EN 62560:2012
(Main)Self-ballasted LED-lamps for general lighting services by voltage > 50 V - Safety specifications
Self-ballasted LED-lamps for general lighting services by voltage > 50 V - Safety specifications
IEC 62560:2011 specifies the safety and interchangeability requirements, together with the test methods and conditions required to show compliance of LED-lamps with integrated means for stable operation (self-ballasted LED-lamps), intended for domestic and similar general lighting purposes, having: - a rated wattage up to 60 W; - a rated voltage of > 50 V up to 250 V; - caps according to Table 1. The contents of the corrigendum of January 2012 have been included in this copy.
LED-Lampen mit eingebautem Vorschaltgerät für Allgemeinbeleuchtung für Spannungen > 50 V - Sicherheitsanforderungen
Lampes à DEL autoballastées pour l'éclairage général fonctionnant à des tensions > 50 V - Spécifications de sécurité
La CEI 62560:2011 spécifie les exigences de sécurité et d'interchangeabilité, ainsi que les méthodes et les conditions d'essai prescrites pour démontrer la conformité des lampes à DEL à dispositif intégré pour assurer un fonctionnement stable (lampes à DEL autoballastées), destinées à l'éclairage général domestique et analogue, ayant: - une puissance assignée inférieure ou égale à 60 W; - une tension assignée > 50 V inférieure ou égale à 250 V; - des culots conformes au Tableau 1. Le contenu du corrigendum de janvier 2012 a été pris en considération dans cet exemplaire.
LED-sijalke za splošno razsvetljavo z vgrajeno predstikalno napravo pri napetosti nad 50 V - Varnostne specifikacije
Ta mednarodni standard določa zahteve za varnost in zamenljivost vključno s preskusnimi metodami in pogoji, ki so potrebni za preverjanje skladnosti LED-sijalk z vključenimi sredstvi za stabilno delovanje (LED-sijalke za mešano svetlobo), ki so namenjene za domačo in podobno splošno razsvetljavo ter imajo: – nazivno moč do 60 W; - nazivno napetost med 50 V in 250 V; - vnožke v skladu s tabelo 1. Zahteve iz tega standarda se nanašajo samo na tipsko preskušanje. Priporočila za preskušanje celotnega proizvoda ali serije so enaka tistim v dodatku C standarda IEC 62031.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 62560:2013
01-marec-2013
LED-sijalke za splošno razsvetljavo z vgrajeno predstikalno napravo pri napetosti
nad 50 V - Varnostne specifikacije
Self-ballasted LED-lamps for general lighting services by voltage > 50 V - Safety
specifications
LED-Lampen mit eingebautem Vorschaltgerät für Allgemeinbeleuchtung für Spannungen
> 50 V - Sicherheitsanforderungen
Lampes à DEL autoballastées pour l'éclairage général fonctionnant à des tensions > 50
V - Spécifications de sécurité
Ta slovenski standard je istoveten z: EN 62560:2012
ICS:
29.140.30 )OXRUHVFHQþQHVLMDONH6LMDONH Fluorescent lamps.
Discharge lamps
SIST EN 62560:2013 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 62560:2013
---------------------- Page: 2 ----------------------
SIST EN 62560:2013
EUROPEAN STANDARD
EN 62560
NORME EUROPÉENNE
December 2012
EUROPÄISCHE NORM
ICS 29.140.30
English version
Self-ballasted LED-lamps for general lighting services by voltage > 50 V -
Safety specifications
(IEC 62560:2011, modified + corrigendum Jan. 2012)
Lampes à DEL autoballastées pour LED-Lampen mit eingebautem
l'éclairage général fonctionnant à des Vorschaltgerät für Allgemeinbeleuchtung
tensions > 50 V - für Spannungen > 50 V -
Spécifications de sécurité Sicherheitsanforderungen
(CEI 62560:2011, modifiée + corrigendum (IEC 62560:2011, modifiziert +
Jan. 2012) corrigendum Jan. 2012)
This European Standard was approved by CENELEC on 2012-10-15. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62560:2012 E
---------------------- Page: 3 ----------------------
SIST EN 62560:2013
EN 62560:2012 - 2 -
Foreword
This document (EN 62560:2012) consists of the text of IEC 62560:2011 + corrigendum Jan. 2012,
prepared by SC 34A, "Lamps, of IEC/TC 34, Lamps and related equipment", together with the
common modifications prepared by CLC/SR 34A "Lamps ".
The following dates are fixed:
• latest date by which this document has to be (dop) 2013-10-15
implemented at national level by publication of
an identical national standard or by
endorsement
(dow) 2015-10-15
• latest date by which the national standards
conflicting with this document have to
be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
This European Standard covers the Principle Elements of the Safety Objectives for Electrical
Equipment Designed for Use within Certain Voltage Limits (LVD - 2006/95/EC).
__________
---------------------- Page: 4 ----------------------
SIST EN 62560:2013
- 3 - EN 62560:2012
Endorsement notice
The text of the International Standard IEC 62560:2011 + corrigendum Jan. 2012 was approved by
CENELEC as a European Standard with agreed common modifications.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 60400 NOTE Harmonized as EN 60400.
IEC 60968 NOTE Harmonized as EN 60968.
COMMON MODIFICATIONS
Lamps with the following caps are excluded from EN 62560:2012 as they do not comply with
European safety requirements:
– E11;
– E12;
– E17;
– E26.
Delete from the contents page the line on Annex B.
Delete from Clause 5.2 the item a).
Include in Clause 14 the Corrigendum January 2012.
Delete Annex B.
__________
---------------------- Page: 5 ----------------------
SIST EN 62560:2013
EN 62560:2012 - 4 -
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
IEC 60061-1 - Lamp caps and holders together with EN 60061-1 -
gauges for the control of interchangeability
and safety -
Part 1: Lamp caps
IEC 60061-3 - Lamp caps and holders together with EN 60061-3 -
gauges for the control of interchangeability
and safety -
Part 3: Gauges
IEC 60360 - Standard method of measurement of lamp EN 60360 -
cap temperature rise
IEC 60432-1 - Incandescent lamps - Safety specifications - EN 60432-1 -
Part 1: Tungsten filament lamps for domestic
and similar general lighting purposes
IEC 60529 1989 Degrees of protection provided EN 60529 1991
by enclosures (IP Code) + corr. May 1993
IEC 60598-1 (mod) 2008 Luminaires - EN 60598-1 2008
+ corr. October 2011 Part 1: General requirements and tests
+ corr. December 2011
- - + A11 2009
IEC 60695-2-10 2000 Fire hazard testing - EN 60695-2-10 2001
Part 2-10: Glowing/hot-wire based test
methods - Glow-wire apparatus and common
test procedure
IEC 60695-2-11 2000 Fire hazard testing - EN 60695-2-11 2001
+ corr. January 2001 Part 2-11: Glowing/hot-wire based test
methods - Glow-wire flammability test
method for end-products
1)
IEC 60695-2-12 2000 Fire hazard testing - EN 60695-2-12 2001
Part 2-12: Glowing/hot-wire based test
methods - Glow-wire flammability test
method for materials
2)
IEC 60695-2-13 2000 Fire hazard testing - EN 60695-2-13 2001
Part 2-13: Glowing/hot-wire based test
methods - Glow-wire ignitability test method
for materials
3)
IEC 61199 1999 Single-capped fluorescent lamps - Safety EN 61199 1999
specifications
1)
EN 60695-2-12 is superseded by EN 60695-2-12:2010, which is based on IEC 60695-2-12:2010.
2)
EN 60695-2-13 is superseded by EN 60695-2-13:2010, which is based on IEC 60695-2-13:2010 + corrigendum Feb. 2012.
3)
EN 61199 is superseded by EN 61199:2011, which is based on IEC 61199:2011.
---------------------- Page: 6 ----------------------
SIST EN 62560:2013
- 5 - EN 62560:2012
Publication Year Title EN/HD Year
IEC 61347-1 (mod) 2007 Lamp controlgear - EN 61347-1 2008
Part 1: General and safety requirements
IEC 62031 2008 LED modules for general lighting - Safety EN 62031 2008
specifications
IEC/TR 62471-2 - Photobiological safety of lamps and lamp - -
systems -
Part 2: Guidance on manufacturing
requirements relating to non-laser optical
radiation safety
IEC/TS 62504 - General lighting - LEDs and LED modules - - -
Terms and definitions
ISO 4046-4 2002 Paper, board, pulps and related terms - - -
Vocabulary -
Part 4: Paper and board grades and
converted products
---------------------- Page: 7 ----------------------
SIST EN 62560:2013
---------------------- Page: 8 ----------------------
SIST EN 62560:2013
IEC 62560
®
Edition 1.0 2011-02
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Self-ballasted LED-lamps for general lighting services by voltage > 50 V – Safety
specifications
Lampes à DEL autoballastées pour l’éclairage général fonctionnant à des
tensions > 50 V – Spécifications de sécurité
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX T
ICS 29.140.30 ISBN 978-2-88912-355-1
® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale
---------------------- Page: 9 ----------------------
SIST EN 62560:2013
– 2 – 62560 IEC:2011
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 7
2 Normative references . 7
3 Terms and definitions . 8
4 General requirements and general test requirements . 9
5 Marking . 9
6 Interchangeability . 10
6.1 Cap interchangeability . 10
6.2 Bending moment, axial pull and mass . 12
7 Protection against accidental contact with live parts . 12
8 Insulation resistance and electric strength after humidity treatment . 14
8.1 General . 14
8.2 Insulation resistance . 14
8.3 Electric strength . 14
9 Mechanical strength . 15
9.1 Torsion resistance of unused lamps . 15
9.2 Torsion resistance of lamps after a defined time of usage . 18
9.3 Repetition of Clause 8 . 18
10 Cap temperature rise . 18
11 Resistance to heat . 18
12 Resistance to flame and ignition . 19
13 Fault conditions . 20
13.1 General . 20
13.2 Extreme electrical conditions (dimmable lamps) . 20
13.3 Extreme electrical conditions (non-dimmable lamps) . 20
13.4 Short-circuit across capacitors . 20
13.5 Fault conditions across electronic components . 20
13.6 Compliance . 20
14 Creepage distances and clearances . 21
Annex A (informative) Overview of systems composed of LED modules and control
gear . 22
Annex B (normative) Lamps with operating position limitations (see 5.2) . 23
Bibliography . 24
Figure 1 – Dimming not allowed . 10
Figure 2 – Standard test finger (according to IEC 60529) . 13
Figure 3 – Holder for torque test on lamps with screw caps. 16
Figure 4 – Holder for torque test on lamps with bayonet caps . 17
Figure 5 – Ball-pressure test apparatus . 18
Figure B.1 – Operating and non-operating positions . 23
Table 1 – Interchangeability gauges and lamp cap dimensions . 11
---------------------- Page: 10 ----------------------
SIST EN 62560:2013
62560 IEC:2011 – 3 –
Table 2 – Bending moments and masses . 12
Table 3 – Torque test values for unused lamps . 17
---------------------- Page: 11 ----------------------
SIST EN 62560:2013
– 4 – 62560 IEC:2011
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
SELF-BALLASTED LED-LAMPS FOR GENERAL
LIGHTING SERVICES BY VOLTAGE > 50 V –
SAFETY SPECIFICATIONS
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 62560 has been prepared by subcommittee 34A: Lamps, of IEC
technical committee 34: Lamps and related equipment.
The text of this standard is based on the following documents:
FDIS Report on voting
34A/1425/FDIS 34A/1447/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
---------------------- Page: 12 ----------------------
SIST EN 62560:2013
62560 IEC:2011 – 5 –
In this standard, the following print types are used:
– requirements proper: in roman type.
– test specifications: in italic type.
The committee has decided that the contents of this publication will remain unchanged until
the stability date indicated on the IEC web site under "http://webstore.iec.ch" in the data
related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
The contents of the corrigendum of January 2012 have been included in this copy.
---------------------- Page: 13 ----------------------
SIST EN 62560:2013
– 6 – 62560 IEC:2011
INTRODUCTION
There will be and are already LED products in the market which substitute existing lamps,
either as retrofit mains voltage incandescent or self-ballasted fluorescent lamps or as
replacement for tungsten halogen lamps below 50 V.
The present document takes up the supply voltage range from > 50 V up to 250 V. A proposal
for a safety standard for LED lamps with voltages ≤ 50 V may follow in due time.
Future work will also consequently comprise performance standards for all kind of LED lamps,
including minimum photometric requirements for type testing.
Due to the urgent need of establishing this standard, it will be a stand-alone standard for the
time being, not excluding a future relocation as a part of IEC 60968, self-ballasted lamps.
---------------------- Page: 14 ----------------------
SIST EN 62560:2013
62560 IEC:2011 – 7 –
SELF-BALLASTED LED-LAMPS FOR GENERAL
LIGHTING SERVICES BY VOLTAGE > 50 V –
SAFETY SPECIFICATIONS
1 Scope
This International Standard specifies the safety and interchangeability requirements, together
with the test methods and conditions required to show compliance of LED-lamps with
integrated means for stable operation (self-ballasted LED-lamps), intended for domestic and
similar general lighting purposes, having:
– a rated wattage up to 60 W;
– a rated voltage of > 50 V up to 250 V;
– caps according to Table 1.
The requirements of this standard relate only to type testing.
Recommendations for whole product testing or batch testing are identical to those given in
Annex C of IEC 62031.
NOTE Where in this standard the term “lamp(s)” is used, it is understood to stand for “self-ballasted LED-
lamp(s)”, except where it is obviously assigned to other types of lamps.
2 Normative references
The following reference documents are indispensable for the application of this document. For
dated references, only the edition cited applies. For undated references, the latest edition of
the reference document (including any amendments) applies.
IEC 60061-1, Lamp caps and holders together with gauges for the control of
interchangeability and safety – Part 1 : Lamp caps
IEC 60061-3, Lamp caps and holders together with gauges for the control of
interchangeability and safety – Part 3 : Gauges
IEC 60360, Standard method of measurement of lamp cap temperature rise
IEC 60432-1, Incandescent lamps – Safety specifications – Part 1: Tungsten filament lamps
for domestic and similar general lighting purposes
IEC 60529:1989, Degrees of protection provided by enclosures (IP Code)
IEC 60598-1:2008, Luminaires – Part 1: General requirements and tests
IEC 60695-2-10:2000, Fire hazard testing – Part 2-10: Glowing/hot-wire based test methods;
Glow-wire apparatus and common test procedure
IEC 60695-2-11:2000, Fire hazard testing – Part 2-11: Glowing/hot-wire based test methods –
Glow-wire flammability test method for end products
IEC 60695-2-12:2000, Fire hazard testing – Part 2-12: Glowing/hot-wire based test methods;
Glow-wire flammability test method for materials
---------------------- Page: 15 ----------------------
SIST EN 62560:2013
– 8 – 62560 IEC:2011
IEC 60695-2-13:2000, Fire hazard testing – Part 2-13: Glowing/hot-wire based test methods;
Glow-wire ignitability test method for materials
IEC 61199:1999, Single-capped fluorescent lamps – Safety specifications
IEC 61347-1:2007, Lamp controlgear – Part 1: General and safety requirements
IEC 62031:2008, LED modules for general lighting – Safety requirements
IEC/TR 62471-2, Photobiological safety of lamps and lamp systems – Part 2: Guidance on
manufacturing requirements relating to non-laser optical radiation safety
1
IEC/TS 62504, Terms and definitions of LEDs and LED modules in general lighting
ISO 4046-4:2002, Paper, board, pulp and related terms – Vocabulary – Part 4: Paper and
board grades and converted products
3 Terms and definitions
For the purposes of this document, the terms and definitions of IEC/TS 62504 (in
preparation), IEC 62031 and the following apply.
3.1
self-ballasted LED-lamp
unit which cannot be dismantled without being permanently damaged, provided with a lamp
cap and incorporating a LED light source and any additional elements necessary for stable
operation of the light source
NOTE Lamp caps are given in IEC 60061-1.
3.2
rated voltage
voltage or voltage range marked on the lamp
3.3
rated wattage
wattage marked on the lamp
3.4
rated frequency
frequency marked on the lamp
3.5
cap temperature rise
Δt
s
surface temperature rise (above ambient) of a standard test lampholder fitted to the lamp,
when measured in accordance with the standard method, in case of an Edison screw cap or a
bayonet cap
NOTE The standard method for Edison screw cap or bayonet cap is that given in IEC 60360.
3.6
live part
conductive part which may cause an electric shock in normal use
___________
1
To be published.
---------------------- Page: 16 ----------------------
SIST EN 62560:2013
62560 IEC:2011 – 9 –
3.7
type
lamps that have an identical electrical rating and a similar cap
3.8
type test
test or series of tests made on a type test sample for the purpose of checking compliance of
the design of a given product with the requirements of the relevant standard
3.9
type test sample
sample consisting of one or more similar units submitted by the manufacturer or responsible
vendor for the purpose of the type test
4 General requirements and general test requirements
4.1 The lamps shall be so designed and constructed that in normal use they function reliably
and cause no danger to the user or surroundings.
In general, compliance is checked by carrying out all the tests specified.
4.2 Self-ballasted LED-lamps are non-repairable, factory-sealed units. They shall normally
not be opened for any tests. In the case of doubt based on the inspection of the lamp and the
examination of the circuit diagram, and in agreement with the manufacturer or responsible
vendor, either the output terminals shall be short-circuited or, in agreement with the
manufacturer, lamps specially prepared so that a fault condition can be simulated shall be
submitted for testing (see Clause 13).
4.3 In general, all tests are carried out on each type of lamp or, where a range of similar
lamps is involved, for each wattage in the range or on a representative selection from the
range, as agreed with the manufacturer.
4.4 When the lamp fails safely during one of the tests, it is replaced, provided that no fire,
smoke or flammable gas is produced. Further requirements on failing safe are given in Clause
12.
5 Marking
5.1 Lamps shall be clearly and durably marked with the following mandatory markings:
a) mark of origin (this may take the form of a trademark, the manufacturer’s name or the
name of the responsible vendor);
b) rated voltage or voltage range (marked “V” or “volts”);
c) rated wattage (marked “W” or “watts”);
d) rated frequency (marked in “Hz”).
5.2 In addition, the following information shall be given by the lamp manufacturer on the
lamp or immediate lamp wrapping or container or in installation instructions.
a) Burning position, if restricted, shall be marked with the appropriate symbol. Symbol
examples are shown in Annex B.
b) rated current (marked “A” or “ampere”);
c) “For lamps with a weight significantly higher than that of the lamps for which they are a
replacement, attention should be drawn to the fact that the increased weight may reduce
the mechanical stability of certain luminaires and lampholders and may impair contact
making and lamp retention.”
---------------------- Page: 17 ----------------------
SIST EN 62560:2013
– 10 – 62560 IEC:2011
d) Special conditions or restrictions which shall be observed for lamp operation, for example
operation in dimming circuits. Where lamps are not suitable for dimming, the following
symbol in Figure 1 may be used:
IEC 928/99
Figure 1 – Dimming not allowed
e) For eye protection, see requirements of IEC/TR 62471-2
5.3 Compliance is checked by the following:
Presence and legibility of the marking required in 5.1 – by visual inspection.
The durability of the marking is checked by trying to remove it by rubbing lightly for 15 s with
a piece of cloth soaked with water and, after drying, for a further 15 s with a piece of cloth
soaked with hexane. The marking shall be legible after the test.
Availability of information required in 5.2 – by visual inspection.
6 Interchangeability
6.1 Cap interchangeability
Interchangeability shall be ensured by the use of caps in accordance with IEC 60061-1 and
gauges in accordance with IEC 60061-3, see Table 1.
Compliance is checked by the use of the relevant gauges.
---------------------- Page: 18 ----------------------
SIST EN 62560:2013
62560 IEC:2011 – 11 –
Table 1 – Interchangeability gauges and lamp cap dimensions
Cap sheet
no.
Cap dimensions to be checked by Gauge sheet no.
Lamp cap from
the gauge from IEC 60061-3
IEC 60061-
1
7006-10
B15d 7004-11 A max. and A min.
D1 max. and
N min. 7006-11
B22d 7004-10
Diametrical position of the pins
Insertion in lampholder 7006-4A
Retention in lampholder 7006-4B
E11 7004-6 “Go” 7006-6
E12 7004-28 “Go” 7006-27H
Additional “Go” 7006-27J
“Not Go” 7006-28C
Contact-making 7006-32
E14 7004-23 Max. dimensions of the screw thread 7006-27F
Min. major diameter of the screw 7006-28B
thread
Dimension S1 7006-27G
Contact making 7006-54
Max. dimensions of the screw thread 7006-27K
Min. major diameter of the screw
E17 7004-26 7006-28F
thread
Contact making 7006-26D
E26 7004-21A Max. dimensions of the screw thread 7006-27D
Min. major diameter of the screw 7006-27E
thread
E27 7004-21 Max. dimensions of the screw thread 7006-27B
Min. major diameter of the screw 7006-28A
thread
Dimension S1 7006-27C
Contact making 7006-50
GU10 7004-121 “Go” and “Not Go” 7006-121
GZ10 7004-120 “Go” and “Not Go” 7006-120
GX53 7004-142 “Go” and “Not Go” 7006-142
“Not Go” 7006-142D
“Go” and “Not Go” for checking 7006-142E
keyways
“Not Go” for checking keyways 7006-142F
---------------------- Page: 19 ----------------------
SIST EN 62560:2013
– 12 – 62560 IEC:2011
6.2 Bending moment, axial pull and mass
The value of the bending moment, imparted by the lamp at the lampholder shall not exceed
the value given in Table 2.
The bending moment shall be determined by measuring the weight of the lamp (e. g. by
means of a balance) at the tip of the bulb of the horizon
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.