EN IEC 62343-5-2:2018

Dynamic modules - Part 5-2: Test methods - 1xN fixed-grid WSS - Dynamic crosstalk measurement

IEC 62343-5-2:2018 describes the measurement methods of dynamic crosstalk during port switching for 1 x N fixed-grid wavelength selective switches (WSSs). The objective of this document is to establish a standard test method for different-channel dynamic crosstalk and same-channel dynamic crosstalk that occur when a particular optical channel signal is switched to the specific branching port against a common port in ITU‑T 50 GHz and 100 GHz fixed grid 1 x N (N ≥ 3) WSSs.

Dynamische Module - Teil 5-2: Prüfverfahren - 1×N-Festraster-WSS - Messung des dynamischen Übersprechens

Modules dynamiques - Partie 5-2: Méthodes d'essai - Commutateurs sélectifs en longueur d'onde à grille fixe 1 x N - Mesure de diaphonie dynamique

IEC 62343-5-2: 2018 décrit les méthodes de mesure de diaphonie dynamique pendant la commutation des ports pour les commutateurs sélectifs en longueur d'onde à grille fixe 1 x N. Le présent document a pour but d'établir une méthode d'essai normalisée sur la diaphonie dynamique sur différents canaux et la diaphonie dynamique sur un même canal qui se produisent lorsque le signal d'un canal optique particulier est commuté sur le port de couplage spécifique par rapport à un port commun dans des commutateurs sélectifs en longueur d'onde à grille fixe 1 x N (N ≥ 3) de 50 GHz et 100 GHz selon l'UIT-T. Mots clés: diaphonie dynamique

Dinamični moduli - 5-2. del: Preskusne metode - 1xN WSS s fiksno mrežo - Merjenje dinamičnega presluha (IEC 62343-5-2:2018)

Ta del IEC 62343 opisuje metode merjenja dinamičnega preklopnega odmeva med preklapljanjem vrat za 1 x N stikal za izbiro valovne dolžine (WSSs) v fiksnem omrežju.
Cilj tega dokumenta je določiti standardno metodo preskušanja za dinamični preklopni odmev različnih kanalov in dinamični preklopni odmev istega kanala, do katerih pride, ko posamezni signal optičnega kanala preklopi na določena razvejilna vrata ob skupnih vratih v fiksnem omrežju ITU-T 50 GHz in 100 GHz 1 x N (N ≥ 3) WSSs.

General Information

• Status: Published
• Publication Date: 22-Mar-2018
• Withdrawal Date: 18-Feb-2021
• ICS: 33.180.01 - Fibre optic systems in general
• ICS: 33.180.99 - Other fibre optic equipment
• Technical Committee: CLC/SR 86C - Fibre optic systems and active devices
• Drafting Committee: IEC/SC 86C - IEC_SC_86C
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 23-Mar-2018
• Completion Date: 23-Mar-2018
• Ref Project: SIST EN IEC 62343-5-2:2018 - Dynamic modules - Part 5-2: Test methods - 1xN fixed-grid WSS - Dynamic crosstalk measurement (IEC 62343-5-2:2018)

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 62343-5-2:2018
01-maj-2018
'LQDPLþQLPRGXOLGHO3UHVNXVQHPHWRGH[1:66VILNVQRPUHåR
0HUMHQMHGLQDPLþQHJDSUHVOXKD,(&
Dynamic modules - Part 5-2: Test methods - 1xN fixed-grid WSS - Dynamic crosstalk
measurement (IEC 62343-5-2:2018)
Ta slovenski standard je istoveten z: EN IEC 62343-5-2:2018
ICS:
33.180.01 6LVWHPL]RSWLþQLPLYODNQLQD Fibre optic systems in
VSORãQR general
SIST EN IEC 62343-5-2:2018 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN IEC 62343-5-2:2018

---------------------- Page: 2 ----------------------

SIST EN IEC 62343-5-2:2018


EUROPEAN STANDARD EN IEC 62343-5-2

NORME EUROPÉENNE

EUROPÄISCHE NORM
March 2018
ICS 33.180.01, 33.180.99

English Version
Dynamic modules - Part 5-2: Test methods - 1xN fixed-grid WSS
- Dynamic crosstalk measurement
(IEC 62343-5-2:2018)
Modules dynamiques - Partie 5-2: Méthodes d'essai - Dynamische Module - Teil 5-2: Prüfverfahren - 1×N-
Commutateurs sélectifs en longueur d'onde à grille fixe 1 x Festraster-WSS - Messung des dynamischen
N - Mesure de diaphonie dynamique Übersprechens
(IEC 62343-5-2:2018) (IEC 62343-5-2:2018)
This European Standard was approved by CENELEC on 2018-02-19. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.



European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 62343-5-2:2018 E

---------------------- Page: 3 ----------------------

SIST EN IEC 62343-5-2:2018
EN IEC 62343-5-2:2018 (E)


European foreword
The text of document 86C/1449/CDV, future edition 1 of IEC 62343-5-2, prepared by IEC/SC 86C
"Fibre optic systems and active devices" of IEC/TC 86 "Fibre optics" was submitted to the IEC-
CENELEC parallel vote and approved by CENELEC as EN IEC 62343-5-2:2018.

The following dates are fixed:
• latest date by which the document has to be (dop) 2018-11-19
implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2021-02-19
• latest date by which the national
standards conflicting with the
document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

Endorsement notice
The text of the International Standard IEC 62343-5-2:2018 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:

IEC 61300-3-50 NOTE Harmonized as EN 61300-3-50.
IEC 62343-3-3:2014 NOTE Harmonized as EN 62343-3-3:2014 (not modified).

2

---------------------- Page: 4 ----------------------

SIST EN IEC 62343-5-2:2018
EN IEC 62343-5-2:2018 (E)

Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.

NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.

NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this anne
...