EN 61167:2018/A1:2018

Metal halide lamps - Performance specification

This document specifies the performance requirements for metal halide lamps for general lighting purposes. For some of the requirements given in this document, reference is made to "the relevant lamp data sheet". For some lamps, these data sheets are contained in this document. For other lamps, falling under the scope of this document, the relevant data are supplied by the lamp manufacturer or responsible vendor. The requirements of this document relate only to type testing. The requirements and tolerances specified in this document correspond to testing of a type test sample submitted by the manufacturer for that purpose. In principle this type test sample consists of units having characteristics typical of the manufacturer’s production and being as close to the production centre point values as possible. It can be expected that with the tolerances given in this document, the product manufactured in accordance with the type test sample will comply with this document for the majority of production. Due to the production spread however, it is inevitable that there will sometimes be products outside the specified tolerances. For guidance on sampling plans and procedures for inspection by attributes, see ISO 2859-10.

Halogen-Metalldampflampen - Anforderungen an die Arbeitsweise

Lampe aux halogénures métalliques - Spécification de performances

Sijalke s kovinskim halidom - Specifikacija lastnosti (IEC 61167:2018/A1:2018)

General Information

• Status: Published
• Publication Date: 29-Nov-2018
• Withdrawal Date: 26-Nov-2021
• ICS: 29.140.30 - Fluorescent lamps. Discharge lamps
• Technical Committee: CLC/TC 34 - 'Lamps and related equipment
• Drafting Committee: IEC/SC 34A - IEC_SC_34A
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 30-Nov-2018
• Completion Date: 30-Nov-2018
• Directive: 1194/2012 - Commission Regulation (EU) No 1194/2012 of 12 December 2012 implementing Directive 2009/125/EC of the European Parliament and of the Council with regard to ecodesign requirements for directional lamps, light emitting diode lamps and related equipment
• Directive: 2009/125/EC - Directive 2005/32/EC of the European Parliament and of the Council of 6 July 2005 establishing a framework for the setting of ecodesign requirements for energy-using products and amending Council Directive 92/42/EEC and Directives 96/57/EC and 2000/55/EC of the European Parliament and of the Council
• Directive: 2010/30/EU - DIRECTIVE 2010/30/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 19 May 2010 on the indication by labelling and standard product information of the consumption of energy and other resources by energy-related products (recast)
• Directive: 245/2009 - Commission Regulation (EC) No 245/2009 of 18 March 2009 implementing Directive 2005/32/EC of the European Parliament and of the Council with regard to ecodesign requirements for fluorescent lamps without integrated ballast, for high intensity discharge lamps, and for ballasts and luminaires able to operate such lamps, and repealing Directive 2000/55/EC of the European Parliament and of the Council (Text with EEA relevance)
• Directive: 874/2012 - Commission Delegated Regulation (EU) No 874/2012 of 12 July 2012 supplementing Directive 2010/30/EU of the European Parliament and of the Council with regard to energy labelling of electrical lamps and luminaires
• Mandate: M/485 - Mandate to CEN, CENELEC and ETSI for standardisation in the field of fluorescent lamps, high-intensity discharge lamps, ballasts and luminaires able to operate such lamps
• Mandate: M/495 - Standardisation mandate to CEN, CENELEC and ETSI under Directive 2009/125/EC relating to harmonised standards in the field of Ecodesign
• Ref Project: SIST EN 61167:2019/A1:2019 - Metal halide lamps - Performance specification (IEC 61167:2018/A1:2018)

Relations

• Amends: EN 61167:2018 - Metal halide lamps - Performance specification
• Effective Date: 06-Mar-2018

Standards Content (Sample)

SLOVENSKI STANDARD
01-februar-2019
Sijalke s kovinskim halidom - Specifikacija lastnosti (IEC 61167:2018/A1:2018)
Metal halide lamps - Performance specification (IEC 61167:2018/A1:2018)
Halogen-Metalldampflampen - Anforderungen an die Arbeitsweise (IEC
61167:2018/A1:2018)
Lampe aux halogénures métalliques - Spécification de performances (IEC
61167:2018/A1:2018)
Ta slovenski standard je istoveten z: EN 61167:2018/A1:2018
ICS:
29.140.30 )OXRUHVFHQþQHVLMDONH6LMDONH Fluorescent lamps.
Discharge lamps
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 61167:2018/A1

NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2018
ICS 29.140.30
English Version
Metal halide lamps - Performance specification
(IEC 61167:2018/A1:2018)
Lampe aux halogénures métalliques - Spécifications de Halogen-Metalldampflampen - Anforderungen an die
performances Arbeitsweise
(IEC 61167:2018/A1:2018) (IEC 61167:2018/A1:2018)
This amendment A1 modifies the European Standard EN 61167:2018; it was approved by CENELEC on 2018-11-27. CENELEC members
are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the status of a
national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 61167:2018/A1:2018 E

European foreword
The text of document 34A/2066/CDV, future IEC 61167/A1, prepared by SC 34A "Lamps" of
IEC/TC 34 "Lamps and related equipment" was submitted to the IEC-CENELEC parallel vote and
approved by CENELEC as EN 61167:2018/A1:2018.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2019-08-27
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting wit
...