EN IEC 62386-253:2023
(Main)Digital addressable lighting interface - Part 253: Particular requirements - Diagnostics and maintenance (device type 52)
Digital addressable lighting interface - Part 253: Particular requirements - Diagnostics and maintenance (device type 52)
IEC 62386-253:2023 specifies the information related to diagnostics and maintenance information accessible through memory banks. This document builds on the digital addressable lighting interface as specified in the IEC 62386 series, by adding specific requirements for data exchange. The information given for light sources in this document is specific to LED light sources. This document is only applicable to control gear complying with IEC 62386-102.
Digital adressierbare Schnittstelle für die Beleuchtung - Teil 253: Besondere Anforderungen - Diagnose und Wartung (Gerätetyp 52)
Interface d'éclairage adressable numérique - Partie 253: Exigences particulières - Diagnostic et maintenance (type de dispositif 52)
L'IEC 62386-253:2023 spécifie les informations relatives au diagnostic et à la maintenance, accessibles à partir des blocs de mémoire. Le présent document enrichit l'interface d'éclairage adressable numérique spécifiée dans la série IEC 62386, en ajoutant des exigences spécifiques à l'échange de données. Dans le présent document, les informations fournies pour les sources de lumière s'appliquent aux sources de lumière à LED. Ce document ne s'applique qu'aux appareillages de commande conformes à la norme IEC 62386-102.
Digitalni naslovljivi vmesnik za razsvetljavo - 253. del: Posebne zahteve - Diagnostika in vzdrževanje (naprava tipa 52) (IEC 62386-253:2023)
Standard IEC 62386-253:2023 določa informacije v zvezi z diagnostiko in vzdrževanjem, ki so dostopne prek pomnilniških bank. Ta dokument temelji na digitalno naslovljivem vmesniku za razsvetljavo, kot je določeno v skupini standardov IEC 62386, z dodanimi posebnimi zahtevami za izmenjavo podatkov. Informacije, podane v tem dokumentu za svetlobne vire, se navezujejo na vire LED-svetlobe.
Ta dokument se uporablja samo za krmilno opremo, ki je skladna s standardom IEC 62386-102.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-julij-2023
Digitalni naslovljivi vmesnik za razsvetljavo - 253. del: Posebne zahteve -
Diagnostika in vzdrževanje (naprava tipa 52) (IEC 62386-253:2023)
Digital addressable lighting interface - Part 253: Particular requirements - Diagnostics
and maintenance (Device Type 52) (IEC 62386-253:2023)
Digital adressierbare Schnittstelle für die Beleuchtung - Teil 253: Besondere
Anforderungen - Diagnose und Wartung (Gerätetyp 52) (IEC 62386-253:2023)
Interface d'éclairage adressable numérique - Partie 253: Exigences particulières -
Diagnostic et maintenance (type de dispositif 52) (IEC 62386-253:2023)
Ta slovenski standard je istoveten z: EN IEC 62386-253:2023
ICS:
29.140.50 Instalacijski sistemi za Lighting installation systems
razsvetljavo
35.200 Vmesniška in povezovalna Interface and interconnection
oprema equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN IEC 62386-253
NORME EUROPÉENNE
EUROPÄISCHE NORM May 2023
ICS 29.140.50; 29.140.99
English Version
Digital addressable lighting interface - Part 253: Particular
requirements - Diagnostics and maintenance (device type 52)
(IEC 62386-253:2023)
Interface d'éclairage adressable numérique - Partie 253: Digital adressierbare Schnittstelle für die Beleuchtung - Teil
Exigences particulières - Diagnostic et maintenance (type 253: Besondere Anforderungen - Diagnose und Wartung
de dispositif 52) (Gerätetyp 52)
(IEC 62386-253:2023) (IEC 62386-253:2023)
This European Standard was approved by CENELEC on 2023-05-19. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 62386-253:2023 E
European foreword
The text of document 34/1021/FDIS, future edition 1 of IEC 62386-253, prepared by IEC/TC 34
"Lighting" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2024-02-19
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2026-05-19
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
This document is read in conjunction with EN IEC 62386-101 and EN IEC 62386-102.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 62386-253:2023 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standard indicated:
IEC 62386-217 NOTE Approved as EN IEC 62386-217
IEC 62386-222 NOTE Approved as EN IEC 62386-222
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the
relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cencenelec.eu.
Publication Year Title EN/HD Year
IEC 62386-101 2022 Digital addressable lighting interface - Part EN IEC 62386-101 2022
101: General requirements - System
components
IEC 62386-102 2022 Digital addressable lighting interface - Part EN IEC 62386-102 2022
102: General requirements - Control gear
IEC 62722-2-1 2023 Luminaire performance - Part 2-1: EN IEC 62722-2-1 2023
Particular requirements - LED luminaires
IEC 62386-253 ®
Edition 1.0 2023-04
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Digital addressable lighting interface –
Part 253: Particular requirements – Diagnostics and maintenance (device
type 52)
Interface d'éclairage adressable numérique –
Partie 253: Exigences particulières – Diagnostic et maintenance (type de
dispositif 52)
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.140.50, 29.140.99 ISBN 978-2-8322-6787-5
– 2 – IEC 62386-253:2023 IEC 2023
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 8
2 Normative references . 8
3 Terms and definitions . 8
4 General . 8
4.1 General . 8
4.2 Version number . 9
4.3 Restricting device type support . 9
5 Electrical specification . 9
6 Bus power supply . 9
7 Transmission protocol structure . 9
8 Timing . 9
9 Method of operation . 9
9.1 General . 9
9.2 Memory banks . 9
9.2.1 General . 9
9.2.2 Accuracy of measurements . 9
9.2.3 Rounding of measurement values . 9
9.2.4 Refresh rate of memory bank values . 10
9.2.5 No overflow of counters . 10
9.2.6 Failure condition flags and failure condition counters related to control
gear . 10
9.2.7 Behaviour of "controlGearFailure" . 10
9.2.8 Failure condition flags and failure condition counters related to light
source . 10
9.2.9 Behaviour of "lampFailure" . 11
9.2.10 Hold-off time for failure condition flags . 11
9.2.11 Memory bank 205, control gear diagnostics and maintenance . 11
9.2.12 Memory bank 206, light source diagnostics and maintenance . 19
9.2.13 Memory bank 207, luminaire maintenance data . 23
10 Declaration of variables . 24
11 Definition of commands . 25
11.1 General . 25
11.2 Overview sheets . 25
11.3 Application extended commands . 25
11.4 Special commands . 25
11.4.1 General . 25
11.4.2 ENABLE DEVICE TYPE (data) . 25
Bibliography . 26
Figure 1 – IEC 62386 graphical overview . 6
IEC 62386-253:2023 IEC 2023 – 3 –
Table 1 – Failure condition flags and failure condition counters related to control gear . 10
Table 2 – Failure condition flags and failure condition counters related to light source . 10
Table 3 – Memory bank 205, control gear diagnostics and maintenance . 12
Table 4 – Memory bank 206, light source diagnostics and maintenance . 19
Table 5 – Memory bank 207, luminaire maintenance data . 23
Table 6 – Declaration of variables . 25
Table 7 – Commands . 25
– 4 – IEC 62386-253:2023 IEC 2023
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
DIGITAL ADDRESSABLE LIGHTING INTERFACE –
Part 253: Particular requirements –
Diagnostics and maintenance (device type 52)
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as "IEC Publication(s)"). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.