EN 60851-3:2009/A2:2019

Winding wires - Test methods - Part 3: Mechanical properties

This part of IEC 60851 specifies the following methods of test for winding wires:
– Test 6: Elongation;
– Test 7: Springiness;
– Test 8: Flexibility and adherence;
– Test 11: Resistance to abrasion;
– Test 18: Heat bonding.
For definitions, general notes on methods of test and the complete series of methods of test for winding wires, see IEC 60851-1.

Wickeldrähte - Prüfverfahren - Teil 3: Mechanische Eigenschaften

Fils de bobinage - Méthodes d'essai - Partie 3: Propriétés mécaniques

Navijalne žice - Preskusne metode - 3. del: Mehanske lastnosti - Dopolnilo A2 (IEC 60851-3:2009/A2:2019)

General Information

• Status: Published
• Publication Date: 17-Oct-2019
• Withdrawal Date: 26-Sep-2022
• ICS: 29.060.10 - Wires
• Technical Committee: CLC/TC 55 - Winding wires
• Drafting Committee: IEC/TC 55 - IEC_TC_55
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 18-Oct-2019
• Completion Date: 18-Oct-2019
• Ref Project: SIST EN 60851-3:2009/A2:2019 - Winding wires - Test methods - Part 3: Mechanical properties (IEC 60851-3:2009/A2:2019)

Relations

• Replaced By: EN IEC 60851-3:2023 - Winding wires - Test methods - Part 3: Mechanical properties
• Effective Date: 10-May-2022
• Amends: EN 60851-3:2009 - Winding wires - Test methods - Part 3: Mechanical properties
• Effective Date: 23-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
01-december-2019
Navijalne žice - Preskusne metode - 3. del: Mehanske lastnosti - Dopolnilo A2 (IEC
60851-3:2009/A2:2019)
Winding wires - Test methods - Part 3: Mechanical properties (IEC 60851-
3:2009/A2:2019)
Wickeldrähte - Prüfverfahren - Teil 3: Mechanische Eigenschaften (IEC 60851-
3:2009/A2:2019)
Fils de bobinage - Méthodes d'essai - Partie 3: Propriétés mécaniques (IEC 60851-
3:2009/A2:2019)
Ta slovenski standard je istoveten z: EN 60851-3:2009/A2:2019
ICS:
29.060.10 Žice Wires
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 60851-3:2009/A2

NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2019
ICS 29.060.10
English Version
Winding wires - Test methods - Part 3: Mechanical properties
(IEC 60851-3:2009/A2:2019)
Fils de bobinage - Méthodes d'essai - Partie 3: Propriétés Wickeldrähte - Prüfverfahren - Teil 3: Mechanische
mécaniques Eigenschaften
(IEC 60851-3:2009/A2:2019) (IEC 60851-3:2009/A2:2019)
This amendment A2 modifies the European Standard EN 60851-3:2009; it was approved by CENELEC on 2019-09-27. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 60851-3:2009/A2:2019 E

European foreword
The text of document 55/1781/FDIS, future IEC 60851-3/A2, prepared by IEC/TC 55 "Winding wires"
was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 60851-
3:2009/A2:2019.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2020-06-27
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2022-09-27
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

Endorsement notice
The text of the International Standard IEC 60851-3:2009/A2:2019 was approved by CENELEC as a
European Standard without any modification.

IEC 60851-3 ®
Edition 3.0 2019-08
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
A MENDMENT 2
AM ENDEMENT 2
Winding wires – Test methods –

Part 3: Mechanical properties
Fils de bobinage – Méthodes d'essai –

Partie 3: Propriétés mécaniques

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.060.10 ISBN 978-2-8322-7208-4

– 2 – IEC 60851-3:2009/AMD2:2019
© IEC 2019
FOREWORD
This amendment has been prepared by IEC tech
...