EN 60384-23:2005

Fixed capacitors for use in electronic equipment - Part 23: Sectional specification - Fixed surface mount metallized polyethylene naphthalate film dielectric DC capacitors

is applicable to fixed surface mount capacitors for direct current, with metallized electrodes and polyethylene naphthalate dielectric for use in electronic equipment. These capacitors have metallized connecting pads or soldering strips and are intended to be mounted directly onto substrates for hybrid circuits or onto printed boards. These capacitors may have self healing properties depending on conditions of use. They are primarily intended for applications where the AC component is small with respect to the rated voltage.

Festkondensatoren zur Verwendung in Geräten der Elektronik - Teil 23: Rahmenspezifikation - Oberflächenmontierbare metallisierte Polyethylen-Naphthalat-Folienkondensatoren für Gleichspannung

Condensateurs fixes utilisés dans les équipements électroniques - Partie 23: Spécification intermédiaire - Condensateurs fixes pour montage en surface pour courant continu à diélectrique en film de polyéthylène naphtalate métallisé

PE

Pritrjeni kondenzatorji za uporabo v elektronski opremi – 23. del: Področna specifikacija – Pritrjeni DC kondenzatorji za površinsko namestitev z dielektrikom iz metaliziranega polietilenskega naftalatnega filma (IEC 60384-23:2005)

General Information

• Status: Withdrawn
• Publication Date: 24-Feb-2005
• Withdrawal Date: 31-Jan-2008
• ICS: 31.060.10 - Fixed capacitors
• Technical Committee: CLC/TC 40XA - CLC/TC 40XA
• Drafting Committee: IEC/TC 40 - IEC_TC_40
• Parallel Committee: IEC/TC 40 - IEC_TC_40
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 03-Jun-2018
• Completion Date: 03-Jun-2018
• Ref Project: SIST EN 60384-23:2005 - Fixed capacitors for use in electronic equipment -- Part 23: Sectional specification - Fixed surface mount metallized polyethylene naphthalate film dielectric DC capacitors

Relations

• Replaced By: EN 60384-23:2015 - Fixed capacitors for use in electronic equipment - Part 23: Sectional specification - Fixed surface mount metallized polyethylene naphthalate film dielectric DC capacitors
• Effective Date: 29-Jan-2023

Standards Content (Sample)

SLOVENSKI SIST EN 60384-23:2005

STANDARD
december 2005
Pritrjeni kondenzatorji za uporabo v elektronski opremi – 23. del: Področna
specifikacija – Pritrjeni DC kondenzatorji za površinsko namestitev z
dielektrikom iz metaliziranega polietilenskega naftalatnega filma (IEC 60384-
23:2005)
Fixed capacitors for use in electronic equipment – Part 23: Sectional specification –
Fixed surface mount metallized polyethylene naphthalate film dielectric DC
capacitors (IEC 60384-23:2005)
ICS 31.060.10 Referenčna številka
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

EUROPEAN STANDARD EN 60384-23
NORME EUROPÉENNE
EUROPÄISCHE NORM February 2005

ICS 31.060.10
English version
Fixed capacitors for use in electronic equipment
Part 23: Sectional specification –
Fixed surface mount metallized polyethylene naphthalate
film dielectric DC capacitors
(IEC 60384-23:2005)
Condensateurs fixes utilisés  Festkondensatoren zur Verwendung
dans les équipements électroniques in Geräten der Elektronik
Partie 23: Spécification intermédiaire Teil 23: Rahmenspezifikation –
Condensateurs fixes pour montage Oberflächenmontierbare metallisierte
en surface pour courant continu Polyethylen-Naphthalat-
à diélectrique en film de polyéthylène Folienkondensatoren für Gleichspannung
naphtalate métallisé (IEC 60384-23:2005)
(CEI 60384-23:2005)
This European Standard was approved by CENELEC on 2005-02-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden,
Switzerland and United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels

© 2005 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 60384-23:2005 E
Foreword
The text of document 40/1503/FDIS, future edition 1 of IEC 60384-23, prepared by IEC TC 40,
Capacitors and resistors for electronic equipment, was submitted to the IEC-CENELEC parallel vote
and was approved by CENELEC as EN 60384-23 on 2005-02-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2005-12-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2008-02-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60384-23:2005 was approved by CENELEC as a European
Standard without any modification.
__________
- 3 - EN 60384-23:2005
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE Where an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
IEC 60062 2004 Marking codes for resistors and - -
capacitors
IEC 60063 1963 Preferred number series for resistors and - -
capacitors
A1 1967 - -
A2 1977 - -
1) 2)
IEC 60068-1 - Environmental testing EN 60068-1 1994
Part 1: General and guidance
IEC 60384-1 1999 Fixed capacitors for use in electronic EN 60384-1 2001
(mod) equipment + Corr. October 2001
Part 1: Generic specification
1)
IEC 60410 - Sampling plans and procedures for - -
inspection by attributes
ISO 3 1973 Preferred numbers - Series of preferred - -
numbers
1)
Undated reference.
2)
Valid edition at date of issue.

NORME CEI
INTERNATIONALE IEC
60384-23
INTERNATIONAL
Première édition
STANDARD
First edition
2005-02
Condensateurs fixes utilisés
dans les équipements électroniques –
Partie 23:
Spécification intermédiaire –
Condensateurs fixes pour montage en surface
pour courant continu à diélectrique en film
de polyéthylène naphtalate métallisé
Fixed capacitors for use in electronic equipment –
Part 23:
Sectional specification –
Fixed surface mount metallized polyethylene
naphthalate film dielectric DC capacitors
© IEC 2006 Droits de reproduction réservés ⎯ Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including
électronique ou mécanique, y compris la photocopie et les photocopying and microfilm, without permission in writing from
microfilms, sans l'accord écrit de l'éditeur. the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: [phone] Telefax: [phone] E-mail: [e-mail] Web: www.iec.ch
CODE PRIX
PRICE CODE T
Commission Electrotechnique Internationale
International Electrotechnical Commission
ɆɟɠɞɭɧɚɪɨɞɧɚɹɗɥɟɤɬɪɨɬɟɯɧɢɱɟɫɤɚɹɄɨɦɢɫɫɢɹ
Pour prix, voir catalogue en vigueur
For price, see current catalogue

60384-23 ¤ IEC:2006 – 3 –
CONTENTS
FOREWORD.5
1 General .11
1.1 Scope.11
1.2 Object .11
1.3 Normative references .11
1.4 Information to be given in a detail specification .13
1.5 Terms and definitions .15
1.6 Marking .15
2 Preferred ratings and characteristics .17
2.1 Preferred characteristics .17
2.2 Preferred values of ratings .19
3 Quality assessment procedures.19
3.1 Primary stage of manufacture.19
3.2 Structurally similar components.19
3.3 Certified records of released lots.21
3.4 Qualification approval.21
3.5 Quality conformance inspection.33
4 Test and measurement procedures.37
4.1 Mounting .37
4.2 Visual examination and check of dimensions.37
4.3 Electrical tests.37
4.4 Shear .43
4.5 Substrate bending test .43
4.6 Resistance to soldering heat .43
4.7 Solderability .43
4.8 Rapid change of temperature .45
4.9 Climatic sequence .45
4.10 Damp heat, steady state.47
4.11 Endurance.47
4.12 Charge and discharge .49
4.13 Component solvent resistance (if applicable).49
4.14 Solvent resistance of the marking (if applicable).49
Table 1 – Fixed sample size test plan for qualification approval Assessment level EZ.23
Table 2 – Test schedule for qualification approval.25
Table 3 – Lot-by-lot inspection .35
Table 4 – Periodic tests .35
Table 5 – Test voltages.37
Table 6 – Tangent of loss angle limits.39
Table 7 – Requirements insulation resistance .41
Table 8 – Correction factor dependent on test temperature.41
Table 9 – Endurance test Grade 1 and Grade 2 capacitors .47
Table 10 – Endurance test Grade 3 capacitors.47

60384-23 ¤ IEC:2006 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
_____________
FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT –
Part 23: Sectional specification –
Fixed surface mount metallized polyethylene naphthalate film
dielectric DC capacitors
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the c
...