Low-voltage switchgear and controlgear - Part 6-2: Multiple function equipment - Control and protective switching devices (or equipment) (CPS)

Applies to control and protective switching devices (or equipment) (CPS), the main contacts of which are intended to be connected to circuits of rated voltage not exceeding 1 000 V a.c. or 1 500 V d.c. CPSs are intended to provide both protective and control functions for circuits and are operated otherwise than by hand. They may also fulfil additional functions, such as isolation.

Niederspannungsschaltgeräte - Teil 6-2: Mehrfunktions-Schaltgeräte - Steuer- und Schutz-Schaltgeräte (CPS)

Appareillage à basse tension - Partie 6-2: Matériels à fonctions multiples - Appareils (ou matériel) de connexion de commande de protection (ACP)

Est applicable aux appareils (ou aux matériels) de connexion de commande et de protection (ACP), dont les contacts principaux sont destinés à être reliés à des circuits dont la tension assignée n'est pas supérieure a 1 000 V en courant alternatif ou 1 500 V en courant continu. Les ACP sont destinés à assurer à la fois les fonctions de commande et de protection et peuvent aussi assurer des fonctions complémentaires telles que le sectionnement.

Nizkonapetostne stikalne in krmilne naprave - 6-2. del: Večfunkcijska oprema - Krmilne in zaščitne stikalne naprave (ali oprema) (CPS) (IEC 60947-6-2:2020 + COR1:2021)

Uporablja se za krmilne in zaščitne stikalne naprave (ali opremo) (CPS), katerih glavni kontakti so namenjeni za povezavo s tokokrogi, katerih nazivna napetost ne presega 1000 V izmenične ali 1500 V enosmerne napetosti. Centralni napajalni sistemi so namenjeni za zagotavljanje tako zaščitnih kot nadzornih funkcij za tokokroge in se jih ne upravlja ročno. Prav tako lahko opravljajo dodatne funkcije, kot je izolacija.

General Information

Status
Published
Publication Date
02-Mar-2023
Withdrawal Date
19-Sep-2021
Current Stage
6060 - Document made available - Publishing
Start Date
03-Mar-2023
Completion Date
03-Mar-2023

Relations

Buy Standard

Standard
EN IEC 60947-6-2:2023 - BARVE
English language
116 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 60947-6-2:2023
01-maj-2023
Nizkonapetostne stikalne in krmilne naprave - 6-2. del: Večfunkcijska oprema -
Krmilne in zaščitne stikalne naprave (ali oprema) (CPS) (IEC 60947-6-2:2020 +
COR1:2021)
Low-voltage switchgear and controlgear - Part 6-2: Multiple function equipment - Control
and protective switching devices (or equipment) (CPS) (IEC 60947-6-2:2020 +
COR1:2021)
Niederspannungsschaltgeräte - Teil 6-2: Mehrfunktions-Schaltgeräte - Steuer- und
Schutz-Schaltgeräte (CPS) (IEC 60947-6-2:2020 + COR1:2021)
Appareillage à basse tension - Partie 6-2: Matériels à fonctions multiples - Appareils (ou
matériel) de connexion de commande de protection (ACP) (IEC 60947-6-2:2020 +
COR1:2021)
Ta slovenski standard je istoveten z: EN IEC 60947-6-2:2023
ICS:
29.130.20 Nizkonapetostne stikalne in Low voltage switchgear and
krmilne naprave controlgear
SIST EN IEC 60947-6-2:2023 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 60947-6-2:2023

---------------------- Page: 2 ----------------------
SIST EN IEC 60947-6-2:2023


EUROPEAN STANDARD EN IEC 60947-6-2

NORME EUROPÉENNE

EUROPÄISCHE NORM March 2023
ICS 29.120.40; 29.130.20 Supersedes EN 60947-6-2:2003;
EN 60947-6-2:2003/A1:2007
English Version
Low-voltage switchgear and controlgear - Part 6-2: Multiple
function equipment - Control and protective switching devices (or
equipment) (CPS)
(IEC 60947-6-2:2020 + COR1:2021)
Appareillage à basse tension - Partie 6-2: Matériels à Niederspannungsschaltgeräte - Teil 6-2: Mehrfunktions-
fonctions multiples - Appareils (ou matériel) de connexion Schaltgeräte - Steuer- und Schutz-Schaltgeräte (CPS)
de commande de protection (ACP) (IEC 60947-6-2:2020 + COR1:2021)
(IEC 60947-6-2:2020 + COR1:2021)
This European Standard was approved by CENELEC on 2021-01-19. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 60947-6-2:2023 E

---------------------- Page: 3 ----------------------
SIST EN IEC 60947-6-2:2023
EN IEC 60947-6-2:2023 (E)
European foreword
The text of document 121A/384/FDIS, future edition 3 of IEC 60947-6-2, prepared by SC 121A "Low-
voltage switchgear and controlgear" of IEC/TC 121 "Switchgear and controlgear and their assemblies
for low voltage" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
EN IEC 60947-6-2:2023.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2023-12-03
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2026-03-03
document have to be withdrawn

This document supersedes EN 60947-6-2:2003 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a Standardization Request given to CENELEC by the
European Commission and the European Free Trade Association.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 60947-6-2:2020 was approved by CENELEC as a
European Standard without any modification.
In the offi
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.