EN 60745-2-18:2004

Hand-held motor-operated electric tools - Safety - Part 2-18: Particular requirements for strapping tools

Deals with the safety of hand-held motor-operated or magnetically driven tools, specific requirements for strapping tools. The rated voltage being not more than 250 V for single-phase a.c. or d.c., and 440 V for three-phase a.c. tools.

Handgeführte motorbetriebene Elektrowerkzeuge - Sicherheit - Teil 2-18: Besondere Anforderungen für Umreifungswerkzeuge

Outils électroportatifs à moteur - Sécurité - Partie 2-18: Règles particulières pour les outils de cerclage

Traite de la sécurité des outils dont la tension assignée n'est pas supérieure à 250 V en courant monophasé alternatif ou courant continu et 440 V en courant alternatif triphasé. Complète ou modifie les articles correspondants de la CEI 60745-1.

Električna ročna orodja - Varnost -2-18. del: Posebne zahteve za ročno orodje za zategovanje pakirnih trakov (IEC 60745-2-18:2003; spremenjen)

General Information

• Status: Withdrawn
• Publication Date: 09-Jun-2004
• Withdrawal Date: 28-Feb-2007
• ICS: 25.140.20 - Electric tools
• Technical Committee: CLC/TC 116 - Safety of hand-held motor-operated electric tools
• Drafting Committee: IEC/TC 116 - Safety of hand-held motor-operated electric tools
• Parallel Committee: IEC/SC 61F - IEC_SC_61F --> TC 116
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 01-Apr-2011
• Completion Date: 01-Apr-2011
• Directive: 98/37/EC - Machinery
• Ref Project: SIST EN 60745-2-18:2004 - Hand-held motor-operated electric tools - Safety -- Part 2-18: Particular requirements of strapping tools

Relations

• Replaced By: EN 60745-2-18:2009 - Hand-held motor-operated electric tools - Safety - Part 2-18: Particular requirements for strapping tools
• Effective Date: 07-Jun-2022
• Amended By: EN 60745-2-18:2004/A1:2008 - Hand-held motor-operated electric tools - Safety - Part 2-18: Particular requirements for strapping tools
• Effective Date: 29-Jan-2023
• Amended By: EN 60745-2-18:2004/A11:2007 - Hand-held motor-operated electric tools - Safety - Part 2-18: Particular requirements for strapping tools
• Effective Date: 07-Jun-2022
• Revised: EN 60745-2-18:2009 - Hand-held motor-operated electric tools - Safety - Part 2-18: Particular requirements for strapping tools
• Effective Date: 05-Apr-2011

Standards Content (Sample)

SLOVENSKI STANDARD
01-oktober-2004
(OHNWULþQDURþQDRURGMD9DUQRVWGHO3RVHEQH]DKWHYH]DURþQRRURGMH]D
]DWHJRYDQMHSDNLUQLKWUDNRY,(&VSUHPHQMHQ
Hand-held motor-operated electric tools - Safety -- Part 2-18: Particular requirements of
strapping tools
Handgeführte motorbetriebene Elektrowerkzeuge - Sicherheit -- Teil 2-18: Besondere
Anforderungen für Umreifungswerkzeuge
Outils électroportatifs à moteur - Sécurité -- Partie 2-18: Règles particulières pour les
outils de cerclage
Ta slovenski standard je istoveten z: EN 60745-2-18:2004
ICS:
25.140.20 (OHNWULþQDRURGMD Electric tools
55.040 0DWHULDOLLQSULSRPRþNL]D Packaging materials and
SDNLUDQMH accessories
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 60745-2-18
NORME EUROPÉENNE
EUROPÄISCHE NORM June 2004
ICS 25.140.20
English version
Hand-held motor-operated electric tools –
Safety
Part 2-18: Particular requirements of strapping tools
(IEC 60745-2-18:2003, modified)

Outils électroportatifs à moteur –  Handgeführte motorbetriebene
Sécurité Elektrowerkzeuge –
Partie 2-18: Règles particulières Sicherheit
pour les outils de cerclage Teil 2-18: Besondere Anforderungen
(CEI 60745-2-18:2003, modifiée) für Umreifungswerkzeuge
(IEC 60745-2-18:2003, modifiziert)

This European Standard was approved by CENELEC on 2004-03-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden,
Switzerland and United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels

© 2004 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 60745-2-18:2004 E
Foreword
The text of the International Standard IEC 60745-2-18:2003, prepared by SC 61F, Safety of hand-held
motor-operated electric tools, of IEC TC 61, Safety of household and similar electrical appliances,
together with the common modifications prepared by the Technical Committee CENELEC TC 61F,
Safety of hand-held and transportable motor-operated electric tools, was submitted to the Unique
Acceptance Procedure and was approved by CENELEC as EN 60745-2-18 on 2004-03-01.
The following dates were fixed:
– latest date by which the EN has to be implemented (dop) 2005-03-01
at national level by publication of an identical
national standard or by endorsement
– latest date by which the national standards conflicting (dow) 2007-03-01
with the EN have to be withdrawn
Other standards referred to in this European standard are listed in Clause 2. Clause 2 lists the valid
edition of those documents at the time of issue of this EN.
This standard is divided into two parts:
Part 1: General requirements which are common to most hand-held electric motor operated tools
(for the purpose of this standard referred to simply as tools) which could come within the
scope of this standard;
Part 2: Requirements for particular types of tools which either supplement or modify the
requirements given in Part 1 to account for the particular hazards and characteristics of
these specific tools.
This European Standard has been prepared under a mandate given to CEN and CENELEC by the
European Commission and the European Free Trade Association and supports the essential health
and safety requirements of the Machinery Directive.
Compliance with the clauses of Part 1 together with this Part 2 provides one means of conforming with
the essential health and safety requirements of the Directive concerned.
CEN TC/255 is producing standards for non electrically driven strapping tools (EN 792-?).
Warning: Other requirements and other EC Directives can be applicable to the products falling
within the scope of this standard.
This standard follows the overall requirements of EN 292-1 and EN 292-2.
This Part 2-18 is to be used in conjunction with EN 60745-1:2003. When this standard states
"addition", "modification" or "replacement", the relevant text of Part 1 is to be adapted accordingly.
Subclauses, tables and figures which are additional to those in Part 1 are numbered starting from 101.
Subclauses, tables and figures which are additional to those in IEC 60745-2-18 are prefixed “Z”.
NOTE In this standard the following print types are used:
– Requirements proper;
Test specifications;
–
– Explanatory matter.
- 3 - EN 60745-2-18:2004
Endorsement notice
The text of the International Standard IEC 60745-2-18:2003 was approved by CENELEC as a
European Standard with agreed common modifications as given below.
COMMON MODIFICATIONS
1 Environmental requirements
This clause of Part 1 is applicable except as follows:
6.1.2.4 Modification:
Strapping tools are suspended with the motor axis horizontal.
6.1.2.5 Modification:
Strapping tools are tested at no-load.
6.2.2.4 Modification:
Strapping tools are tested under the conditions specified in 6.1.2.5.
21 Construction
This clause of Part 1 is applicable except as follows:
21.Z1 This clause of Part 1 is not applicable.

NORME CEI
INTERNATIONALE IEC
60745-2-18
INTERNATIONAL
Première édition
STANDARD
First edition
2003-01
Outils électroportatifs à moteur –
Sécurité –
Partie 2-18:
Règles particulières pour les outils de cerclage
Hand-held motor-operated electric tools –
Safety –
Part 2-18:
Particular requirements for strapping tools
 IEC 2003 Droits de reproduction réservés  Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including
électronique ou mécanique, y compris la photocopie et les photocopying and microfilm, without permission in writing from
microfilms, sans l'accord écrit de l'éditeur. the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: [phone] Telefax: [phone] E-mail: [e-mail]  Web: www.iec.ch
CODE PRIX
J
Commission Electrotechnique Internationale PRICE CODE
International Electrotechnical Commission
Международная Электротехническая Комиссия
Pour prix, voir catalogue en vigueur
For price, see current catalogue

60745-2-18  IEC:2003 – 3 –
CONTENTS
FOREWORD . 5
1 Scope . 9
2 Normative references. 9
3 Definitions . 9
4 General requirements . 9
5 General conditions for the tests . 9
6 Void. 9
7 Classification . 9
8 Marking and instructions . 9
9 Protection against access to live parts . 9
10 Starting.11
11 Input and current .11
12 Heating.11
13 Leakage current.11
14 Moisture resistance.11
15 Electric strength.11
16 Overload protection of transformers and associated circuits.11
17 Endurance .11
18 Abnormal operation.13
19 Mechanical hazards .
...