vote
and was approved by CENELEC as EN 60893-3-1 on 2003-12-01.
This European Standard supersedes EN 60893-3-1:1994 + A1:1997.
In this revision of the EN 60893 series of specifications, new material types have been included,
changes have been made to the property requirements of some existing types, a new method for
testing permittivity and dissipation factor has been added, and all non-specification data for each type
has been moved to a new Part 4 document – IEC/TR 60893-4: Typical values.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2004-09-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2006-12-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60893-3-1:2003 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 60893-3     NOTE Harmonized in EN 60893-3 series (not modified).
__________
- 3 - EN 60893-3-1:2004
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
1) 1)
IEC 60893-1 - Insulating materials - Industrial rigid EN 60893-1 -
laminated sheets based on
thermosetting resins for electrical
purposes
Part 1: Definitions, designations and
general requirements
2) 1)
IEC 60893-2 - Part 2: Methods of test EN 60893-2 -

1)
To be published.
2)
Undated reference.
NORME
CEI
INTERNATIONALE IEC
60893-3-1
INTERNATIONAL
Deuxième édition
STANDARD
Second edition
2003-11
Matériaux isolants –
Stratifiés industriels rigides en planches
à base de résines thermodurcissables
à usages électriques –
Partie 3-1:
Spécifications pour matériaux particuliers –
Prescriptions pour types de stratifiés
industriels en planches
Insulating materials –
Industrial rigid laminated sheets based on
thermosetting resins for electrical purposes –
Part 3-1:
Specifications for individual materials –
Requirements for types of industrial
rigid laminated sheets
© IEC 2003 Droits de reproduction réservés ⎯ Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including
électronique ou mécanique, y compris la photocopie et les photocopying and microfilm, without permission in writing from
microfilms, sans l'accord écrit de l'éditeur. the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: [phone] Telefax: [phone] E-mail: [e-mail]  Web: www.iec.ch
CODE PRIX
K
Commission Electrotechnique Internationale PRICE CODE
International Electrotechnical Commission
ɆɟɠɞɭɧɚɪɨɞɧɚɹɗɥɟɤɬɪɨɬɟɯɧɢɱɟɫɤɚɹɄɨɦɢɫɫɢɹ
Pour prix, voir catalogue en vigueur
For price, see current catalogue

60893-3-1 © IEC:2003 – 3 –
CONTENTS
FOREWORD . 5
INTRODUCTION .9
1 Scope .11
2 Normative references.11
3 Abbreviations.11
4 Types .13
Bibliography.19

60893-3-1 © IEC:2003 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
___________
INSULATING MATERIALS –
INDUSTRIAL RIGID LAMINATED SHEETS
BASED ON THERMOSETTING RESINS FOR ELECTRICAL PURPOSES –
Part 3-1: Specifications for individual materials −−−−
Requirements for types of industrial rigid laminated sheets
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether d
...