prEN IEC 62626-1:2023
(Main)Low-voltage switchgear and controlgear enclosed equipment - Part 1: Additional requirements for enclosed switch-disconnectors according to IEC 60947-3 to provide isolation of electrical equipment during repair and maintenance work in specific applications
Low-voltage switchgear and controlgear enclosed equipment - Part 1: Additional requirements for enclosed switch-disconnectors according to IEC 60947-3 to provide isolation of electrical equipment during repair and maintenance work in specific applications
Gekapselte Niederspannungsschaltgeräte – Teil 1: Zusätzliche Anforderungen für gekapselte Lasttrennschalter nach IEC 60947-3, um die Anforderung der Trennfunktion elektrischer Betriebsmittel während Reparatur- und Wartungsarbeiten in bestimmten Anwendungen sicherzustellen
Appareillage à basse tension sous enveloppe - Partie 1: Exigences supplémentaires relatives aux interrupteurs-sectionneurs sous enveloppe conformément à l’IEC 60947-3 pour isoler le matériel électrique lors des travaux de réparation et de maintenance dans des applications spécifiques
Oprema, vgrajena v nizkonapetostne stikalne in krmilne naprave - 1. del: Dodatne zahteve za zaprta ločilna stikala v skladu s standardom IEC 60947-3 za zagotavljanje izolacije električne opreme med popravljalnimi in vzdrževalnimi deli za posebno uporabo
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN IEC 62626-1:2023
01-april-2023
Oprema, vgrajena v nizkonapetostne stikalne in krmilne naprave - 1. del: Dodatne
zahteve za zaprta ločilna stikala v skladu s standardom IEC 60947-3 za
zagotavljanje izolacije električne opreme med popravljalnimi in vzdrževalnimi deli
za posebno uporabo
Low-voltage switchgear and controlgear enclosed equipment - Part 1: Additional
requirements for enclosed switch-disconnectors according to IEC 60947-3 to provide
isolation of electrical equipment during repair and maintenance work in specific
applications
Appareillage à basse tension sous enveloppe - Partie 1: Interrupteur-sectionneur en
coffret, en dehors du domaine d'application de la norme CEI 60947-3, destiné à garantir
l'isolation pendant les phases de maintenance
Ta slovenski standard je istoveten z: prEN IEC 62626-1:2023
ICS:
29.130.20 Nizkonapetostne stikalne in Low voltage switchgear and
krmilne naprave controlgear
oSIST prEN IEC 62626-1:2023 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN IEC 62626-1:2023
---------------------- Page: 2 ----------------------
oSIST prEN IEC 62626-1:2023
121A/541/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 62626-1 ED2
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2023-01-27 2023-04-21
SUPERSEDES DOCUMENTS:
121A/510/CD, 121A/523A/CC
IEC SC 121A : LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR
SECRETARIAT: SECRETARY:
France Mr Michaël LAHEURTE
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:
TC 23,SC 121B
Other TC/SCs are requested to indicate their interest, if
any, in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of
• any relevant patent rights of which they are aware and to provide supporting documentation,
• any relevant “in some countries” clauses to be included should this proposal proceed. Recipients are
reminded that the enquiry stage is the final stage for submitting "in some countries" clauses. See
AC/22/2007.
TITLE:
Low-voltage switchgear and controlgear enclosed equipment - Part 1: Additional requirements
for enclosed switch-disconnectors according to IEC 60947-3 to provide isolation of electrical
equipment during repair and maintenance work in specific applications
PROPOSED STABILITY DATE: 2026
NOTE FROM TC/SC OFFICERS:
SC121A Officers support circulation of CDV for project IEC 62626-1 ED2.
Secretary Note: NC experts are kindly requested to refer their comments to line numbers.
Copyright © 2023 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to
download this electronic file, to make a copy and to print out the content for the sole purpose of preparing National
Committee positions. You may not copy or "mirror" the file or printed version of the document, or any part of it,
for any other purpose without permission in writing from IEC.
---------------------- Page: 3 ----------------------
oSIST prEN IEC 62626-1:2023
IEC CDV 62626-1 © IEC 2022 2 121A/541/CDV
1 CONTENTS
2
3 FOREWORD. 3
4 INTRODUCTION . 5
5 1 Scope . 6
6 2 Normative references . 6
7 3 Terms, definitions, symbols and reference clauses . 7
8 4 Classification . 7
9 5 Characteristics . 7
10 6 Product information . 7
11 6.1 Nature of information . 7
12 6.2 Markings . 8
13 6.2.1 Front-marking . 8
14 6.2.2 Additional marking . 8
15 7 Normal service, mounting and transport conditions . 8
16 8 Constructional and performance requirements . 9
17 8.1 Constructional requirements . 9
18 8.1.1 General . 9
19 8.1.2 Locking . 9
20 8.1.3 Environmental influences . 9
21 8.1.4 Mechanical strength . 9
22 8.1.5 Degree of protection . 9
23 8.1.6 Operation/actuation . 9
24 8.2 Performance requirements . 9
25 8.2.1 General . 9
26 8.2.2 Switching capacity . 9
27 9 Tests . 9
28 9.1 General . 9
29 9.2 Type tests . 9
30 Bibliography . 11
31
32 Figure 1 – Symbol for marking according to this standard . 8
33
34 Table 1 – Requirements and tests for devices . 10
35
36
---------------------- Page: 4 ----------------------
oSIST prEN IEC 62626-1:2023
IEC CDV 62626-1 © IEC 2022 3 121A/541/CDV
37 INTERNATIONAL ELECTROTECHNICAL COMMISSION
38 ____________
39
40 LOW-VOLTAGE SWITCHGEAR AND
41 CONTROLGEAR ENCLOSED EQUIPMENT –
42
43 Part 1: Additional requirements for enclosed switch-disconnectors
44 according to IEC 60947-3 to provide isolation of electrical equipment
45 during repair and maintenance work in specific applications
46
47 FOREWORD
48 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
49 all national electrotechnical committees (IEC National Committees). The object of IEC is to promote intern ational
50 co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
51 in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
52 Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
53 preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
54 may participate in this preparatory work. International, governmental and non-governmental organizations liaising
55 with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
56 Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
57 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
58 consensus of opinion on the relevant subjects since each technical committee has representation from all
59 interested IEC National Committees.
60 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
61 Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
62 Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
63 misinterpretation by any end user.
64 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
65 transparently to the maximum extent possible in their national and regional publications. Any divergence between
66 any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
67 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
68 assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
69 services carried out by independent certification bodies.
70 6) All users should ensure that they have the latest edition of this publication.
71 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
72 members of its technical committees and IEC National Committees for any personal injury, property damage or
73 other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
74 expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
75 Publications.
76 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
77 indispensable for the correct application of this publication.
78 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
79 rights. IEC shall not be held responsible for identifying any or all such patent rights.
80 International Standard IEC 62626-1 has been prepared by subcommittee SC121A: Low-voltage
81 switchgear and controlgear, of IEC technical committee 121: Switchgear and controlgear.
82 The text of this standard is based on the following documents:
FDIS Report on voting
83
84 Full information on the voting for the approval of this standard can be found in the report on
85 voting indicated in the above table.
86 This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
87 A list of all parts in the IEC 62626 series, published under the general title Low-voltage
88 switchgear and controlgear enclosed equipment, can be found on the IEC website.
---------------------- Page: 5 ----------------------
oSIST prEN IEC 62626-1:2023
IEC CDV 62626-1 © IEC 2022 4 121A/541/CDV
89 The committee has decided that the contents of this publication will remain unchanged until the
90 stability date indicated on the IEC web site under "http://webstore.iec.ch" in the data related to
91 the specific publication. At this date, the publication will be
92 • reconfirmed,
93 • withdrawn,
94 • replaced by a revised edition, or
95 • amended.
96
97
---------------------- Page: 6 ----------------------
oSIST prEN IEC 62626-1:2023
IEC CDV 62626-1 © IEC 2022 5 121A/541/CDV
98 INTRODUCTION
99 Enclosed switch-disconnectors covered by this part of IEC 62626 are intended for use in various
100 applications, to provide isolation of electrical equipment, especially motor circuits, during repair,
101 cleaning and maintenance works.
102 Such enclosed switch-disconnectors are sometimes known as “maintenance switches”, or
103 “safety switches”. The name “safety switch” is also used for safety related position switches,
104 inspection switches and switches for other ap
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.