EN 61076-4-111:2002

Connectors for electronic equipment - Part 4-111: Printed board connectors with assessed quality - Detail specification for two-part power connector modules, for printed boards and backplanes having early mating features, and having a basic grid of 2,5 mm in accordance with IEC 60917-1

This publication also bears the number QC 480301XX0012 which is the specification number in the IEC Quality Assessment System for Electronic Components (IECQ).

Steckverbinder für elektronische Einrichtungen - Teil 4-111: Steckverbinder für gedruckte Schaltungen mit bewerteter Qualität - Bauartspezifikation für indirekte Hochstromsteckverbindermodule mit Voreilung für gedruckte Schaltungen und Rückplatten im Raster 2,5 mm nach IEC 60917

Connecteurs pour équipements électroniques - Partie 4-111: Connecteurs pour cartes imprimées sous assurance de la qualité - Spécification particulière pour modules de connecteur de puissance à deux parties, pour cartes imprimées et panneaux arrière ayant les premières caractéristiques de couplage et une grille au pas de 2,5 mm conformément à la CEI 60917-1

Connectors for electronic equipment - Part 4-111: Printed board connectors with assessed quality - Detail specification for two-part power connector modules, for printed boards and backplanes having early mating features, and having a basic grid of 2,5 m mm in accordance with IEC 60917-1 (IEC 61076-4-111:2002)

General Information

• Status: Withdrawn
• Publication Date: 12-Jun-2002
• Withdrawal Date: 28-Feb-2005
• ICS: 31.220.10 - Plug-and-socket devices. Connectors
• Technical Committee: CLC/SR 48B - Connectors
• Drafting Committee: IEC/SC 48B - IEC_SC_48B
• Parallel Committee: IEC/SC 48B - IEC_SC_48B
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 02-Aug-2023
• Completion Date: 14-Apr-2025
• Ref Project: SIST EN 61076-4-111:2003 - Connectors for electronic equipment -- Part 4-111: Printed board connectors with assessed quality - Detail specification for two-part power connector modules, for printed boards and backplanes having early mating features, and having a basic grid of 2,5 mm in accordance with IEC 60917-1

Standards Content (Sample)

STANDARDConnectors for electronic equipment - Part 4-111: Printed board connectors with assessed quality - Detail specification for two-part power connector modules, for printed boards and backplanes having early mating features, and having a basic grid of 2,5 m mm in accordance with IEC 60917-1 (IEC
61076-4-111:2002)©
Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljenoReferenčna številkaSIST EN 61076-4-111:2003(en)ICS31.220.10

EUROPEAN STANDARDEN 61076-4-111NORME EUROPÉENNEEUROPÄISCHE NORMJune 2002CENELECEuropean Committee for Electrotechnical StandardizationComité Européen de Normalisation ElectrotechniqueEuropäisches Komitee für Elektrotechnische NormungCentral Secretariat: rue de Stassart 35, B - 1050 Brussels© 2002 CENELEC -All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.Ref. No. EN 61076-4-111:2002 EICS 31.220.10English versionConnectors for electronic equipmentPart 4-111: Printed board connectors with assessed quality -Detail specification for two-part power connector modules,for printed boards and backplanes having early mating features,and having a basic grid of 2,5 mm in accordance with IEC 60917-1(IEC 61076-4-111:2002)Connecteurs pour équipementsélectroniquesPartie 4-111: Connecteurs pour cartesimprimées sous assurance de la qualité -Spécification particulière pour modulesde connecteur de puissanceà deux parties, pour cartes impriméeset panneaux arrière ayant les premièrescaractéristiques de couplageet une grille au pas de 2,5 mmconformément à la CEI 60917-1(CEI 61076-4-111:2002)Steckverbinder für elektronischeEinrichtungenTeil 4-111: Steckverbinder für gedruckteSchaltungen mit bewerteter Qualität -Bauartspezifikation für indirekteHochstromsteckverbindermodulemit Voreilung für gedruckte Schaltungenund Rückplatten im Raster 2,5 mmnach IEC 60917(IEC 61076-4-111:2002)This European Standard was approved by CENELEC on 2002-03-01. CENELEC members are bound tocomply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration.Up-to-date lists and bibliographical references concerning such national standards may be obtained onapplication to the Central Secretariat or to any CENELEC member.This European Standard exists in three official versions (English, French, German). A version in any otherlanguage made by translation under the responsibility of a CENELEC member into its own language andnotified to the Central Secretariat has the same status as the official versions.CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta,Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.

- 3 -EN 61076-4-111:2002Annex ZA(normative)Normative references to international publicationswith their corresponding European publicationsThis European Standard incorporates by dated or undated reference, provisions from otherpublications. These normative references are cited at the appropriate places in the text and thepublications are listed hereafter. For dated references, subsequent amendments to or revisions of anyof these publications apply to this European Standard only when incorporated in it by amendment orrevision. For undated references the latest edition of the publication referred to applies (includingamendments).NOTEWhen an international publication has been modified by common modifications, indicated by (mod), the relevantEN/HD applies.PublicationYearTitleEN/HDYearIEC 60068-1- 1)Environmental testingPart 1: General and guidanceEN 60068-11994 2)IEC 60326-31991Printed boardsPart 3: Design and use of printedboards--IEC 60352-51995Solderless connectionsPart 5: Solderless press-in connections- General requirements, test methodsand practical guidanceEN 60352-5 3)1995IEC 604101973Sampling plans and procedures forinspection by attributes--IEC 60512SeriesConnectors for electronic equipment
-Tests and measurementsEN 60512SeriesIEC 60512-1-1002001Connectors for electronic equipment -Tests and measurementsPart 1-100: General - ApplicablepublicationsEN 60512-1-1002001IEC 60664-1(mod)1992Insulation coordination for equipmentwithin low-voltage systemsPart 1: Principles, requirements andtestsHD 625.1 S1+ corr. October19961996IEC 60917-11998Modular order for the development ofmechanical structures for electronicequipment practicesPart 1: Generic standardEN 60917-11998
1) Undated reference.2) Valid edition at date of issue.3) EN 60352-5:1995 is superseded by EN 60352-5:2001, which is based on IEC 60352-5:2001.

INTERNATIONALSTANDARDIEC61076-4-111QC 480301XX0012First edition2002-02Connectors for electronic equipment –Part 4-111:Printed board connectors with assessed quality –Detail specification for two-part power connectormodules, for printed boards and backplaneshaving early mating features, and having a basicgrid of 2,5 mm in accordance with IEC 60917-1 IEC 2002

Copyright - all rights reservedNo part of this publication may be reproduced or utilized in any form or by any means, electronic ormechanical, including photocopying and microfilm, without permission in writing from the publisher.International Electrotechnical Commission,
3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, SwitzerlandTelephone: [phone]
Telefax: [phone]
E-mail: [e-mail]
Web: www.iec.chVFor price, see current cataloguePRICE CODECommission Electrotechnique InternationaleInternational Electrotechnical Commission

– 2 –61076-4-111  IEC:2002(E)2CONTENTSFOREWORD.1General data.71.1Recommended method of mounting.71.1.1Number of contacts.71.2Ratings and characteristics.71.3Normative references.81.4Marking.81.5IEC type designation.91.6
Ordering information.92Technical information.102.1Definitions.102.2Survey of styles and variants.102.3Information on application.102.3.1Complete connectors (pairs).102.3.2Fixed board connectors.102.3.3Free board connectors.102.4Contact arrangements.103Drawings and dimensions.113.1General.113.2 Isometric view and common features.113.2.1Common features.123.2.2Reference system.123.2.3Height dimensions.123.2.4Width dimensions.133.2.5Depth dimensions.133.3Mating information.143.3.1Electrical engagement length.143.3.2Perpendicular to engaging direction.143.3.3Inclination.153.4Fixed board connectors.163.4.1Dimensions.163.4.2Terminations.163.4.3Dimensions of contacts.173.5Free board connectors.173.5.1Dimension.173.5.2Terminations.183.5.3Dimensions of contacts.183.6Accessories.183.7Mounting information for fixed board connectors.183.7.1Hole pattern on backplane.183.8Mounting information for free board connectors.193.8.1Hole pattern on printed boards.193.9Gauges.203.9.1Sizing gauge and retention force gauge.20

61076-4-111  IEC:2002(E)– 3 –34Characteristics.204.1Climatic category.204.2Electrical.214.2.1Creepage and clearance distances.214.2.2Voltage proof.214.2.3Current-carrying capacity.214.2.4Contact resistance.214.2.5Insulation resistance.224.3Mechanical.224.3.1Mechanical operation.224.3.2Engaging and separating forces.224.3.3Contact retention in insert.224.3.4Polarizing method.224.3.5Gauge retention force.225Test schedule.235.1General.235.1.1Arrangement for contact resistance measurement.235.1.2Arrangement for dynamic stress tests.
...